<root>
<document scada='0' schema='103' license='10,28966362,0EXP2Y' title='' description='' fcversion='655361' target='PIC.18F.18F46K22' >
	<config data='!0,f800!10,fcff!20,fb00!30,bb!40,ffff!50,ffff!60,ffff%8,8%c,1%d,1%e,1%f,1%10,1%11,3%13,3%18,0%1a,f%28,1%29,1%2a,0%2b,1%2c,1%2d,1%2f,1%30,1%32,0%36,0%37,1%40,1%41,1%42,1%43,1%4e,1%4f,1%50,1%51,1%52,1%53,1%5d,1%5e,1%5f,1%60,1%61,1%62,1%63,1%6e,1' clkspd='16000000' simspd='0' usewdt='0' constif='0' Use3V3='0' />
	<plugins >
		<dll_models enabled='1' />
	</plugins>
	<supplement use='0' head='' body='' />
	<debug />
	<traces />
	<ghost >
		<FK2 >
			<data name='FK2D0' port='4294967295' pin='4294967295' />
			<data name='FK2D1' port='4294967295' pin='4294967295' />
			<data name='FK2D2' port='4294967295' pin='4294967295' />
			<data name='FK2D3' port='4294967295' pin='4294967295' />
			<data name='FK2D4' port='4294967295' pin='4294967295' />
			<data name='FK2D5' port='4294967295' pin='4294967295' />
			<data name='FK2D6' port='4294967295' pin='4294967295' />
			<data name='FK2D7' port='4294967295' pin='4294967295' />
			<data name='FK2D8' port='4294967295' pin='4294967295' />
			<data name='FK2D9' port='4294967295' pin='4294967295' />
			<data name='FK2D10' port='4294967295' pin='4294967295' />
			<data name='FK2D11' port='4294967295' pin='4294967295' />
			<data name='FK2D12' port='4294967295' pin='4294967295' />
			<data name='FK2D13' port='4294967295' pin='4294967295' />
			<data name='FK2D14' port='4294967295' pin='4294967295' />
			<data name='FK2D15' port='4294967295' pin='4294967295' />
			<data name='FK2A0' port='4294967295' pin='4294967295' />
			<data name='FK2A1' port='4294967295' pin='4294967295' />
			<data name='FK2A2' port='4294967295' pin='4294967295' />
			<data name='FK2A3' port='4294967295' pin='4294967295' />
			<data name='FK2A4' port='4294967295' pin='4294967295' />
			<data name='FK2A5' port='4294967295' pin='4294967295' />
		</FK2>
		<ICD >
			<data name='AnalogPrescaleValue' value='19' />
			<data name='DigitalSampleRate' value='100000' />
			<data name='BreakpointCount' value='8' />
			<data name='CallStackDepthCount' value='8' />
			<data name='ClockPort' value='1' />
			<data name='ClockPin' value='6' />
			<data name='DataPort' value='1' />
			<data name='DataPin' value='7' />
			<data name='UseDefaultPins' value='1' />
			<data name='WrapEnabled' value='1' />
			<data name='CommsDelayOverridden' value='0' />
			<data name='CommsDelay' value='11' />
			<data name='CalculatedCommsDelay' value='11' />
			<data name='AnalogEB2PrescaleValue' value='2' />
			<data name='DigitalEB2SampleRate' value='100000' />
		</ICD>
		<pins >
			<digital A='0' B='0' C='0' D='0' E='0' F='0' G='0' H='0' I='0' J='0' K='0' L='0' M='0' N='0' O='0' P='0' Q='0' R='0' S='0' T='0' U='0' V='0' W='0' X='0' Y='0' Z='0' />
			<analog A='0' B='0' C='0' D='0' E='0' F='0' G='0' H='0' I='0' J='0' K='0' L='0' M='0' N='0' O='0' P='0' Q='0' R='0' S='0' T='0' U='0' V='0' W='0' X='0' Y='0' Z='0' />
		</pins>
	</ghost>
	<components >
		<settings autoimg='0' center='1' unitscale='0' fixedscale='0' fixedx='25' fixedy='25' fixedz='25' headcode='0' />
		<definition guid='9761554c-23f5-4064-9d60-6d4cfdb2d259' vstate='40' vmin='0' vmaj='1' srcleaf='' visiblename='' description='' category='' category2='' category3='' bIs2dOnly='0' bIs3dOnly='0' catenable='1' author='' manuname='' manucode='' sysinfo='0' keywords='' dynamic='1' scadaCompatible='0' embeddedCompatible='1' showmacros='1' iconpath='' />
		<component class_type='root' codename='ComponentRoot' panelId='-1' x='0' y='0' z='0' xsz='1' ysz='1' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' scadavisible='1' interactive='1' solid='1' layer='0' poslock='0' comp2dType='0' >
			<resources />
			<properties />
			<values />
			<events />
			<apis />
			<variables >
				<variable public='0' >
					<def class_type='variable' name='Rx' type='T8' description='Generic Receive string' isconst='0' isHidden='0' isinit='1' usrinit='&quot;&quot;' setinit='&quot;&quot;' >
						<array size='20' />
					</def>
				</variable>
				<variable public='0' >
					<def class_type='variable' name='false' type='b1' description='' isconst='1' isHidden='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='SSID' type='T8' description='SSID to connect to' isconst='0' isHidden='0' isinit='1' usrinit='&quot;ESP-AP&quot;' setinit='&quot;ESP-AP&quot;' >
