//************************************************************************************ //** //** File name: \\NASHJJAKL\Jordy Kleian\Documenten\Flowcode Projects\Projecten\Power Supply Rev.2\uC Display\Display.c //** Title: //** Description: //** //** Generated by: Flowcode v5.5.2.1 //** Date: Saturday, June 08, 2013 16:54:31 //** Licence: Professional //** Registered to: Jordy Kleian //** Licence key: H8NNFC //** //** //** http://www.matrixmultimedia.com //** //************************************************************************************ #define MX_PIC #define MX_USES_UINT8 1 #define MX_USES_SINT16 1 #define MX_USES_CHAR 2 #define MX_USES_FLOAT 1 #define MX_USES_SINT32 0 #define MX_USES_BOOL 1 #define MX_USES_UINT16 1 #define MX_USES_UINT32 0 //Defines voor de microcontroller #define P18F6722 #define FC_CAL_PIC #define MX_ADC #define MX_ADC_TYPE_12 #define MX_ADC_BITS_10 #define MX_EE #define MX_EE_TYPE3 #define MX_EE_SIZE 1024 #define MX_SPI_1 #define MX_SPI_1_MISO_PORT portc #define MX_SPI_1_MISO_TRIS trisc #define MX_SPI_1_MISO_PIN 4 #define MX_SPI_1_MOSI_PORT portc #define MX_SPI_1_MOSI_TRIS trisc #define MX_SPI_1_MOSI_PIN 5 #define MX_SPI_1_CLK_PORT portc #define MX_SPI_1_CLK_TRIS trisc #define MX_SPI_1_CLK_PIN 3 #define MX_SPI_1_SS_PORT portf #define MX_SPI_1_SS_TRIS trisf #define MX_SPI_1_SS_PIN 7 #define MX_SPI_2 #define MX_SPI_2_MISO_PORT portd #define MX_SPI_2_MISO_TRIS trisd #define MX_SPI_2_MISO_PIN 5 #define MX_SPI_2_MOSI_PORT portd #define MX_SPI_2_MOSI_TRIS trisd #define MX_SPI_2_MOSI_PIN 4 #define MX_SPI_2_CLK_PORT portd #define MX_SPI_2_CLK_TRIS trisd #define MX_SPI_2_CLK_PIN 6 #define MX_SPI_2_SS_PORT portd #define MX_SPI_2_SS_TRIS trisd #define MX_SPI_2_SS_PIN 7 #define MX_UART_1 #define MX_UART_1_TX_PORT portc #define MX_UART_1_TX_TRIS trisc #define MX_UART_1_TX_PIN 6 #define MX_UART_1_RX_PORT portc #define MX_UART_1_RX_TRIS trisc #define MX_UART_1_RX_PIN 7 #define MX_UART_2 #define MX_UART_2_TX_PORT portg #define MX_UART_2_TX_TRIS trisg #define MX_UART_2_TX_PIN 1 #define MX_UART_2_RX_PORT portg #define MX_UART_2_RX_TRIS trisg #define MX_UART_2_RX_PIN 2 #define MX_I2C #define MX_MI2C #define MX_I2C_1 #define MX_I2C_1_SDA_PORT portc #define MX_I2C_1_SDA_TRIS trisc #define MX_I2C_1_SDA_PIN 4 #define MX_I2C_1_SCL_PORT portc #define MX_I2C_1_SCL_TRIS trisc #define MX_I2C_1_SCL_PIN 3 #define MX_I2C_2 #define MX_I2C_2_SDA_PORT portd #define MX_I2C_2_SDA_TRIS trisd #define MX_I2C_2_SDA_PIN 5 #define MX_I2C_2_SCL_PORT portd #define MX_I2C_2_SCL_TRIS trisd #define MX_I2C_2_SCL_PIN 6 #define MX_PWM #define MX_PWM_CNT 5 #define MX_PWM_PSCA1 #define MX_PWM_PSCA4 #define MX_PWM_PSCA16 #define MX_PWM_1_PORT portc #define MX_PWM_1_TRIS trisc #define MX_PWM_1_PIN 2 #define MX_PWM_2_PORT portc #define MX_PWM_2_TRIS trisc #define MX_PWM_2_PIN 1 #define MX_PWM_2_PORT_A porte #define MX_PWM_2_TRIS_A trise #define MX_PWM_2_PIN_A 7 #define MX_PWM_3_PORT portg #define MX_PWM_3_TRIS trisg #define MX_PWM_3_PIN 0 #define MX_PWM_4_PORT portg #define MX_PWM_4_TRIS trisg #define MX_PWM_4_PIN 3 #define MX_PWM_5_PORT portg #define MX_PWM_5_TRIS trisg #define MX_PWM_5_PIN 4 //Functies #define MX_CLK_SPEED 20000000 #ifdef _BOOSTC #include #endif #ifdef HI_TECH_C #include #endif //Configuratiegegevens #ifdef _BOOSTC #pragma DATA 0x300000, 0xff #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300001, 0x2 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300002, 0x19 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300003, 0x1e #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300004, 0x3 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300005, 0x81 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300006, 0xa0 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300007, 0xff #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300008, 0xff #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x300009, 0xc0 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x30000a, 0xff #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x30000b, 0xe0 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x30000c, 0xff #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif #ifdef _BOOSTC #pragma DATA 0x30000d, 0x40 #endif #ifdef _HI_TECH_C %C__CONFIG(%A, %V); #endif //Interne functies #include "C:\Program Files (x86)\Flowcode\v5\FCD\internals.c" //Macro functie declaraties void FCM_DrawHomescreen1(); void FCM_DATA_RS232(); void FCM_Check_RS232(); void FCM_VoltageReg_5VEN(); void FCM_BUS_Voltage(); void FCM_VREG_5V(); void FCM_CURRENT_5V(); void FCM_VREG_33V(); void FCM_VREG_MENU(); //Variable declaraties #define FCSZ_VREG_SET_VOLT 20 #define FCSZ_VREG_SET_CURR 20 #define FCSZ_VREG_SET_TOT 20 #define FCSZ_VREG_SET 20 #define FCSZ_VREG_SET_UNIT 20 #define FCSZ_RS232_DATA_RX_STR 20 #define FCSZ_VREG_SET_TENS 20 #define FCSZ_BUS_VOLT_STR 4 #define FCSZ_VARVREG_SET 20 #define FCV_DISABLE (1) #define FCV_ENABLE (0) #define FCV_TRUE (1) #define FCV_FALSE (0) MX_UINT8 FCV_CURR_DISP; MX_CHAR FCV_VREG_SET_VOLT[FCSZ_VREG_SET_VOLT]; MX_CHAR FCV_VREG_SET_CURR[FCSZ_VREG_SET_CURR]; MX_FLOAT FCV_COMP_STRINF; MX_CHAR FCV_VREG_SET_TOT[FCSZ_VREG_SET_TOT]; MX_CHAR FCV_VREG_SET[FCSZ_VREG_SET]; MX_CHAR FCV_VREG_SET_UNIT[FCSZ_VREG_SET_UNIT]; MX_UINT16 FCV_RS232_DATA_RX; MX_CHAR FCV_RS232_DATA_RX_STR[FCSZ_RS232_DATA_RX_STR]; MX_FLOAT FCV_BUS_VOLT_FLT; MX_UINT8 FCV_VOLT_DISP; MX_CHAR FCV_VREG_SET_TENS[FCSZ_VREG_SET_TENS]; MX_UINT8 FCV_VOLTAGEREG_5V; MX_CHAR FCV_BUS_VOLT_STR[FCSZ_BUS_VOLT_STR]; MX_UINT8 FCV_VOLTAGEREG_33V; MX_UINT8 FCV_VOLTAGEREG_5VEN; MX_SINT16 FCV_ADC_BUSVOLT; MX_UINT16 FCV_RS232_DATA_RX_OLD; MX_CHAR FCV_VARVREG_SET[FCSZ_VARVREG_SET]; //Custom(0): //Defines: //Error Reading Code For 128x64 gLCD Flowcode Component::DefinesCode //Custom(0): //Macro functie declaraties void FCD_Custom0_GetDefines(); void FCD_Custom0_LCD_Init(); void FCD_Custom0_LCD_Clear(); void FCD_Custom0_LCD_PlotPixel(char x, char y, char colour); void FCD_Custom0_LCD_Draw_Line(char x, char y, char x2, char y2, char colour); void FCD_Custom0_LCD_Draw_Rect(char x, char y, char width, char height, char colour); void FCD_Custom0_LCD_Print_String(char* String, MX_UINT8 MSZ_String, char X, char Y, char Font, char Transparent, char Colour); void FCD_Custom0_LCD_Print_Number(short Number, char X, char Y, char Font, char Transparent, char Colour); void FCD_Custom0_LCD_Invert_Rect(char x, char y, char width, char height); //RS232(0): //Defines: /**** Macro Substitutions **** a = Unique Reference b = Uart Channel (0-software / 1-4 hardware) c = tx pin d = tx port e = rx pin f = rx port g = flow control (0-Off / 1-On) h = cts pin i = cts port j = rts pin k = rts port l = baud rate m = data bits (7/8/9) (7 only supported in software modes) n = return type (0-byte / 1-MX_UINT16) o = echo enable (0-Off / 1-On) ******************************/ //Definitions for RS232 UART