Flowcode Support Board

I've attached a sample program which I think is a bug. Using 2 thermistor components it dosn't separate the 2 devices. Thermistor 1 seems to be the only one which change the temp output and does it for both

Thanks for the sample program - it shows the problem succinctly and should help us resolve the issue.

Thanks Steve. Little more info - when you add the second thermistor it 'connects' it to the same analogue input (AN13)

Hello.
Many thanks for the spot.
I have fixed the issue and an update will be pushed on the update system, hopefully, today.
I will let you know when the update is pushed.

The updates have now been pushed.
After updating the component database, you will need to reload your project for the effects to take place.

Is your project working for you now?

Sorry Martin it seems to work but then it alternates between one reading then the other

I saw that too, but then noticed they were both connected to the same analogue input. Try setting them to different analogue inputs and it should work for you.

Yes. Thats odd as I had separated them to AN14 and 13. I mentioned that in the post above. However, yes its now working on the smaller program

However, you cant change the range displayed on the 2d panel it remains as the default of -25 and 125. I want to change this and the various resistance readings to match a 100k thermistor i have but the panel icon still remains as -25 and 125. The label doesn't change either