						<array size='20' />
					</def>
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Data' type='u8' description='Generic Data' isconst='0' isHidden='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Password' type='T8' description='SSID Password' isconst='0' isHidden='0' isinit='1' usrinit='&quot;12345678&quot;' setinit='&quot;12345678&quot;' >
						<array size='20' />
					</def>
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Ret' type='u8' description='Generic Rerturn value' isconst='0' isHidden='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='true' type='b1' description='' isconst='1' isHidden='0' isinit='1' usrinit='1' setinit='1' />
				</variable>
			</variables>
			<macros >
				<macro >
					<flowline name='ESP_Setup' description='' statediag='0' >
						<return name='Return' type='v0' description='' isconst='0' isHidden='0' isinit='0' usrinit='' setinit='' />
						<command class_type='comment' title='' comment='This will create an Access Point based on whatever
SSID &amp; Password you entered.

Once created it will send its IP Address out on UART. Take note of this.' textarea='12,0,12,0' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' />
						<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
							<argument exp='&quot;Create AP\r\n&quot;' />
						</command>
						<command class_type='call' title='Create Access Point' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='WLAN_ESP8266' macro='CreateAccessPoint' >
							<return exp='Ret' />
							<argument exp='SSID' />
							<argument exp='Password' />
							<argument exp='4' />
							<argument exp='4' />
						</command>
						<command class_type='delay' title='Delay' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='5' type='2' />
						<command class_type='decision' title='IF Connected' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='Ret = 1' swap='0' >
							<flowline >
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;AP Created\r\n&quot;' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;SSID = &quot;' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='SSID' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;\r\n&quot;' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;Password = &quot;' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='Password' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;\r\n&quot;' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;Get ESP Server IP\r\n&quot;' />
								</command>
								<command class_type='call' title='Get Server IP' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='WLAN_ESP8266' macro='CheckTCPServerIP' >
									<return exp='Rx' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;IP = &quot;' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='Rx' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;  -  Take Note of This\r\n&quot;' />
								</command>
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;Start Server\r\n&quot;' />
								</command>
								<command class_type='call' title='Enable Server on Port 80' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='WLAN_ESP8266' macro='ControlTCPServer' >
									<return exp='Ret' />
									<argument exp='1' />
									<argument exp='80' />
								</command>
								<command class_type='decision' title='If Enabled' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='Ret = 1' swap='0' >
									<flowline >
										<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
											<argument exp='&quot;Start OK\r\n&quot;' />
										</command>
										<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
											<argument exp='&quot;Waiting for Data\r\n&quot;' />
										</command>
										<command class_type='call' title='Component Macro' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='CircularBuffer1' macro='FlushBuffer' />
										<command class_type='comment' title='' comment='At this point we have intitialised all components and setup
the ESP8266 to receive incoming data' textarea='12,0,12,0' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' />
									</flowline>
									<flowline >
										<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
											<argument exp='&quot;Server Start Fail\r\n&quot;' />
										</command>