slot allocation #ifndef MX_UART_REF1 #define MX_UART_REF1 #define RS232_2_MX_UART_UREF 1 #define MX_UART_CHANNEL_1 1 #define MX_UART_TX_PIN_1 0 #define MX_UART_TX_PORT_1 porta #define MX_UART_TX_TRIS_1 trisa #define MX_UART_RX_PIN_1 0 #define MX_UART_RX_PORT_1 porta #define MX_UART_RX_TRIS_1 trisa #define MX_UART_FLOWEN_1 0 #define MX_UART_CTS_PIN_1 4 #define MX_UART_CTS_PORT_1 portc #define MX_UART_CTS_TRIS_1 trisc #define MX_UART_RTS_PIN_1 0 #define MX_UART_RTS_PORT_1 portc #define MX_UART_RTS_TRIS_1 trisc #define MX_UART_BAUD_1 19200 #define MX_UART_DBITS_1 9 #define MX_UART_RETURN_1 1 #define MX_UART_ECHO_1 0 #define MX_UART_INT_1 0 #else #ifndef MX_UART_REF2 #define MX_UART_REF2 #define RS232_2_MX_UART_UREF 2 #define MX_UART_CHANNEL_2 1 #define MX_UART_TX_PIN_2 0 #define MX_UART_TX_PORT_2 porta #define MX_UART_TX_TRIS_2 trisa #define MX_UART_RX_PIN_2 0 #define MX_UART_RX_PORT_2 porta #define MX_UART_RX_TRIS_2 trisa #define MX_UART_FLOWEN_2 0 #define MX_UART_CTS_PIN_2 4 #define MX_UART_CTS_PORT_2 portc #define MX_UART_CTS_TRIS_2 trisc #define MX_UART_RTS_PIN_2 0 #define MX_UART_RTS_PORT_2 portc #define MX_UART_RTS_TRIS_2 trisc #define MX_UART_BAUD_2 19200 #define MX_UART_DBITS_2 9 #define MX_UART_RETURN_2 1 #define MX_UART_ECHO_2 0 #define MX_UART_INT_2 0 #else #ifndef MX_UART_REF3 #define MX_UART_REF3 #define RS232_2_MX_UART_UREF 3 #define MX_UART_CHANNEL_3 1 #define MX_UART_TX_PIN_3 0 #define MX_UART_TX_PORT_3 porta #define MX_UART_TX_TRIS_3 trisa #define MX_UART_RX_PIN_3 0 #define MX_UART_RX_PORT_3 porta #define MX_UART_RX_TRIS_3 trisa #define MX_UART_FLOWEN_3 0 #define MX_UART_CTS_PIN_3 4 #define MX_UART_CTS_PORT_3 portc #define MX_UART_CTS_TRIS_3 trisc #define MX_UART_RTS_PIN_3 0 #define MX_UART_RTS_PORT_3 portc #define MX_UART_RTS_TRIS_3 trisc #define MX_UART_BAUD_3 19200 #define MX_UART_DBITS_3 9 #define MX_UART_RETURN_3 1 #define MX_UART_ECHO_3 0 #define MX_UART_INT_3 0 #else #ifndef MX_UART_REF4 #define MX_UART_REF4 #define RS232_2_MX_UART_UREF 4 #define MX_UART_CHANNEL_4 1 #define MX_UART_TX_PIN_4 0 #define MX_UART_TX_PORT_4 porta #define MX_UART_TX_TRIS_4 trisa #define MX_UART_RX_PIN_4 0 #define MX_UART_RX_PORT_4 porta #define MX_UART_RX_TRIS_4 trisa #define MX_UART_FLOWEN_4 0 #define MX_UART_CTS_PIN_4 4 #define MX_UART_CTS_PORT_4 portc #define MX_UART_CTS_TRIS_4 trisc #define MX_UART_RTS_PIN_4 0 #define MX_UART_RTS_PORT_4 portc #define MX_UART_RTS_TRIS_4 trisc #define MX_UART_BAUD_4 19200 #define MX_UART_DBITS_4 9 #define MX_UART_RETURN_4 1 #define MX_UART_ECHO_4 0 #define MX_UART_INT_4 0 #endif #endif #endif #endif #define RS232_2_UART_Init CAL_APPEND(FC_CAL_UART_Init_, RS232_2_MX_UART_UREF) #define RS232_2_UART_Send CAL_APPEND(FC_CAL_UART_Send_, RS232_2_MX_UART_UREF) #define RS232_2_UART_Receive CAL_APPEND(FC_CAL_UART_Receive_, RS232_2_MX_UART_UREF) #define RS232_2_UART_Update_Baud CAL_APPEND(FC_CAL_UART_Update_Baud_, RS232_2_MX_UART_UREF) extern void RS232_2_UART_Init(); extern void RS232_2_UART_Send(MX_UINT16 nChar); extern MX_SINT16 RS232_2_UART_Receive(MX_UINT8 nTimeout); extern void RS232_2_UART_Update_Baud(MX_UINT8 newbaud); //RS232(0): //Macro functie declaraties void FCD_RS2320_SendRS232Char(MX_SINT16 nChar); void FCD_RS2320_SendRS232String(MX_STRING String, MX_UINT8 MSZ_String); MX_SINT16 FCD_RS2320_ReceiveRS232Char(MX_UINT8 nTimeout); void FCD_RS2320_ReceiveRS232String(MX_CHAR* FCR_RETVAL, MX_UINT8 FCR_RETVAL_SIZE, MX_UINT8 nTimeout, MX_UINT8 NumBytes); void FCD_RS2320_ChangeHWBaud(MX_UINT8 newbaud); //ADC(0): //Defines: /**** Macro Substitutions **** a = Unique Reference b = Which ADC Channel c = Acquisition time d = Conversion Speed e = VRef+ Option f = VRef Voltage x 0.01V ******************************/ //Common Defines #define ADC_3_MX_ADC_CHANNEL 4 #define ADC_3_MX_ADC_ACTIME 40 #define ADC_3_MX_ADC_CONVSP 3 #define ADC_3_MX_ADC_VREFOP 0 #define ADC_3_MX_ADC_VREFVOL 500 #ifndef MX_ADC_CHANNEL_4 #define MX_ADC_CHANNEL_4 //Inform CAL ADC channel 4 is now in use. #endif #ifndef MX_ADC_REF //Inform CAL ADC peripheral is now in use #define MX_ADC_REF #endif extern void FC_CAL_Enable_ADC (MX_UINT8 Channel, MX_UINT8 Conv_Speed, MX_UINT8 Vref, MX_UINT8 T_Charge); extern MX_UINT16 FC_CAL_Sample_ADC (MX_UINT8 Sample_Mode); extern void FC_CAL_Disable_ADC (void); //ADC(0): //Macro functie declaraties void FCD_ADC0_SampleADC(); MX_UINT8 FCD_ADC0_ReadAsByte(); MX_UINT16 FCD_ADC0_ReadAsInt(); MX_FLOAT FCD_ADC0_ReadAsVoltage(); void FCD_ADC0_ReadAsString(MX_CHAR* FCR_RETVAL, MX_UINT8 FCR_RETVAL_SIZE); void FCD_ADC0_ADC_RAW_Configure_Channel(); MX_UINT8 FCD_ADC0_ADC_RAW_Sample_Channel_Byte(); MX_UINT16 FCD_ADC0_ADC_RAW_Sample_Channel_Int(); MX_UINT8 FCD_ADC0_ADC_RAW_Average_Channel_Byte(MX_UINT8 NumSamples, MX_UINT8 DelayUs); MX_UINT16 FCD_ADC0_ADC_RAW_Average_Channel_Int(MX_UINT8 NumSamples, MX_UINT8 DelayUs); void FCD_ADC0_ADC_RAW_Disable_Channel(); //Custom2(0): //Defines: //Error Reading Code For 128x64 gLCD Flowcode Component::DefinesCode //Custom2(0): //Macro functie declaraties void FCD_Custom20_GetDefines(); void FCD_Custom20_LCD_Init(); void FCD_Custom20_LCD_Clear(); void FCD_Custom20_LCD_PlotPixel(char x, char y, char colour); void FCD_Custom20_LCD_Draw_Line(char x, char y, char x2, char y2, char colour); void FCD_Custom20_LCD_Draw_Rect(char x, char y, char width, char height, char colour); void FCD_Custom20_LCD_Print_String(char* String, MX_UINT8 MSZ_String, char X, char Y, char Font, char Transparent, char Colour); void FCD_Custom20_LCD_Print_Number(short Number, char X, char Y, char Font, char Transparent, char Colour); void FCD_Custom20_LCD_Invert_Rect(char x, char y, char width, char height); //Custom(0): //Macro implementaties void FCD_Custom0_GetDefines() { } //Dummy end of function to allow defines to be added correctly #include //Common defines #define MX_DATA_PORT portf // #define MX_DATA_TRIS trisf // #define MX_CONTROL_PORT porta // #define MX_CONTROL_TRIS trisa // #define MX_CS1 3 // #define MX_CS2 4 // #define MX_DAT_INST 0 // #define MX_ENABLE 2 // #define MX_READ_WRITE 1 // //Static defines #define MX_CHIP1 0x00 #define MX_CHIP2 0x01 #define MX_LCD_ON 0x3F #define MX_LCD_OFF 0x3E #define MX_LCD_SET_ADD 0x40 #define MX_LCD_SET_PAGE 0xB8 #define MX_LCD_DISP_START 0xC0 #define MX_BLACK 0xFF #define MX_WHITE 0x00 //ASCII Pixel data rom char* ASCII1 = {0x00 , 0x00 , 0x00 , 0x00 , 0x00, // space // 32 - 43 0x00 , 0x06 , 0x5F , 0x06 , 0x00, // ! 0x07 , 0x03 , 0x00 , 0x07 , 0x03, // '' 0x24 , 0x7E , 0x24 , 0x7E , 0x24, // # 0x24 , 0x2B , 0x6A , 0x12 , 0x00, // $ 0x63 , 0x13 , 0x08 , 0x64 , 0x63, // % 0x36 , 0x49 , 0x56 , 0x20 , 0x50, // & 0x00 , 0x07 , 0x03 , 0x00 , 0x00, // ' 0x00 , 0x3E , 0x41 , 0x00 , 0x00, // ( 0x00 , 0x41 , 0x3E , 0x00 , 0x00, // ) 0x08 , 0x3E , 0x1C , 0x3E , 0x08, // * 0x08 , 0x08 , 0x3E , 0x08 , 0x08}; // + rom char* ASCII2 = {0x00 , 0xE0 , 0x60 , 0x00 , 0x00, // , // 44 - 55 0x08 , 0x08 , 0x08 , 0x08 , 0x08, // - 0x00 , 0x60 , 0x60 , 0x00 , 0x00, // . 