ESP32 Internal CAN Bus Support

For general Flowcode discussion that does not belong in the other sections.
Post Reply
unity-control
Posts: 52
http://meble-kuchenne.info.pl
Joined: Wed Sep 08, 2021 10:36 pm
Has thanked: 26 times
Been thanked: 11 times

ESP32 Internal CAN Bus Support

Post by unity-control »

Hi everyone,

Does FC support Internal Can BUS on ESP32? The FC component shows... but does it work?

Cheers,
R

BenR
Matrix Staff
Posts: 1706
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 435 times
Been thanked: 598 times

Re: ESP32 Internal CAN Bus Support

Post by BenR »

Hello,

Yes it should be working, I'm not sure if it's been tested but there is certainly code there to drive the internal CAN peripheral.

unity-control
Posts: 52
Joined: Wed Sep 08, 2021 10:36 pm
Has thanked: 26 times
Been thanked: 11 times

Re: ESP32 Internal CAN Bus Support

Post by unity-control »

Many thanks Ben for this,

Will give a try to see if the interface works at all... Do you think RX CAN Interrupt can be implemented in Flowcode?

Thanks,
R

Post Reply