quadrature rotary encoder

Any bugs you encounter with Flowcode should be discussed here.
Post Reply
Sundwell
Posts: 2
http://meble-kuchenne.info.pl
Joined: Mon Dec 14, 2020 7:12 pm

quadrature rotary encoder

Post by Sundwell »

Hi Flowcode staff.

In Flowcode 9 the quadrature rotary encoder component is in the wrong component list.
It is located in Mechatronics, but should be located in Basic I / O

Regards
Henrik

BenR
Matrix Staff
Posts: 1707
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 435 times
Been thanked: 598 times

Re: quadrature rotary encoder

Post by BenR »

Hello Henrik,

Please be aware that the licensing of component packs doesn't nessisarily correspond with the listing in the component toolbar. We do this where possible but in some cases it's simpler not to.

Sundwell
Posts: 2
Joined: Mon Dec 14, 2020 7:12 pm

Re: quadrature rotary encoder

Post by Sundwell »

The problem is that I now no longer have the license for the encoder component.
If I go to your website to buy it, it is below the basic I / O that I have bought.
best regards Henrik

zoli2496
Posts: 28
Joined: Wed Sep 22, 2021 7:23 am
Been thanked: 2 times

Re: quadrature rotary encoder

Post by zoli2496 »

I bought the Basic IO module, I can't use the Quadrature Encoder in it. And he's on the list. Why can't I use it? Why is "QuadEnc" listed on the Basic IO website?

I'm looking for a solution, thank you.
Attachments
enc_2.png
enc_2.png (173.72 KiB) Viewed 1919 times
enc_1.png
enc_1.png (274.26 KiB) Viewed 1919 times

medelec35
Matrix Staff
Posts: 1432
Joined: Wed Dec 02, 2020 11:07 pm
Has thanked: 506 times
Been thanked: 469 times

Re: quadrature rotary encoder

Post by medelec35 »

Hi zoli2496.
Thank you for the spot.
The basic IO showing quadrature encoder is a mistake.
The first image showing quadrature encoder within Mechatronics is correct.
All the components within the first image will be correct as it is now auto-generated.
This issue will be looked into and corrected.
Martin

Post Reply