0x20 , 0x10 , 0x08 , 0x04 , 0x02, // / 0x3E , 0x51 , 0x49 , 0x45 , 0x3E, // 0 0x00 , 0x42 , 0x7F , 0x40 , 0x00, // 1 0x62 , 0x51 , 0x49 , 0x49 , 0x46, // 2 0x22 , 0x49 , 0x49 , 0x49 , 0x36, // 3 0x18 , 0x14 , 0x12 , 0x7F , 0x10, // 4 0x2F , 0x49 , 0x49 , 0x49 , 0x31, // 5 0x3C , 0x4A , 0x49 , 0x49 , 0x30, // 6 0x01 , 0x71 , 0x09 , 0x05 , 0x03}; // 7 rom char* ASCII3 = {0x36 , 0x49 , 0x49 , 0x49 , 0x36, // 8 // 56 - 67 0x06 , 0x49 , 0x49 , 0x29 , 0x1E, // 9 0x00 , 0x6C , 0x6C , 0x00 , 0x00, // : 0x00 , 0xEC , 0x6C , 0x00 , 0x00, // ; 0x08 , 0x14 , 0x22 , 0x41 , 0x00, // < 0x24 , 0x24 , 0x24 , 0x24 , 0x24, // = 0x00 , 0x41 , 0x22 , 0x14 , 0x08, // > 0x02 , 0x01 , 0x59 , 0x09 , 0x06, // ? 0x3E , 0x41 , 0x5D , 0x55 , 0x1E, // @ 0x7E , 0x09 , 0x09 , 0x09 , 0x7E, // A 0x7F , 0x49 , 0x49 , 0x49 , 0x36, // B 0x3E , 0x41 , 0x41 , 0x41 , 0x22}; // C rom char* ASCII4 = {0x7F , 0x41 , 0x41 , 0x41 , 0x3E, // D // 68 - 79 0x7F , 0x49 , 0x49 , 0x49 , 0x41, // E 0x7F , 0x09 , 0x09 , 0x09 , 0x01, // F 0x3E , 0x41 , 0x49 , 0x49 , 0x7A, // G 0x7F , 0x08 , 0x08 , 0x08 , 0x7F, // H 0x00 , 0x41 , 0x7F , 0x41 , 0x00, // I 0x30 , 0x40 , 0x40 , 0x40 , 0x3F, // J 0x7F , 0x08 , 0x14 , 0x22 , 0x41, // K 0x7F , 0x40 , 0x40 , 0x40 , 0x40, // L 0x7F , 0x02 , 0x04 , 0x02 , 0x7F, // M 0x7F , 0x02 , 0x04 , 0x08 , 0x7F, // N 0x3E , 0x41 , 0x41 , 0x41 , 0x3E}; // O rom char* ASCII5 = {0x7F , 0x09 , 0x09 , 0x09 , 0x06, // P // 80 - 91 0x3E , 0x41 , 0x51 , 0x21 , 0x5E, // Q 0x7F , 0x09 , 0x09 , 0x19 , 0x66, // R 0x26 , 0x49 , 0x49 , 0x49 , 0x32, // S 0x01 , 0x01 , 0x7F , 0x01 , 0x01, // T 0x3F , 0x40 , 0x40 , 0x40 , 0x3F, // U 0x1F , 0x20 , 0x40 , 0x20 , 0x1F, // V 0x3F , 0x40 , 0x3C , 0x40 , 0x3F, // W 0x63 , 0x14 , 0x08 , 0x14 , 0x63, // X 0x07 , 0x08 , 0x70 , 0x08 , 0x07, // Y 0x71 , 0x49 , 0x45 , 0x43 , 0x00, // Z 0x00 , 0x7F , 0x41 , 0x41 , 0x00}; // [ rom char* ASCII6 = {0x02 , 0x04 , 0x08 , 0x10 , 0x20, // \ // 92 - 103 0x00 , 0x41 , 0x41 , 0x7F , 0x00, // ] 0x04 , 0x02 , 0x01 , 0x02 , 0x04, // ^ 0x80 , 0x80 , 0x80 , 0x80 , 0x80, // _ 0x00 , 0x03 , 0x07 , 0x00 , 0x00, // ` 0x20 , 0x54 , 0x54 , 0x54 , 0x78, // a 0x7F , 0x44 , 0x44 , 0x44 , 0x38, // b 0x38 , 0x44 , 0x44 , 0x44 , 0x28, // c 0x38 , 0x44 , 0x44 , 0x44 , 0x7F, // d 0x38 , 0x54 , 0x54 , 0x54 , 0x18, // e 0x08 , 0x7E , 0x09 , 0x09 , 0x00, // f 0x18 , 0xA4 , 0xA4 , 0xA4 , 0x7C}; // g rom char* ASCII7 = {0x7F , 0x04 , 0x04 , 0x78 , 0x00, // h // 104 - 115 0x00 , 0x00 , 0x7D , 0x00 , 0x00, // i 0x40 , 0x80 , 0x84 , 0x7D , 0x00, // j 0x7F , 0x10 , 0x28 , 0x44 , 0x00, // k 0x00 , 0x00 , 0x7F , 0x40 , 0x00, // l 0x7C , 0x04 , 0x18 , 0x04 , 0x78, // m 0x7C , 0x04 , 0x04 , 0x78 , 0x00, // n 0x38 , 0x44 , 0x44 , 0x44 , 0x38, // o 0xFC , 0x44 , 0x44 , 0x44 , 0x38, // p 0x38 , 0x44 , 0x44 , 0x44 , 0xFC, // q 0x44 , 0x78 , 0x44 , 0x04 , 0x08, // r 0x08 , 0x54 , 0x54 , 0x54 , 0x20}; // s rom char* ASCII8 = {0x04 , 0x3E , 0x44 , 0x24 , 0x00, // t // 116 - 126 0x3C , 0x40 , 0x20 , 0x7C , 0x00, // u 0x1C , 0x20 , 0x40 , 0x20 , 0x1C, // v 0x3C , 0x60 , 0x30 , 0x60 , 0x3C, // w 0x6C , 0x10 , 0x10 , 0x6C , 0x00, // x 0x9C , 0xA0 , 0x60 , 0x3C , 0x00, // y 0x64 , 0x54 , 0x54 , 0x4C , 0x00, // z 0x08 , 0x3E , 0x41 , 0x41 , 0x00, // { 0x00 , 0x00 , 0x7F , 0x00 , 0x00, // | 0x00 , 0x41 , 0x41 , 0x3E , 0x08, // } 0x02 , 0x01 , 0x02 , 0x01 , 0x00}; // ~ //Global Variables char mx_page; char mx_currentx; char mx_currenty; //Internal Prototypes void MX_LCD_Enable (void); void MX_Write_Command(char cmd, char chip); void GotoXY(char x, char y); void MX_WriteData(char data); char MX_ReadData(void); //Internal Functions void MX_LCD_Enable (void) { set_bit(MX_CONTROL_PORT, MX_ENABLE); //delay_10us(1); //Min delay 450ns nop(); nop(); nop(); nop(); nop(); clear_bit(MX_CONTROL_PORT, MX_ENABLE); //delay_10us(1); //Min delay 1.5us nop(); nop(); nop(); nop(); nop(); } void MX_Write_Command(char cmd, char chip) { if(chip == MX_CHIP1) //Select Chip 1 { clear_bit(MX_CONTROL_PORT, MX_CS2); set_bit(MX_CONTROL_PORT, MX_CS1); } else if(chip == MX_CHIP2) //Select Chip 2 { clear_bit(MX_CONTROL_PORT, MX_CS1); set_bit(MX_CONTROL_PORT, MX_CS2); } clear_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Write Command clear_bit(MX_CONTROL_PORT, MX_DAT_INST); //Instruction code MX_DATA_TRIS = 0x00; //Configure data port as output MX_DATA_PORT = cmd; MX_LCD_Enable(); MX_DATA_PORT = 0x00; } void MX_GotoXY(char x, char y) { char chip = MX_CHIP1; char cmd; if(x > 127) x = 0; //Ensure that coordinates are legal if(y > 63) y = 0; mx_currentx = x; mx_currenty = y; mx_page = y / 8; if(x >= 64) //Select the right chip { x = x - 64; chip = MX_CHIP2; } cmd = MX_LCD_SET_PAGE | mx_page; //Set y address on both chips MX_Write_Command(cmd, MX_CHIP1); MX_Write_Command(cmd, MX_CHIP2); cmd = MX_LCD_SET_ADD | x; //Set x address on active chip MX_Write_Command(cmd, chip); } void MX_WriteData(char data) { char displayData, yOffset, cmdPort; if(mx_currentx >= 128) return; if(mx_currentx < 64) { clear_bit(MX_CONTROL_PORT, MX_CS2); //Select chip 1 set_bit(MX_CONTROL_PORT, MX_CS1); } else if(mx_currentx >= 64) { clear_bit(MX_CONTROL_PORT, MX_CS1); //Select chip 2 set_bit(MX_CONTROL_PORT, MX_CS2); } if(mx_currentx == 64) //Chip 2 X Address = 0 MX_Write_Command(MX_LCD_SET_ADD, MX_CHIP2); set_bit(MX_CONTROL_PORT, MX_DAT_INST); //Configure to send data clear_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Configure to write data MX_DATA_TRIS = 0x00; //Configure data port to Output yOffset = mx_currenty % 8; if(yOffset != 0) //First page? { cmdPort = MX_CONTROL_PORT; //Save command port displayData = MX_ReadData(); MX_CONTROL_PORT = cmdPort; //Restore command port MX_DATA_TRIS = 0x00; //Data port is output displayData = displayData | (data << yOffset); MX_DATA_PORT = displayData; //Write data MX_LCD_Enable(); //Enable // second page MX_GotoXY(mx_currentx, (mx_currenty + 8)); displayData = MX_ReadData(); MX_CONTROL_PORT = cmdPort; //Restore command port MX_DATA_TRIS = 0x00; //Data port is output displayData = displayData | (data >> (8-yOffset)); MX_DATA_PORT = displayData; //Write data MX_LCD_Enable(); //Enable MX_GotoXY(mx_currentx + 1, (mx_currenty - 8)); } else { MX_DATA_PORT = data; //Write data MX_LCD_Enable(); //Enable mx_currentx = mx_currentx + 1; } MX_DATA_PORT = 0x00; } char MX_ReadData(void) { char data, i; MX_DATA_PORT = 0x00; MX_DATA_TRIS = 0xFF; //Data port is input set_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Configure to read data set_bit(MX_CONTROL_PORT, MX_DAT_INST); //Configure to send data if(mx_currentx < 64) { clear_bit(MX_CONTROL_PORT, MX_CS2); //Select chip 1 set_bit(MX_CONTROL_PORT, MX_CS1); } else if(mx_currentx >= 64) { clear_bit(MX_CONTROL_PORT, MX_CS1); //Select chip 2 set_bit(MX_CONTROL_PORT, MX_CS2); } set_bit(MX_CONTROL_PORT, MX_ENABLE); //Set