@SET ComPort=%3
@SET BaudRate=%4

@REM -------------- AVRDUDE programmer --------------

@SET Fuse1=
@SET Fuse2=
@SET Fuse3=

@REM WSCRIPT.EXE %~dp0usermessage.vbs

@SET FilePath=%~dp5
@SET FileName=%~nx5
@PUSHD %FilePath%

@REM %6 is the flag to send fuse data instead of the program
@IF "%6"=="1" GOTO Config


:ProgFlash
@SET AVRDUDEcmd="%~dp0..\bin\avrdude.exe" -p%1 -P%ComPort% -b%BaudRate% -c%2 -D -Uflash:w:"%FileName%"
@SHIFT
@GOTO Send


:Config
@SET AVRDUDEcmd="%~dp0..\bin\avrdude.exe" -p%1 -P%ComPort% -b%BaudRate% -c%2 -u

@REM %7 is the number of fuses present
@IF "%7"=="1" GOTO ConfigOneFuse


:ConfigThreeFuses
@IF NOT "%8"=="-1" SET Fuse1=-U hfuse:w:%8:m
@IF NOT "%9"=="-1" SET Fuse2=-U lfuse:w:%9:m
@SHIFT
@IF NOT "%9"=="-1" SET Fuse3=-U efuse:w:%9:m
@GOTO Send


:ConfigOneFuse
@IF NOT "%8"=="-1" SET Fuse1=-U fuse:w:%8:m
@SHIFT
@GOTO Send


:Send
@REM Now add any additional command line parameters here
@SHIFT
@SHIFT
@SHIFT
@SHIFT
@SHIFT
@SHIFT
@SHIFT
@SHIFT
@SHIFT
@SHIFT

@REM mode %ComPort%: baud=%BaudRate% parity=n data=8 stop=1 to=on xon=off odsr=off octs=off dtr=hs rts=off idsr=off
@REM >mode %ComPort%: baud=%BaudRate% parity=n data=8 stop=1 to=on xon=off odsr=off octs=off dtr=on rts=off idsr=off

%AVRDUDEcmd% %Fuse1% %Fuse2% %Fuse3% %0 %1  %2  %3  %4  %5  %6  %7  %8  %9
@IF %ERRORLEVEL% NEQ 0 GOTO DUDEError
@GOTO End


:DUDEError
@ECHO.
@ECHO Error returned from [avrdude]
@EXIT %ERRORLEVEL%



:End
@ECHO.
@ECHO Programming successful!
@EXIT 0