										<command class_type='delay' title='Delay' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='5' type='2' />
										<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
											<argument exp='&quot;Reset\r\n&quot;' />
										</command>
										<command class_type='native' title='C Code' ccode='RESET();' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' language='C' />
									</flowline>
								</command>
							</flowline>
							<flowline >
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;Create AP Fail\r\n&quot;' />
								</command>
								<command class_type='delay' title='Delay' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='5' type='2' />
								<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
									<argument exp='&quot;Reset\r\n&quot;' />
								</command>
								<command class_type='native' title='C Code' ccode='RESET();' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' language='C' />
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Main' description='' statediag='0' >
						<return name='Return' type='v0' description='' isconst='0' isHidden='0' isinit='0' usrinit='' setinit='' />
						<command class_type='native' title='Set Internal Osc' ccode='OSCCON = 0x70;' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' language='C' />
						<command class_type='comment' title='' comment='Initialise components and setup ESP8266

You will need to preset the following variables

SSID = The SSID your ESP will use
Password = password for the SSID

Once AP is created take note of Server IP displayed' textarea='39,10,39,10' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' />
						<command class_type='call' title='Initialise components' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' macro='Initialise' />
						<command class_type='call' title='ESP Setup' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' macro='ESP_Setup' />
						<command class_type='loop' title='Receive Loop' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' type='0' exp='1' >
							<flowline >
								<command class_type='comment' title='' comment='Loops looking for incoming data which is put
into the Circular Buffer.

We search for the presence of \r\n and if found
means we have received a complete transmission.

We then parse until the data is reached which is
then displayed and sent out on the UART

Note: Whilst connecting to remote, details of such will be
         displayed. These can be ignored or parsed out.' textarea='12,0,12,0' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' />
								<command class_type='call' title='Get Data Byte' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='WLAN_ESP8266' macro='GetByteWithTimeout' >
									<return exp='Data' />
								</command>
								<command class_type='decision' title='If Data isn&apos;t Null' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='Data &gt; 0' swap='0' >
									<flowline >
										<command class_type='call' title='Put Rx Data in CB' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='CircularBuffer1' macro='PutByte' >
											<argument exp='Data' />
										</command>
										<command class_type='call' title='Look for Data Termination (\r\n) in Buffer' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='CircularBuffer1' macro='LookForValue' >
											<return exp='Ret' />
											<argument exp='&quot;\r\n&quot;' />
											<argument exp='2' />
											<argument exp='0' />
											<argument exp='1' />
										</command>
										<command class_type='decision' title='If found' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='Ret = 1' swap='0' >
											<flowline >
												<command class_type='loop' title='Loop through CB until Data = \n' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' type='1' exp='Data = 0x0A' start='0' >
													<flowline >
														<command class_type='call' title='Component Macro' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='CircularBuffer1' macro='GetByte' >
															<return exp='Data' />
														</command>
														<command class_type='decision' title='If Data is a colon ( : )' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' exp='Data = 0x3A' swap='0' >
															<flowline >