the enable bit for (i=0; i<3; i++); clear_bit(MX_CONTROL_PORT, MX_ENABLE); //Clear the enable bit for (i=0; i<8; i++); //Min 1.5us delay set_bit(MX_CONTROL_PORT, MX_ENABLE); //Set the enable bit for (i=0; i<15; i++); //Min 450ns delay data = MX_DATA_PORT; //Read Data clear_bit(MX_CONTROL_PORT, MX_ENABLE); //Clear the enable bit MX_DATA_TRIS = 0x00; //Configure port as output MX_GotoXY(mx_currentx, mx_currenty); return data; } // Dummy function to close the defines section off void CUSTOM_Dummy_Function(); void CUSTOM_Dummy_Function() { } void FCD_Custom0_LCD_Init() { mx_currentx = 0; mx_currenty = 0; mx_page = 0; MX_DATA_TRIS = 0x00; //Convert data port to output MX_DATA_PORT = 0x00; clear_bit(MX_CONTROL_TRIS, MX_ENABLE); //Convert control pins to output clear_bit(MX_CONTROL_TRIS, MX_DAT_INST); clear_bit(MX_CONTROL_TRIS, MX_CS1); clear_bit(MX_CONTROL_TRIS, MX_CS2); clear_bit(MX_CONTROL_TRIS, MX_READ_WRITE); set_bit(MX_CONTROL_PORT, MX_ENABLE); clear_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Write Command clear_bit(MX_CONTROL_PORT, MX_DAT_INST); //Instruction code set_bit(MX_CONTROL_PORT, MX_CS1); //Select Chip 1 clear_bit(MX_CONTROL_PORT, MX_CS2); MX_Write_Command(MX_LCD_ON, MX_CHIP1); //Switch on LCD controller chips MX_Write_Command(MX_LCD_ON, MX_CHIP2); MX_Write_Command(MX_LCD_DISP_START, MX_CHIP1); //Configure the display start address MX_Write_Command(MX_LCD_DISP_START, MX_CHIP2); FCD_Custom0_LCD_Clear(); MX_GotoXY(0,0); } void FCD_Custom0_LCD_Clear() { FCD_Custom0_LCD_Draw_Rect(0, 0, 127, 63, MX_WHITE); } void FCD_Custom0_LCD_PlotPixel(char x, char y, char colour) { char data, mod_y; mod_y = y%8; MX_GotoXY(x, y - mod_y); data = MX_ReadData(); //Read 8 pixels from display if (colour) data = data | (0x01 << mod_y); //Set Pixel else data = data & (~(0x01 << mod_y)); //Clear Pixel MX_WriteData(data); } void FCD_Custom0_LCD_Draw_Line(char x, char y, char x2, char y2, char colour) { int C1, M1; signed int D1 = 0; signed int Pixelx = x2 - x; //number of X-pixels; signed int Pixely = y2 - y; //Number of Y-pixels signed char Xinc = 1; signed char Yinc = 1; if (Pixelx < 0) //If negative X direction { Xinc = -1; Pixelx = Pixelx * -1; } if (Pixely < 0) //If negative Y direction { Yinc = -1; Pixely = Pixely * -1; } if (Pixely <= Pixelx) { C1 = 2 * Pixelx; M1 = 2 * Pixely; while (x != x2) { FCD_Custom0_LCD_PlotPixel(x, y, colour); //ForePlot line x = x + Xinc; D1 = D1 + M1; if (D1 > Pixelx) { y = y + Yinc; D1 = D1 - C1; } } } else { C1 = 2 * Pixely; M1 = 2 * Pixelx; while (y != y2) { FCD_Custom0_LCD_PlotPixel(x, y, colour); //ForePlot Line y = y + Yinc; D1 = D1 + M1; if (D1 > Pixely) { x = x + Xinc; D1 = D1 - C1; } } FCD_Custom0_LCD_PlotPixel(x, y, colour); } } void FCD_Custom0_LCD_Draw_Rect(char x, char y, char width, char height, char colour) { char mask, pageOffset, h, i, data; if(colour) colour = 255; height = height + 1; pageOffset = y % 8; y = y - pageOffset; mask = 0xFF; if(height < (8 - pageOffset)) { mask = mask >> (8-height); h = height; } else h = (8 - pageOffset); mask = mask << pageOffset; MX_GotoXY(x, y); for(i=0; i<=width; i++) { data = MX_ReadData(); if(colour) data = data | mask; else data = data & (~mask); MX_WriteData(data); } while((h + 8) <= height) { h = h + 8; y = y + 8; MX_GotoXY(x, y); for(i=0; i<=width; i++) MX_WriteData(colour); } if(h < height) { mask = ~(0xFF << (height - h)); MX_GotoXY(x, (y + 8)); for(i=0; i<=width; i++) { data = MX_ReadData(); if(colour) data = data | mask; else data = data & (~mask); MX_WriteData(data); } } } void FCD_Custom0_LCD_Print_String(char* String, MX_UINT8 MSZ_String, char X, char Y, char Font, char Transparent, char Colour) { char xpix, ypix, pos_Str, count, xcount, ycount, height, width, i; char Fontwidth = 1; //First we assume small font char Fontheight = 1; char inv_colour = 1; char temp[6]; temp[5] = 0x00; //Spacing Line if (Colour) inv_colour = 0; if (Font == 1) //Double Height Sizes //Double Width { Fontwidth = 2; } if (Font == 2) //Double Height and Width Sizes { Fontwidth = 2; Fontheight = 2; } if (Font == 3) //Double Height Sizes { Fontheight = 2; } xcount = 0; for (i=0;i 10000 || Number < -1000) string_length = 5; else if(Number > 1000 || Number < -100) string_length = 4; else if(Number > 100 || Number < -10) string_length = 3; else if(Number > 10 || Number < -1) string_length = 2; else string_length = 1; char temp_str[6]; FCI_TOSTRING(Number,temp_str,string_length); //Convert number to String FCD_Custom0_LCD_Print_String(temp_str, string_length, X, Y, Font, Transparent, Colour); //Send string to Print function } void FCD_Custom0_LCD_Invert_Rect(char x, char y, char width, char height) { char mask, pageOffset, h, i, data, tmpData; height++; pageOffset = y % 8; y = y - pageOffset; mask = 0xFF; if(height < (8 - pageOffset)) { mask = mask >> (8-height); h = height; } else { h = 8 - pageOffset; } mask = mask << pageOffset; MX_GotoXY(x, y); for(i=0; i<=width; i++) { data = MX_ReadData(); tmpData = ~data; data = (tmpData & mask) | (data & ~mask); MX_WriteData(data); } while((h + 8) <= height) { h = h + 8; y = y + 8; MX_GotoXY(x, y); for(i=0; i<=width; i++) { data = MX_ReadData(); MX_WriteData(~data); } } if(h < height) { mask = ~(0xFF << (height-h)); MX_GotoXY(x, y+8); for(i=0; i<=width; i++) { data = MX_ReadData(); tmpData = ~data; data = (tmpData & mask) | (data & ~mask); MX_WriteData(data); } } } //RS232(0): //Macro implementaties void FCD_RS2320_SendRS232Char(MX_SINT16 nChar) { RS232_2_UART_Send ( nChar); } void FCD_RS2320_SendRS232String(MX_STRING String, MX_UINT8 MSZ_String) { MX_UINT8 idx; for(idx = 0; idx < MSZ_String; idx++) { if (String[idx] == 0) break; else RS232_2_UART_Send ( String[idx] ); } } MX_SINT16 FCD_RS2320_ReceiveRS232Char(MX_UINT8 nTimeout) { return ( RS232_2_UART_Receive ( nTimeout) ); } void FCD_RS2320_ReceiveRS232String(MX_CHAR* FCR_RETVAL, MX_UINT8 FCR_RETVAL_SIZE, MX_UINT8 nTimeout, MX_UINT8 NumBytes) { MX_UINT8 idx; MX_SINT16 RS232_TO = 255; MX_SINT16 in; if ( 1 != 0 ) RS232_TO = 256; if (NumBytes > FCR_RETVAL_SIZE) NumBytes = FCR_RETVAL_SIZE; for (idx = 0; idx < NumBytes; idx++) { in = RS232_2_UART_Receive ( nTimeout); if(in < RS232_TO) FCR_RETVAL[idx] = in & 0xFF; else break; } if (idx < FCR_RETVAL_SIZE) FCR_RETVAL[idx] = 0; } void FCD_RS2320_ChangeHWBaud(MX_UINT8 newbaud) { RS232_2_UART_Update_Baud (newbaud); } //ADC(0): //Macro implementaties void FCD_ADC0_SampleADC() { //unused } MX_UINT8 FCD_ADC0_ReadAsByte() { MX_UINT8 retVal; //Configure & Enable ADC Channel FC_CAL_Enable_ADC ( ADC_3_MX_ADC_CHANNEL , ADC_3_MX_ADC_CONVSP , ADC_3_MX_ADC_VREFOP , ADC_3_MX_ADC_ACTIME ); retVal = FC_CAL_Sample_ADC( 0 ); //Perform Sample - Return as byte FC_CAL_Disable_ADC (); return (retVal); } MX_UINT16 FCD_ADC0_ReadAsInt() { MX_UINT16 retVal; //Configure & Enable ADC Channel FC_CAL_Enable_ADC ( ADC_3_MX_ADC_CHANNEL , ADC_3_MX_ADC_CONVSP , ADC_3_MX_ADC_VREFOP , ADC_3_MX_ADC_ACTIME ); retVal = FC_CAL_Sample_ADC( 1 ); //Perform Sample - Return as MX_UINT16 FC_CAL_Disable_ADC (); return (retVal); } MX_FLOAT FCD_ADC0_ReadAsVoltage() { MX_UINT16 iSample; MX_FLOAT fSample, fVoltage, fVperDiv; //Configure & Enable ADC Channel FC_CAL_Enable_ADC ( ADC_3_MX_ADC_CHANNEL , ADC_3_MX_ADC_CONVSP , ADC_3_MX_ADC_VREFOP , ADC_3_MX_ADC_ACTIME ); #ifdef MX_ADC_BITS_8 iSample = FC_CAL_Sample_ADC( 0 ); //Perform Sample - Return as byte #else iSample = FC_CAL_Sample_ADC( 1 ); //Perform Sample - Return as MX_UINT16 #endif FC_CAL_Disable_ADC (); //Switch off ADC peripheral fVoltage = flt_fromi( ADC_3_MX_ADC_VREFVOL ); //Convert reference voltage count to floating point (0 - 500 x 10mV) fVoltage = flt_mul(fVoltage, 0.01); //Convert reference voltage count to actual voltage (0 - 5) #ifdef MX_ADC_BITS_8 fVperDiv = flt_mul(fVoltage, 0.00390625); //Convert actual voltage to voltage per division (VRef / 256) #endif #ifdef MX_ADC_BITS_10 fVperDiv = flt_mul(fVoltage, 0.000976); //Convert actual voltage to voltage per division (VRef / 1024) #endif #ifdef MX_ADC_BITS_12 fVperDiv = flt_mul(fVoltage, 0.00024414); //Convert actual voltage to voltage per division (VRef / 4096) #endif fSample = flt_fromi(iSample); //Convert to floating point variable fVoltage = flt_mul(fSample, fVperDiv); //Calculate floating point voltage return (fVoltage); } void FCD_ADC0_ReadAsString(MX_CHAR* FCR_RETVAL, MX_UINT8 FCR_RETVAL_SIZE) { MX_FLOAT fVoltage; fVoltage = FCD_ADC0_ReadAsVoltage(); FCI_FLOAT_TO_STRING(fVoltage, 2, FCR_RETVAL, FCR_RETVAL_SIZE); //Convert to String } void FCD_ADC0_ADC_RAW_Configure_Channel() { //Configure & Enable ADC Channel FC_CAL_Enable_ADC ( ADC_3_MX_ADC_CHANNEL , ADC_3_MX_ADC_CONVSP , ADC_3_MX_ADC_VREFOP , ADC_3_MX_ADC_ACTIME ); } MX_UINT8 FCD_ADC0_ADC_RAW_Sample_Channel_Byte() { return FC_CAL_Sample_ADC( 0 ); //Perform Sample - Return as byte } MX_UINT16 FCD_ADC0_ADC_RAW_Sample_Channel_Int() { return FC_CAL_Sample_ADC( 1 ); //Perform Sample - Return as MX_UINT16 } MX_UINT8 FCD_ADC0_ADC_RAW_Average_Channel_Byte(MX_UINT8 NumSamples, MX_UINT8 DelayUs) { MX_UINT32 average = 0; MX_UINT8 count; for (count=0; count /* ----- Change the 'unique' value for each in the custom code for each addition Wrap MX_UNIQUE around each static non-unique name: void MX_UNIQUE(GotoXY)(char x, char y) ..... MX_UNIQUE(GotoXY)(57, 21); Etc... ----- */ #undef MX_LCD_INSTANCE #define MX_LCD_INSTANCE 1 #define MX_UNIQUE(name) MXU_##MX_LCD_INSTANCE_##name // Remove any previous defines #undef MX_DATA_PORT #undef MX_DATA_TRIS #undef MX_CONTROL_PORT #undef MX_CONTROL_TRIS #undef MX_CS1 #undef MX_CS2 #undef MX_DAT_INST #undef MX_ENABLE #undef MX_READ_WRITE //Common defines #define MX_DATA_PORT portf #define MX_DATA_TRIS trisf #define MX_CONTROL_PORT porta #define MX_CONTROL_TRIS trisa #define MX_CS1 3 #define MX_CS2 4 #define MX_DAT_INST 0 #define MX_ENABLE 2 #define MX_READ_WRITE 1 //Static defines #ifndef MX_LCD_INITIALISED // Only do this once #define MX_LCD_INITIALISED #define MX_CHIP1 0x00 #define MX_CHIP2 0x01 #define MX_LCD_ON 0x3F #define MX_LCD_OFF 0x3E #define MX_LCD_SET_ADD 0x40 #define MX_LCD_SET_PAGE 0xB8 #define MX_LCD_DISP_START 0xC0 #define MX_BLACK 0xFF #define MX_WHITE 0x00 //ASCII Pixel data #ifndef MX_FCD_CUSTOMCMPNT #define MX_FCD_CUSTOMCMPNT rom char* ASCII1 = {0x00 , 0x00 , 0x00 , 0x00 , 0x00, // space // 32 - 43 0x00 , 0x06 , 0x5F , 0x06 , 0x00, // ! 0x07 , 0x03 , 0x00 , 0x07 , 0x03, // '' 0x24 , 0x7E , 0x24 , 0x7E , 0x24, // # 0x24 , 0x2B , 0x6A , 0x12 , 0x00, // $ 0x63 , 0x13 , 0x08 , 0x64 , 0x63, // % 0x36 , 0x49 , 0x56 , 0x20 , 0x50, // & 0x00 , 0x07 , 0x03 , 0x00 , 0x00, // ' 0x00 , 0x3E , 0x41 , 0x00 , 0x00, // ( 0x00 , 0x41 , 0x3E , 0x00 , 0x00, // ) 0x08 , 0x3E , 0x1C , 0x3E , 0x08, // * 0x08 , 0x08 , 0x3E , 0x08 , 0x08}; // + rom char* ASCII2 = {0x00 , 0xE0 , 0x60 , 0x00 , 0x00, // , // 44 - 55 0x08 , 0x08 , 0x08 , 0x08 , 0x08, // - 0x00 , 0x60 , 0x60 , 0x00 , 0x00, // . 0x20 , 0x10 , 0x08 , 0x04 , 0x02, // / 0x3E , 0x51 , 0x49 , 0x45 , 0x3E, // 0 0x00 , 0x42 , 0x7F , 0x40 , 0x00, // 1 0x62 , 0x51 , 0x49 , 0x49 , 0x46, // 2 0x22 , 0x49 , 0x49 , 0x49 , 0x36, // 3 0x18 , 0x14 , 0x12 , 0x7F , 0x10, // 4 0x2F , 0x49 , 0x49 , 0x49 , 0x31, // 5 0x3C , 0x4A , 0x49 , 0x49 , 0x30, // 6 0x01 , 0x71 , 0x09 , 0x05 , 0x03}; // 7 rom char* ASCII3 = {0x36 , 0x49 , 0x49 , 0x49 , 0x36, // 8 // 56 - 67 0x06 , 0x49 , 0x49 , 0x29 , 0x1E, // 9 0x00 , 0x6C , 0x6C , 0x00 , 0x00, // : 0x00 , 0xEC , 0x6C , 0x00 , 0x00, // ; 0x08 , 0x14 , 0x22 , 0x41 , 0x00, // < 0x24 , 0x24 , 0x24 , 0x24 , 0x24, // = 0x00 , 0x41 , 0x22 , 0x14 , 0x08, // > 0x02 , 0x01 , 0x59 , 0x09 , 0x06, // ? 0x3E , 0x41 , 0x5D , 0x55 , 0x1E, // @ 0x7E , 0x09 , 0x09 , 0x09 , 0x7E, // A 0x7F , 0x49 , 0x49 , 0x49 , 0x36, // B 0x3E , 0x41 , 0x41 , 0x41 , 0x22}; // C rom char* ASCII4 = {0x7F , 0x41 , 0x41 , 0x41 , 0x3E, // D // 68 - 79 0x7F , 0x49 , 0x49 , 0x49 , 0x41, // E 0x7F , 0x09 , 0x09 , 0x09 , 0x01, // F 0x3E , 0x41 , 0x49 , 0x49 , 0x7A, // G 0x7F , 0x08 , 0x08 , 0x08 , 0x7F, // H 0x00 , 0x41 , 0x7F , 0x41 , 0x00, // I 0x30 , 0x40 , 0x40 , 0x40 , 0x3F, // J 0x7F , 0x08 , 0x14 , 0x22 , 0x41, // K 0x7F , 0x40 , 0x40 , 0x40 , 0x40, // L 0x7F , 0x02 , 0x04 , 0x02 , 0x7F, // M 0x7F , 0x02 , 0x04 , 0x08 , 0x7F, // N 0x3E , 0x41 , 0x41 , 0x41 , 0x3E}; // O rom char* ASCII5 = {0x7F , 0x09 , 0x09 , 0x09 , 0x06, // P // 80 - 91 0x3E , 0x41 , 0x51 , 0x21 , 0x5E, // Q 0x7F , 0x09 , 0x09 , 0x19 , 0x66, // R 0x26 , 0x49 , 0x49 , 0x49 , 0x32, // S 0x01 , 0x01 , 0x7F , 0x01 , 0x01, // T 0x3F , 0x40 , 0x40 , 0x40 , 0x3F, // U 0x1F , 0x20 , 0x40 , 0x20 , 0x1F, // V 0x3F , 0x40 , 0x3C , 0x40 , 0x3F, // W 0x63 , 0x14 , 0x08 , 0x14 , 0x63, // X 0x07 , 0x08 , 0x70 , 0x08 , 0x07, // Y 0x71 , 0x49 , 0x45 , 0x43 , 0x00, // Z 0x00 , 0x7F , 0x41 , 0x41 , 0x00}; // [ rom char* ASCII6 = {0x02 , 0x04 , 0x08 , 0x10 , 0x20, // \ // 92 - 103 0x00 , 0x41 , 0x41 , 0x7F , 0x00, // ] 0x04 , 0x02 , 0x01 , 0x02 , 0x04, // ^ 0x80 , 0x80 , 0x80 , 0x80 , 0x80, // _ 0x00 , 0x03 , 0x07 , 0x00 , 0x00, // ` 0x20 , 0x54 , 0x54 , 0x54 , 0x78, // a 0x7F , 0x44 , 0x44 , 0x44 , 0x38, // b 0x38 , 0x44 , 0x44 , 0x44 , 0x28, // c 0x38 , 0x44 , 0x44 , 0x44 , 0x7F, // d 0x38 , 0x54 , 0x54 , 0x54 , 0x18, // e 0x08 , 0x7E , 0x09 , 0x09 , 0x00, // f 0x18 , 0xA4 , 0xA4 , 0xA4 , 0x7C}; // g rom char* ASCII7 = {0x7F , 0x04 , 0x04 , 0x78 , 0x00, // h // 104 - 115 0x00 , 0x00 , 0x7D , 0x00 , 0x00, // i 0x40 , 0x80 , 0x84 , 0x7D , 0x00, // j 0x7F , 0x10 , 0x28 , 0x44 , 0x00, // k 0x00 , 0x00 , 0x7F , 0x40 , 0x00, // l 0x7C , 0x04 , 0x18 , 0x04 , 0x78, // m 0x7C , 0x04 , 0x04 , 0x78 , 0x00, // n 0x38 , 0x44 , 0x44 , 0x44 , 0x38, // o 0xFC , 0x44 , 0x44 , 0x44 , 0x38, // p 0x38 , 0x44 , 0x44 , 0x44 , 0xFC, // q 0x44 , 0x78 , 0x44 , 0x04 , 0x08, // r 0x08 , 0x54 , 0x54 , 0x54 , 0x20}; // s rom char* ASCII8 = {0x04 , 0x3E , 0x44 , 0x24 , 0x00, // t // 116 - 126 0x3C , 0x40 , 0x20 , 0x7C , 0x00, // u 0x1C , 0x20 , 0x40 , 0x20 , 0x1C, // v 0x3C , 0x60 , 0x30 , 0x60 , 0x3C, // w 0x6C , 0x10 , 0x10 , 0x6C , 0x00, // x 0x9C , 0xA0 , 0x60 , 0x3C , 0x00, // y 0x64 , 0x54 , 0x54 , 0x4C , 0x00, // z 0x08 , 0x3E , 0x41 , 0x41 , 0x00, // { 0x00 , 0x00 , 0x7F , 0x00 , 0x00, // | 0x00 , 0x41 , 0x41 , 0x3E , 0x08, // } 0x02 , 0x01 , 0x02 , 0x01 , 0x00}; // ~ #endif // #ifndef MX_LCD_INITIALISED // Only do this once //Global Variables char MX_UNIQUE(page); char MX_UNIQUE(currentx); char MX_UNIQUE(currenty); //Internal Prototypes void MX_UNIQUE(LCD_Enable)(void); void MX_UNIQUE(Write_Command)(char cmd, char chip); void MX_UNIQUE(GotoXY)(char x, char y); void MX_UNIQUE(WriteData)(char data); char MX_UNIQUE(ReadData)(void); //Internal Functions void MX_LCD_Enable (void) { set_bit(MX_CONTROL_PORT, MX_ENABLE); //delay_10us(1); //Min delay 450ns nop(); nop(); nop(); nop(); nop(); clear_bit(MX_CONTROL_PORT, MX_ENABLE); //delay_10us(1); //Min delay 1.5us nop(); nop(); nop(); nop(); nop(); } void MX_Write_Command(char cmd, char chip) { if(chip == MX_CHIP1) //Select Chip 1 { clear_bit(MX_CONTROL_PORT, MX_CS2); set_bit(MX_CONTROL_PORT, MX_CS1); } else if(chip == MX_CHIP2) //Select Chip 2 { clear_bit(MX_CONTROL_PORT, MX_CS1); set_bit(MX_CONTROL_PORT, MX_CS2); } clear_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Write Command clear_bit(MX_CONTROL_PORT, MX_DAT_INST); //Instruction code MX_DATA_TRIS = 0x00; //Configure data port as output MX_DATA_PORT = cmd; MX_LCD_Enable(); MX_DATA_PORT = 0x00; } void MX_GotoXY(char x, char y) { char chip = MX_CHIP1; char cmd; if(x > 127) x = 0; //Ensure that coordinates are legal if(y > 63) y = 0; mx_currentx = x; mx_currenty = y; mx_page = y / 8; if(x >= 64) //Select the right chip { x = x - 64; chip = MX_CHIP2; } cmd = MX_LCD_SET_PAGE | mx_page; //Set y address on both chips MX_Write_Command(cmd, MX_CHIP1); MX_Write_Command(cmd, MX_CHIP2); cmd = MX_LCD_SET_ADD | x; //Set x address on active chip MX_Write_Command(cmd, chip); } void MX_WriteData(char data) { char displayData, yOffset, cmdPort; if(mx_currentx >= 128) return; if(mx_currentx < 64) { clear_bit(MX_CONTROL_PORT, MX_CS2); //Select chip 1 set_bit(MX_CONTROL_PORT, MX_CS1); } else if(mx_currentx >= 64) { clear_bit(MX_CONTROL_PORT, MX_CS1); //Select chip 2 set_bit(MX_CONTROL_PORT, MX_CS2); } if(mx_currentx == 64) //Chip 2 X Address = 0 MX_Write_Command(MX_LCD_SET_ADD, MX_CHIP2); set_bit(MX_CONTROL_PORT, MX_DAT_INST); //Configure to send data clear_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Configure to write data MX_DATA_TRIS = 0x00; //Configure data port to Output yOffset = mx_currenty % 8; if(yOffset != 0) //First page? { cmdPort = MX_CONTROL_PORT; //Save command port displayData = MX_ReadData(); MX_CONTROL_PORT = cmdPort; //Restore command port MX_DATA_TRIS = 0x00; //Data port is output displayData = displayData | (data << yOffset); MX_DATA_PORT = displayData; //Write data MX_LCD_Enable(); //Enable // second page MX_GotoXY(mx_currentx, (mx_currenty + 8)); displayData = MX_ReadData(); MX_CONTROL_PORT = cmdPort; //Restore command port MX_DATA_TRIS = 0x00; //Data port is output displayData = displayData | (data >> (8-yOffset)); MX_DATA_PORT = displayData; //Write data MX_LCD_Enable(); //Enable MX_GotoXY(mx_currentx + 1, (mx_currenty - 8)); } else { MX_DATA_PORT = data; //Write data MX_LCD_Enable(); //Enable mx_currentx = mx_currentx + 1; } MX_DATA_PORT = 0x00; } char MX_ReadData(void) { char data, i; MX_DATA_PORT = 0x00; MX_DATA_TRIS = 0xFF; //Data port is input set_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Configure to read data set_bit(MX_CONTROL_PORT, MX_DAT_INST); //Configure to send data if(mx_currentx < 64) { clear_bit(MX_CONTROL_PORT, MX_CS2); //Select chip 1 set_bit(MX_CONTROL_PORT, MX_CS1); } else if(mx_currentx >= 64) { clear_bit(MX_CONTROL_PORT, MX_CS1); //Select chip 2 set_bit(MX_CONTROL_PORT, MX_CS2); } set_bit(MX_CONTROL_PORT, MX_ENABLE); //Set the enable bit for (i=0; i<3; i++); clear_bit(MX_CONTROL_PORT, MX_ENABLE); //Clear the enable bit for (i=0; i<8; i++); //Min 1.5us delay set_bit(MX_CONTROL_PORT, MX_ENABLE); //Set the enable bit for (i=0; i<15; i++); //Min 450ns delay data = MX_DATA_PORT; //Read Data clear_bit(MX_CONTROL_PORT, MX_ENABLE); //Clear the enable bit MX_DATA_TRIS = 0x00; //Configure port as output MX_GotoXY(mx_currentx, mx_currenty); return data; } // Dummy function to close the defines section off void CUSTOM_Dummy_Function(); void CUSTOM_Dummy_Function() { } void FCD_Custom20_LCD_Init() { mx_currentx = 0; mx_currenty = 0; mx_page = 0; MX_DATA_TRIS = 0x00; //Convert data port to output MX_DATA_PORT = 0x00; clear_bit(MX_CONTROL_TRIS, MX_ENABLE); //Convert control pins to output clear_bit(MX_CONTROL_TRIS, MX_DAT_INST); clear_bit(MX_CONTROL_TRIS, MX_CS1); clear_bit(MX_CONTROL_TRIS, MX_CS2); clear_bit(MX_CONTROL_TRIS, MX_READ_WRITE); set_bit(MX_CONTROL_PORT, MX_ENABLE); clear_bit(MX_CONTROL_PORT, MX_READ_WRITE); //Write Command clear_bit(MX_CONTROL_PORT, MX_DAT_INST); //Instruction code set_bit(MX_CONTROL_PORT, MX_CS1); //Select Chip 1 clear_bit(MX_CONTROL_PORT, MX_CS2); MX_Write_Command(MX_LCD_ON, MX_CHIP1); //Switch on LCD controller chips MX_Write_Command(MX_LCD_ON, MX_CHIP2); MX_Write_Command(MX_LCD_DISP_START, MX_CHIP1); //Configure the display start address MX_Write_Command(MX_LCD_DISP_START, MX_CHIP2); FCD_Custom20_LCD_Clear(); MX_GotoXY(0,0); } void FCD_Custom20_LCD_Clear() { FCD_Custom20_LCD_Draw_Rect(0, 0, 127, 63, MX_WHITE); } void FCD_Custom20_LCD_PlotPixel(char x, char y, char colour) { char data, mod_y; mod_y = y%8; MX_GotoXY(x, y - mod_y); data = MX_ReadData(); //Read 8 pixels from display if (colour) data = data | (0x01 << mod_y); //Set Pixel else data = data & (~(0x01 << mod_y)); //Clear Pixel MX_WriteData(data); } void FCD_Custom20_LCD_Draw_Line(char x, char y, char x2, char y2, char colour) { int C1, M1; signed int D1 = 0; signed int Pixelx = x2 - x; //number of X-pixels; signed int Pixely = y2 - y; //Number of Y-pixels signed char Xinc = 1; signed char Yinc = 1; if (Pixelx < 0) //If negative X direction { Xinc = -1; Pixelx = Pixelx * -1; } if (Pixely < 0) //If negative Y direction { Yinc = -1; Pixely = Pixely * -1; } if (Pixely <= Pixelx) { C1 = 2 * Pixelx; M1 = 2 * Pixely; while (x != x2) { FCD_Custom20_LCD_PlotPixel(x, y, colour); //ForePlot line x = x + Xinc; D1 = D1 + M1; if (D1 > Pixelx) { y = y + Yinc; D1 = D1 - C1; } } } else { C1 = 2 * Pixely; M1 = 2 * Pixelx; while (y != y2) { FCD_Custom20_LCD_PlotPixel(x, y, colour); //ForePlot Line y = y + Yinc; D1 = D1 + M1; if (D1 > Pixely) { x = x + Xinc; D1 = D1 - C1; } } FCD_Custom20_LCD_PlotPixel(x, y, colour); } } void FCD_Custom20_LCD_Draw_Rect(char x, char y, char width, char height, char colour) { char mask, pageOffset, h, i, data; if(colour) colour = 255; height = height + 1; pageOffset = y % 8; y = y - pageOffset; mask = 0xFF; if(height < (8 - pageOffset)) { mask = mask >> (8-height); h = height; } else h = (8 - pageOffset); mask = mask << pageOffset; MX_GotoXY(x, y); for(i=0; i<=width; i++) { data = MX_ReadData(); if(colour) data = data | mask; else data = data & (~mask); MX_WriteData(data); } while((h + 8) <= height) { h = h + 8; y = y + 8; MX_GotoXY(x, y); for(i=0; i<=width; i++) MX_WriteData(colour); } if(h < height) { mask = ~(0xFF << (height - h)); MX_GotoXY(x, (y + 8)); for(i=0; i<=width; i++) { data = MX_ReadData(); if(colour) data = data | mask; else data = data & (~mask); MX_WriteData(data); } } } void FCD_Custom20_LCD_Print_String(char* String, MX_UINT8 MSZ_String, char X, char Y, char Font, char Transparent, char Colour) { char xpix, ypix, pos_Str, count, xcount, ycount, height, width, i; char Fontwidth = 1; //First we assume small font char Fontheight = 1; char inv_colour = 1; char temp[6]; temp[5] = 0x00; //Spacing Line if (Colour) inv_colour = 0; if (Font == 1) //Double Height Sizes //Double Width { Fontwidth = 2; } if (Font == 2) //Double Height and Width Sizes { Fontwidth = 2; Fontheight = 2; } if (Font == 3) //Double Height Sizes { Fontheight = 2; } xcount = 0; for (i=0;i 10000 || Number < -1000) string_length = 5; else if(Number > 1000 || Number < -100) string_length = 4; else if(Number > 100 || Number < -10) string_length = 3; else if(Number > 10 || Number < -1) string_length = 2; else string_length = 1; char temp_str[6]; FCI_TOSTRING(Number,temp_str,string_length); //Convert number to String FCD_Custom20_LCD_Print_String(temp_str, string_length, X, Y, Font, Transparent, Colour); //Send string to Print function } void FCD_Custom20_LCD_Invert_Rect(char x, char y, char width, char height) { char mask, pageOffset, h, i, data, tmpData; height++; pageOffset = y % 8; y = y - pageOffset; mask = 0xFF; if(height < (8 - pageOffset)) { mask = mask >> (8-height); h = height; } else { h = 8 - pageOffset; } mask = mask << pageOffset; MX_GotoXY(x, y); for(i=0; i<=width; i++) { data = MX_ReadData(); tmpData = ~data; data = (tmpData & mask) | (data & ~mask); MX_WriteData(data); } while((h + 8) <= height) { h = h + 8; y = y + 8; MX_GotoXY(x, y); for(i=0; i<=width; i++) { data = MX_ReadData(); MX_WriteData(~data); } } if(h < height) { mask = ~(0xFF << (height-h)); MX_GotoXY(x, y+8); for(i=0; i<=width; i++) { data = MX_ReadData(); tmpData = ~data; data = (tmpData & mask) | (data & ~mask); MX_WriteData(data); } } } #include "C:\Program Files (x86)\Flowcode\v5\CAL\includes.c" //Macro implementaties void FCM_DrawHomescreen1() { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Init() FCD_Custom0_LCD_Init(); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Init() FCD_Custom20_LCD_Init(); //Delay //Delay: 10 ms delay_ms(10); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Clear() FCD_Custom0_LCD_Clear(); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("Working", 0, 0, 0, 0, 1) FCD_Custom20_LCD_Print_String("Working", 7, 0, 0, 0, 0, 1); //Commentaar: //Draw Outline Frame //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(0, 0, 127, 63, 1) FCD_Custom0_LCD_Draw_Rect(0, 0, 127, 63, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(1, 1, 125, 61, 0) FCD_Custom0_LCD_Draw_Rect(1, 1, 125, 61, 0); //Commentaar: //Draw Vertical Line Middle Screen //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(63, 0, 63, 11, 1) FCD_Custom0_LCD_Draw_Line(63, 0, 63, 11, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(63, 22, 63, 63, 1) FCD_Custom0_LCD_Draw_Line(63, 22, 63, 63, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(0, 12, 127, 12, 1) FCD_Custom0_LCD_Draw_Line(0, 12, 127, 12, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(0, 22, 127, 22, 1) FCD_Custom0_LCD_Draw_Line(0, 22, 127, 22, 1); //Commentaar: //Draw Text //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(1, 1, 61, 10, 0) FCD_Custom0_LCD_Draw_Rect(1, 1, 61, 10, 0); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("Enabled", 11, 3, 0, 0, 1) FCD_Custom0_LCD_Print_String("Enabled", 7, 11, 3, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(65, 1, 62, 10, 0) FCD_Custom0_LCD_Draw_Rect(65, 1, 62, 10, 0); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("Enabled", 74, 3, 0, 0, 1) FCD_Custom0_LCD_Print_String("Enabled", 7, 74, 3, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("BUSV:", 38, 14, 0, 0, 1) FCD_Custom0_LCD_Print_String("BUSV:", 5, 38, 14, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("0.00V", 3, 25, 2, 0, 1) FCD_Custom0_LCD_Print_String("0.00V", 5, 3, 25, 2, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("0.00A", 3, 45, 2, 0, 1) FCD_Custom0_LCD_Print_String("0.00A", 5, 3, 45, 2, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("0.00V", 66, 25, 2, 0, 1) FCD_Custom0_LCD_Print_String("0.00V", 5, 66, 25, 2, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("0.00A", 66, 45, 2, 0, 1) FCD_Custom0_LCD_Print_String("0.00A", 5, 66, 45, 2, 0, 1); } void FCM_DATA_RS232() { //Component Macro Aanroepen //Component Macro Aanroepen: RS232_Data_RX=ReceiveRS232Char(40) FCV_RS232_DATA_RX = FCD_RS2320_ReceiveRS232Char(40); //Component Macro Aanroepen //Component Macro Aanroepen: RS232_Data_RX_Str=ReceiveRS232String(20, 20) FCD_RS2320_ReceiveRS232String(FCV_RS232_DATA_RX_STR,FCSZ_RS232_DATA_RX_STR, 20, 20); } void FCM_Check_RS232() { //Lus //Lus: While 1 while (1) { //Decision //Decision: RS232_Data_RX = 100? if (FCV_RS232_DATA_RX == 100) { //Component Macro Aanroepen //Component Macro Aanroepen: SendRS232Char(101) FCD_RS2320_SendRS232Char(101); //Spring naar Connection Point //Spring naar Connection Point: [A]: A goto FCC_Check_RS232_A; // } else { } } //Connection Point //Connection Point: [A]: A FCC_Check_RS232_A: ; } void FCM_VoltageReg_5VEN() { //Decision //Decision: VoltageReg_5V = 1? if (FCV_VOLTAGEREG_5V == 1) { //Decision //Decision: VoltageReg_5VEN = 1? if (FCV_VOLTAGEREG_5VEN == 1) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(1, 1, 61, 10, 1) FCD_Custom0_LCD_Draw_Rect(1, 1, 61, 10, 1); //Calculation //Calculation: // VoltageReg_5VEN = 0 FCV_VOLTAGEREG_5VEN = 0; // } else { } //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("Enabled", 11, 3, 0, 0, 0) FCD_Custom0_LCD_Print_String("Enabled", 7, 11, 3, 0, 0, 0); } else { //Decision //Decision: VoltageReg_5VEN = 0? if (FCV_VOLTAGEREG_5VEN == 0) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(1, 1, 61, 10, 0) FCD_Custom0_LCD_Draw_Rect(1, 1, 61, 10, 0); //Calculation //Calculation: // VoltageReg_5VEN = 1 FCV_VOLTAGEREG_5VEN = 1; // } else { } //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("Enabled", 11, 3, 0, 0, 1) FCD_Custom0_LCD_Print_String("Enabled", 7, 11, 3, 0, 0, 1); } } void FCM_BUS_Voltage() { //Component Macro Aanroepen //Component Macro Aanroepen: