Flowcode Support Board
https://flowcode.co.uk/forums/
PIC32MX795F512L interrupts
https://flowcode.co.uk/forums/viewtopic.php?f=5&t=1021
Page
1
of
1
PIC32MX795F512L interrupts
Posted:
Fri Jan 14, 2022 12:10 pm
by
KK_Electronics_Ltd
When selecting INT1 as an interrupt source on the MX795F512L, it is shown as INT1/RD8 - whereas the data sheet shows that this is RE8 (pin 18 on the 100-pin TQFP).