																<command class_type='comment' title='' comment='At this point we have reached our data within the CB' textarea='12,0,12,0' cmdcolor='4206456' cmdcolor_sec='10785756' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' />
																<command class_type='loop' title='Loop through CB until Data = \n' cmdcolor='4767473' cmdcolor_sec='11337727' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' type='1' exp='Data = 0x0A' start='0' >
																	<flowline >
																		<command class_type='call' title='Component Macro' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='CircularBuffer1' macro='GetByte' >
																			<return exp='Data' />
																		</command>
																		<command class_type='call' title='Component Macro' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendChar' >
																			<argument exp='Data' />
																		</command>
																	</flowline>
																</command>
																<command class_type='call' title='Component Macro' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='CircularBuffer1' macro='FlushBuffer' />
															</flowline>
															<flowline />
														</command>
													</flowline>
												</command>
											</flowline>
											<flowline />
										</command>
									</flowline>
									<flowline />
								</command>
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Initialise' description='' statediag='0' >
						<return name='Return' type='v0' description='' isconst='0' isHidden='0' isinit='0' usrinit='' setinit='' />
						<command class_type='call' title='Initialise UART on Ch2' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='Initialise' />
						<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
							<argument exp='&quot;UART Test OK\r\n&quot;' />
						</command>
						<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
							<argument exp='&quot;Initialise ESP\r\n&quot;' />
						</command>
						<command class_type='call' title='Initialise ESP on Ch1' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='WLAN_ESP8266' macro='Initialise' />
						<command class_type='call' title='Send Test Message to PC' cmdcolor='4487093' cmdcolor_sec='11066367' cmdcolor_txt='16777215' cmdgradient='4' cmdopacity='0.64' component='UART1' macro='SendString' >
							<argument exp='&quot;ESP OK\r\n&quot;' />
						</command>
					</flowline>
				</macro>
			</macros>
			<component class_type='ref' guid='e1bb4679-58ef-40dc-8d09-306ada46f7bf' vmin='1' vmaj='2' codename='WLAN_ESP8266' panelId='0' x='280' y='-206' z='0' xsz='25' ysz='25' zsz='25' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' scadavisible='1' interactive='1' solid='1' layer='2' poslock='1' comp2dType='0' >
				<resources />
				<properties />
				<values >
					<value target='RxBufferSize' data='400' />
					<value target='ScanBufferSize' data='180' />
					<value target='ResetMode' data='000' />
					<value target='Termination' data='001' />
					<value target='cal_uart1::CHANNEL' data='001' />
					<value target='cal_uart1::BAUD_LIST' data='009' />
					<value target='cal_uart1::BAUD' data='115200' />
					<value target='cal_uart1::TX' data='$PORTC.6' />
					<value target='cal_uart1::OutputPins' data='000' />
					<value target='cal_uart1::TXAlt' data='0' />
					<value target='cal_uart1::RX' data='$PORTC.7' />
					<value target='cal_uart1::InputPins' data='085' />
					<value target='cal_uart1::RXAlt' data='0' />
					<value target='RESET' data='$PORTC.1' />
					<value target='cal_uart1::FLOWEN' data='000' />
					<value target='cal_uart1::RTS' data='$PORTC.4' />
					<value target='cal_uart1::CTS' data='$PORTC.5' />
					<value target='UARTidx' data='001' />
					<value target='PAGES' data='001' />
					<value target='TIMEOUT' data='4' />
					<value target='LineDelay' data='100' />
					<value target='name1' data='index.htm' />
					<value target='html1' data='&lt;html&gt;
Main Index Page
&lt;/html&gt;' />
					<value target='name2' data='page2.htm' />
					<value target='html2' data='&lt;html&gt;
Page 2
&lt;/html&gt;' />
					<value target='name3' data='page3.htm' />
					<value target='html3' data='&lt;html&gt;
Page 3
&lt;/html&gt;' />
					<value target='name4' data='page4.htm' />
					<value target='html4' data='&lt;html&gt;
Page 4
&lt;/html&gt;' />
