Re: New MCP690X Thermocouple Component.
Posted: Mon May 27, 2024 12:46 pm
Hi Martin, Hi Jorgen
On my program I use few MCP9600 and few LSM9DS1.
it actually works nicely, but there is still a small problem.
If i set the clock from LSM9DS1 to 400khz , the MCP9600 sets the clock to the wrong value, even also to 400khz, and it then the MCP9600 is not longer working.
Clock from MCP9600 is with 400khz to high!:
If i set LSM9DS1 to 100khz clock, the MCP9600 sets the clock to the to 100khz, and it then it's works nice.
Clock from MCP9600 is ok 100Khz:
I also have tested the MCP9600 in software mode but then the clock is with 7.1429kHz very slow
Here my program:
On my program I use few MCP9600 and few LSM9DS1.
it actually works nicely, but there is still a small problem.
If i set the clock from LSM9DS1 to 400khz , the MCP9600 sets the clock to the wrong value, even also to 400khz, and it then the MCP9600 is not longer working.
Clock from MCP9600 is with 400khz to high!:
- scope_4.png (37.94 KiB) Viewed 1894 times
Clock from MCP9600 is ok 100Khz:
- scope_5.png (37.22 KiB) Viewed 1894 times
- scope_6.png (35.19 KiB) Viewed 1894 times