Page 1 of 1
LCD_SSD1351 FC8 FC9 not compatible
Posted: Thu Dec 10, 2020 9:56 am
by stefan.erni
Hi Ben
LCD_SSD1351 is working FC8
But FC9 not compatible with F8, how the text is on the display. Some text is turned 90 deegres and fonts are different
And the propertis looks new in FC9
Do you have some infos?
regards
Stefan
- FC9_display_2020-12-10_10-41-49.png (95.46 KiB) Viewed 4268 times
- FC8_display_2020-12-10_10-45-16.png (40.73 KiB) Viewed 4268 times
Re: LCD_SSD1351 FC8 FC9 not compatible
Posted: Thu Dec 10, 2020 12:26 pm
by BenR
Hello,
Can you please post your program and I will have a look for you.
Regarding the v9 gLCD fonts this post might help.
viewtopic.php?p=81#p81
Re: LCD_SSD1351 FC8 FC9 not compatible
Posted: Thu Dec 10, 2020 2:28 pm
by stefan.erni
Hi Ben
In the simulation the Text and the line turning around. In the hardware is just the line is turning, the text is always in the same direction.
regards
Stefan
Re: LCD_SSD1351 FC8 FC9 not compatible
Posted: Thu Dec 10, 2020 2:59 pm
by BenR
Hi Stefan,
Great really appreciate that and thanks for letting me know, hopefully solved for you now.
Re: LCD_SSD1351 FC8 FC9 not compatible
Posted: Thu Dec 10, 2020 4:32 pm
by stefan.erni
Hi Ben
Thanks a lot. It's working now in all the directions.
But there is a little problem when I set the display orientation to 3, the clear display command is not working anymore.(in all the another orientation the clear display command is working)
unfortunately I use the display in orientation 3
regards
Stefan
Re: LCD_SSD1351 FC8 FC9 not compatible
Posted: Fri Dec 11, 2020 12:33 pm
by BenR
Thanks Stefan,
Should be sorted for you now.
Re: LCD_SSD1351 FC8 FC9 not compatible
Posted: Fri Dec 11, 2020 4:05 pm
by stefan.erni
Hi Ben
Perfect ! And the new font's looks good.
regards
Stefan