					<value target='WLAN_USE_PAGE1' data='1' />
					<value target='WLAN_USE_PAGE2' data='0' />
					<value target='WLAN_USE_PAGE3' data='0' />
					<value target='WLAN_USE_PAGE4' data='0' />
					<value target='Outgoing_Count' data='001' />
					<value target='Out_Len_0' data='20' />
					<value target='Out_Len_1' data='20' />
					<value target='Out_Len_2' data='20' />
					<value target='Out_Len_3' data='20' />
					<value target='Out_Len_4' data='20' />
					<value target='Out_Len_5' data='20' />
					<value target='Out_Len_6' data='20' />
					<value target='Out_Len_7' data='20' />
					<value target='Out_Len_8' data='20' />
					<value target='Out_Len_9' data='20' />
					<value target='Out_Len_10' data='20' />
					<value target='Out_Len_11' data='20' />
					<value target='Incoming_Count' data='001' />
					<value target='In_Len_0' data='20' />
					<value target='In_Len_1' data='20' />
					<value target='In_Len_2' data='20' />
					<value target='In_Len_3' data='20' />
					<value target='In_Len_4' data='20' />
					<value target='In_Len_5' data='20' />
					<value target='label' data='WLAN ESP8266' />
					<value target='SimMethod' data='000' />
					<value target='cal_uart1::ScopeTraces' data='0' />
					<value target='cal_uart1::ConsoleData' data='0' />
					<value target='cal_uart1::ConsoleColumns' data='64' />
					<value target='cal_uart1::DataSource' data='000' />
					<value target='cal_uart1::com_port' data='001' />
					<value target='cal_uart1::Injector' data='000' />
					<value target='cal_uart::APIUseDDR' data='' />
					<value target='cal_uart::APIDDRPin' data='' />
					<value target='cal_uart::APIDDRRXState' data='' />
					<value target='cal_uart::APIUseFC' data='' />
					<value target='cal_uart::APICTSPin' data='' />
					<value target='cal_uart::APIRTSPin' data='' />
					<value target='MIAC' data='0' />
					<value target='RFPOWER' data='' />
					<value target='RemapIndex' data='20' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='ee697d50-7fb5-4074-8cd6-996e5c386722' vmin='0' vmaj='1' codename='LCD_BL0169' panelId='0' x='201' y='-83' z='0' xsz='25' ysz='25' zsz='25' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' scadavisible='1' interactive='1' solid='1' layer='2' poslock='0' comp2dType='0' >
				<resources />
				<properties />
				<values >
					<value target='LCD1::Pin_Data_0' data='$PORTB.0' />
					<value target='LCD1::Pin_Data_1' data='$PORTB.1' />
					<value target='LCD1::Pin_Data_2' data='$PORTB.2' />
					<value target='LCD1::Pin_Data_3' data='$PORTB.3' />
					<value target='LCD1::Pin_RS' data='$PORTB.4' />
					<value target='LCD1::Pin_E' data='$PORTB.5' />
					<value target='LCD1::ctrl_lcd::Base_GLCD1::ComponentLabel' data='001' />
					<value target='LCD1::ctrl_lcd::Base_GLCD1::GdiText1::sText' data='LCD_BL0169' />
					<value target='LCD1::ctrl_lcd::Base_GLCD1::GdiText1::dScale' data='1.000000' />
					<value target='LCD1::ctrl_lcd::TextColour' data='0' />
					<value target='LCD1::ctrl_lcd::TextBg' data='14803425' />
					<value target='LCD1::ctrl_lcd::DisplayBg' data='16777215' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='c34f9b8a-a915-4f75-ad0c-87f2ad670a8a' vmin='5' vmaj='1' codename='CircularBuffer1' panelId='0' x='72' y='-208' z='0' xsz='1' ysz='1' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' scadavisible='1' interactive='1' solid='1' layer='2' poslock='0' comp2dType='0' >
				<resources />
				<properties />
				<values >
					<value target='BufferSize' data='128' />
					<value target='StorageType' data='001' />
					<value target='MemType' data='000' />
					<value target='RETURN' data='000' />
					<value target='Console' data='1' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='c73616d1-7ad0-45d9-aada-69ccfa4c5efc' vmin='0' vmaj='3' codename='UART1' panelId='0' x='177' y='-309' z='0' xsz='25' ysz='25' zsz='25' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' scadavisible='1' interactive='1' solid='1' layer='2' poslock='1' comp2dType='0' >
				<resources />
				<properties />
				<values >
					<value target='cal_uart::CHANNEL' data='002' />
					<value target='cal_uart::BAUD_LIST' data='004' />
					<value target='cal_uart::BAUD' data='9600' />
					<value target='cal_uart::DBITS' data='008' />
					<value target='cal_uart::RETURN' data='000' />
					<value target='cal_uart::ECHO' data='000' />
