Page 2 of 2
Re: Pickit 3 programing issues
Posted: Wed Mar 16, 2022 8:20 pm
by Chadb
Thanks for that! I'll give that a try after work.
Chad
Re: Pickit 3 programing issues
Posted: Wed Apr 27, 2022 4:07 pm
by Chadb
Hi Martin,
Sorry about the delay, got a big project and just got busy.
That worked. It still gives a memory error. but it does program and run after i set the config bits.
So was it a mismarked chip or is it something in FC?
Anyway, now back to the project.
Thanks,
Chad
Re: Pickit 3 programing issues
Posted: Thu Apr 28, 2022 8:22 am
by medelec35
Hi.
At least you are now able to program, which is the main thing.
No, it's not a Flowcode issue, it's down to Microchip as they would have printed and programmed the device ID
Re: Pickit 3 programing issues
Posted: Thu Apr 28, 2022 11:20 pm
by Chadb
After a little time with it, the file you made has some problem with one of the ports on the chip. Maybe FC can do a fix and get it up to snuff.
But at least now I can talk to it.
Thanks again!
Chad
p.s. how many times do I need to post before they don't need to be manually verified?
Re: Pickit 3 programing issues
Posted: Fri Apr 29, 2022 9:20 am
by medelec35
Hi.
You're welcome.
What port are you having an issue with?
Your posts should no longer require verification.
If they do, then I will send an email to a colleague to get it sorted for you.
Re: Pickit 3 programing issues
Posted: Fri Apr 29, 2022 9:20 am
by Steve-Matrix
Chadb wrote: ↑Thu Apr 28, 2022 11:20 pm
p.s. how many times do I need to post before they don't need to be manually verified?
Hopefully I've sorted this for you now. Normally, a new user is allowed to post without requiring moderator approval after 3 posts (I think). This should be automatic but for some reason it didn't happen to your account.
Re: Pickit 3 programing issues
Posted: Thu Jun 09, 2022 2:38 pm
by Chadb
Hi martin, I was testing with a led strip and for some reason it wouldn't let me pick pin 1. I had to move it to pin 11 I think. I have been super busy and haven't played with it lately. I have some time and will be getting back into it. Usually what happens is I get inspired to do something then I run into a problem like this and by the time I get it going I lost the motivation that got me gong in the first place.
Add to that fact that I had to reinstall everything after a , dragged kicking and screaming to update my machine from win 7 to 10. Then i couldn't get my pickit 4 to work and had to dig for my pickit3...
I also am not getting email reminders that there is a new response from here. I have been through my settings and it has my email but can't find a switch to get emails on new posts. Being in the states there is usually a day lag in responses...
Anyway I am going to get back to it here for a bit so I will probably have some more questions.
Thanks for your help.
Steve: I'll let you know if I still have the post auth thing.
Chad
edit* post went through
edit** I just opened the project again and this time it let me pick the original pin I was using.?