Page 1 of 2
Imbedded Internet Course
Posted: Sun Jan 16, 2022 5:04 pm
by steve001
Afternoon All,
Downloaded this module and started to read through the content. It talked of a CD with all the examples on it. Can this be downloaded anywhere ?
Regards
Steve
Re: Imbedded Internet Course
Posted: Sun Jan 16, 2022 5:10 pm
by chipfryer27
Hi
No link or attachment <s>
Regards
Re: Imbedded Internet Course
Posted: Mon Jan 17, 2022 12:45 pm
by steve001
That's what i am asking .. Can the example files be downloaded ?
The course content describes a supplied CD
Steve
Re: Imbedded Internet Course
Posted: Mon Jan 17, 2022 1:46 pm
by Steve-Matrix
steve001 wrote: ↑Sun Jan 16, 2022 5:04 pm
Downloaded this module and started to read through the content
Hi Steve - which module are you referring to? Do you mean the Embedded Internet course on this page?
https://www.flowcode.co.uk/education/
I have asked my colleagues if these are available and will let you know...
Re: Imbedded Internet Course
Posted: Mon Jan 17, 2022 4:54 pm
by Steve-Matrix
The Embedded Internet course files can be found here:
https://www.matrixtsl.com/eblocks/resources/
Re: Imbedded Internet Course
Posted: Mon Jan 17, 2022 6:04 pm
by steve001
Hi Steve
Yes thats the one, thank you
Steve
Re: Imbedded Internet Course
Posted: Sat Jan 29, 2022 7:51 am
by steve001
Morning All,
I am Looking at using a couple of ECIO 40p's / 28p's & ENC28J60 breakout boards to experiment and do the examples with.
Am i likely to experience any issues / run into problems with these ?
https://hobbycomponents.com/wired-wirel ... ork-module
Steve
Re: Imbedded Internet Course
Posted: Sat Jan 29, 2022 10:52 am
by LeighM
Hi Steve,
The Matrix Embedded Internet course and examples use the W5500 (WIZ Click board) so you will likely find it easier if you use the same.
The ENC28J60 is cheaper, but needs more software to drive it.
Hope that helps
Leigh
Re: Imbedded Internet Course
Posted: Sat Jan 29, 2022 4:39 pm
by steve001
Thanks Leigh, will the ECIO's be ok also ?
Steve
Re: Imbedded Internet Course
Posted: Sat Jan 29, 2022 5:18 pm
by LeighM
Yes, should be.
The W5500 modules connect to the processor via SPI.