					<value target='cal_uart::UseTX' data='1' />
					<value target='cal_uart::TX' data='$PORTD.6' />
					<value target='cal_uart::OutputPins' data='007' />
					<value target='cal_uart::TXAlt' data='0' />
					<value target='cal_uart::UseRX' data='1' />
					<value target='cal_uart::RX' data='$PORTD.7' />
					<value target='cal_uart::InputPins' data='013' />
					<value target='cal_uart::RXAlt' data='0' />
					<value target='cal_uart::FLOWEN' data='000' />
					<value target='cal_uart::RTS' data='$PORTB.2' />
					<value target='cal_uart::CTS' data='$PORTB.1' />
					<value target='label' data='UART' />
					<value target='cal_uart::ScopeTraces' data='0' />
					<value target='cal_uart::ConsoleData' data='1' />
					<value target='cal_uart::ConsoleFormat' data='000' />
					<value target='cal_uart::ConsoleColumns' data='64' />
					<value target='cal_uart::DataSource' data='000' />
					<value target='cal_uart::com_port' data='000' />
					<value target='cal_uart::Injector' data='000' />
					<value target='cal_uart::APIUseDDR' data='' />
					<value target='cal_uart::APIDDRPin' data='' />
					<value target='cal_uart::APIDDRRXState' data='' />
					<value target='cal_uart::APIUseFC' data='' />
					<value target='cal_uart::APICTSPin' data='' />
					<value target='cal_uart::APIRTSPin' data='' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
		</component>
	</components>
	<scadaresourcelookup />
	<keymap />
	<panel2d shadows='0' lighting='0' brightness='0' >
		<background rgb='9737364' img='' style='0' />
		<camera xe='0' ye='0' ze='936.006' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
		<viewport dx='552' dy='593' zoom='71.3586' fix_topleft='0' />
		<page x='1000' y='1000' show='0' rgb='7360576' />
		<winpos ID='7005' RectRecentFloat='706,130,1238,634' RectRecentDocked='343,55,895,648' RecentFrameAlignment='16384' RecentRowIndex='0' IsFloating='0' MRUWidth='32767' PinState='0' IsMaximized='0' IsVisible='0' />
	</panel2d>
	<panel3d shadows='0' lighting='2' brightness='0' perspective='1' >
		<background rgb='8409120' img='' style='0' />
		<table rgb='7360576' img='' style='0' size='0' />
		<camera xe='0' ye='0' ze='781.66' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
		<camerakey0 xe='0' ye='0' ze='300' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
		<camerakey1 xe='-3.67394e-14' ye='0' ze='-300' xt='0' yt='0' zt='0' xquat='0' yquat='1' zquat='0' wquat='6.12323e-17' />
		<camerakey2 xe='0' ye='-300' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-0.707107' yquat='0' zquat='0' wquat='0.707107' />
		<camerakey3 xe='-3.67394e-14' ye='300' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-4.32978e-17' yquat='0.707107' zquat='0.707107' wquat='4.32978e-17' />
		<camerakey4 xe='-300' ye='-6.66134e-14' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-0.5' yquat='0.5' zquat='0.5' wquat='0.5' />
		<camerakey5 xe='300' ye='-6.66134e-14' ze='6.66134e-14' xt='0' yt='0' zt='0' xquat='-0.5' yquat='-0.5' zquat='-0.5' wquat='0.5' />
		<camerakey6 xe='-173.205' ye='-173.205' ze='173.205' xt='0' yt='0' zt='0' xquat='-0.424708' yquat='0.17592' zquat='0.339851' wquat='0.820473' />
		<winpos ID='7004' RectRecentFloat='716,318,1366,768' RectRecentDocked='353,243,634,693' RecentFrameAlignment='16384' RecentRowIndex='0' IsFloating='0' MRUWidth='32767' PinState='0' IsMaximized='0' IsVisible='0' />
	</panel3d>
	<panels2d count='1' >
		<panel2d_0 id='0' name='2D Panel' >
			<winpos ID='1171' RectRecentFloat='887,204,1265,654' RectRecentDocked='524,129,894,548' RecentFrameAlignment='16384' RecentRowIndex='0' IsFloating='0' MRUWidth='32767' PinState='0' IsMaximized='0' IsVisible='0' />
			<background fill='288230376151053813' showgrid='1' gridstyle='1' gridsize='10' gridbrush='71776119075691740' snaptogrid='0' />
		</panel2d_0>
	</panels2d>
	<layout >
		<view type='0' name='Main' mode='0' placement='LAAAAAAAAAABAAAA---------------------wUAAAAYAAAATAQAAEwCAAA' zoom='100' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Initialise' mode='0' placement='LAAAAAAAAAABAAAA---------------------wUAAAAYAAAATAQAAEwCAAA' zoom='100' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='ESP_Setup' mode='0' placement='LAAAAAAAAAABAAAA---------------------wUAAAAYAAAATAQAAEwCAAA' zoom='100' scrollx='0' scrolly='609' flags='0' />
	</layout>
</document>
</root>