ADC_RAW_Configure_Channel() FCD_ADC0_ADC_RAW_Configure_Channel(); //Component Macro Aanroepen //Component Macro Aanroepen: ADC_BUSVOLT=ReadAsInt() FCV_ADC_BUSVOLT = FCD_ADC0_ReadAsInt(); //Calculation //Calculation: // BUS_VOLT_FLT = ((4.94 / 1023) * ADC_BUSVOLT) * 64.75 // BUS_VOLT_Str = FloatToString$ (BUS_VOLT_FLT) FCV_BUS_VOLT_FLT = flt_mul((flt_mul((flt_div(4.94, 1023)), flt_fromi(FCV_ADC_BUSVOLT))), 64.75); FCI_FLOAT_TO_STRING(FCV_BUS_VOLT_FLT, 6, FCV_BUS_VOLT_STR,FCSZ_BUS_VOLT_STR); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(BUS_VOLT_Str, 68, 14, 0, 0, 1) FCD_Custom0_LCD_Print_String(FCV_BUS_VOLT_STR, FCSZ_BUS_VOLT_STR, 68, 14, 0, 0, 1); } void FCM_VREG_5V() { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(RS232_Data_RX_Str, 3, 25, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_RS232_DATA_RX_STR, FCSZ_RS232_DATA_RX_STR, 3, 25, 2, 0, 1); //Calculation //Calculation: // Comp_StrINF = StringToFloat$ (RS232_Data_RX_Str) FCV_COMP_STRINF = FCI_STRING_TO_FLOAT(FCV_RS232_DATA_RX_STR, FCSZ_RS232_DATA_RX_STR); //Decision //Decision: Comp_StrINF > 4.9? if (flt_gt(FCV_COMP_STRINF, 4.9)) { //Calculation //Calculation: // VoltageReg_5V = 1 FCV_VOLTAGEREG_5V = 1; } else { //Calculation //Calculation: // VoltageReg_5V = 0 FCV_VOLTAGEREG_5V = 0; } } void FCM_CURRENT_5V() { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(RS232_Data_RX_Str, 3, 45, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_RS232_DATA_RX_STR, FCSZ_RS232_DATA_RX_STR, 3, 45, 2, 0, 1); } void FCM_VREG_33V() { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(RS232_Data_RX_Str, 66, 25, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_RS232_DATA_RX_STR, FCSZ_RS232_DATA_RX_STR, 66, 25, 2, 0, 1); //Calculation //Calculation: // Comp_StrINF = StringToFloat$ (RS232_Data_RX_Str) FCV_COMP_STRINF = FCI_STRING_TO_FLOAT(FCV_RS232_DATA_RX_STR, FCSZ_RS232_DATA_RX_STR); //Decision //Decision: Comp_StrINF > 3.0? if (flt_gt(FCV_COMP_STRINF, 3.0)) { //Calculation //Calculation: // VoltageReg_33V = 1 FCV_VOLTAGEREG_33V = 1; } else { //Calculation //Calculation: // VoltageReg_33V = 0 FCV_VOLTAGEREG_33V = 0; } } void FCM_VREG_MENU() { //Delay //Delay: 10 ms delay_ms(10); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Clear() FCD_Custom0_LCD_Clear(); //Commentaar: //Draw Outline Frame //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(0, 0, 127, 63, 1) FCD_Custom0_LCD_Draw_Rect(0, 0, 127, 63, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Rect(1, 1, 125, 61, 0) FCD_Custom0_LCD_Draw_Rect(1, 1, 125, 61, 0); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("Setup", 47, 2, 0, 0, 1) FCD_Custom0_LCD_Print_String("Setup", 5, 47, 2, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("Variable Voltage", 15, 12, 0, 0, 1) FCD_Custom0_LCD_Print_String("Variable Voltage", 16, 15, 12, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(0, 20, 127, 20, 1) FCD_Custom0_LCD_Draw_Line(0, 20, 127, 20, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(0, 30, 127, 30, 1) FCD_Custom0_LCD_Draw_Line(0, 30, 127, 30, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("M1", 12, 22, 0, 0, 1) FCD_Custom0_LCD_Print_String("M1", 2, 12, 22, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(32, 20, 32, 30, 1) FCD_Custom0_LCD_Draw_Line(32, 20, 32, 30, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("M2", 44, 22, 0, 0, 1) FCD_Custom0_LCD_Print_String("M2", 2, 44, 22, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(63, 20, 63, 30, 1) FCD_Custom0_LCD_Draw_Line(63, 20, 63, 30, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("M3", 76, 22, 0, 0, 1) FCD_Custom0_LCD_Print_String("M3", 2, 76, 22, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(96, 20, 96, 30, 1) FCD_Custom0_LCD_Draw_Line(96, 20, 96, 30, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("M4", 108, 22, 0, 0, 1) FCD_Custom0_LCD_Print_String("M4", 2, 108, 22, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Draw_Line(63, 30, 63, 63, 1) FCD_Custom0_LCD_Draw_Line(63, 30, 63, 63, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("0.00V", 3, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String("0.00V", 5, 3, 40, 2, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("0.00A", 67, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String("0.00A", 5, 67, 40, 2, 0, 1); //Lus //Lus: While 1 while (1) { //Lus //Lus: While 1 while (1) { //Decision //Decision: RS232_Data_RX = 501? if (FCV_RS232_DATA_RX == 501) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Invert_Rect(1, 21, 30, 8) FCD_Custom0_LCD_Invert_Rect(1, 21, 30, 8); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 3, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 3, 40, 2, 0, 1); } else { //Decision //Decision: RS232_Data_RX = 502? if (FCV_RS232_DATA_RX == 502) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Invert_Rect(33, 21, 29, 8) FCD_Custom0_LCD_Invert_Rect(33, 21, 29, 8); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 3, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 3, 40, 2, 0, 1); } else { //Decision //Decision: RS232_Data_RX = 503? if (FCV_RS232_DATA_RX == 503) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Invert_Rect(64, 21, 31, 8) FCD_Custom0_LCD_Invert_Rect(64, 21, 31, 8); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 3, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 3, 40, 2, 0, 1); } else { //Decision //Decision: RS232_Data_RX = 504? if (FCV_RS232_DATA_RX == 504) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Invert_Rect(97, 21, 29, 8) FCD_Custom0_LCD_Invert_Rect(97, 21, 29, 8); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 3, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 3, 40, 2, 0, 1); } else { //Decision //Decision: RS232_Data_RX = 505? if (FCV_RS232_DATA_RX == 505) { //Calculation //Calculation: // VOLT_DISP = 1 // CURR_DISP = 0 FCV_VOLT_DISP = 1; FCV_CURR_DISP = 0; //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 3, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 3, 40, 2, 0, 1); } else { //Decision //Decision: RS232_Data_RX = 506? if (FCV_RS232_DATA_RX == 506) { //Calculation //Calculation: // VOLT_DISP = 0 // CURR_DISP = 1 FCV_VOLT_DISP = 0; FCV_CURR_DISP = 1; //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 67, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 67, 40, 2, 0, 1); } else { //Decision //Decision: RS232_Data_RX = 507? if (FCV_RS232_DATA_RX == 507) { //Spring naar Connection Point //Spring naar Connection Point: [A]: A goto FCC_VREG_MENU_A; // } else { } } } //Decision //Decision: RS232_Data_RX < 9? if (FCV_RS232_DATA_RX < 9) { //Calculation //Calculation: // VREG_SET = ToString$ (RS232_Data_RX) // VREG_SET_TOT = "00." + VREG_SET + "V" FCI_TOSTRING(FCV_RS232_DATA_RX, FCV_VREG_SET,FCSZ_VREG_SET); FCI_SHEAD("00.",3, FCV_VREG_SET,FCSZ_VREG_SET, FCI_TMP_STR,20); FCI_SHEAD(FCI_TMP_STR,20, "V",1, FCV_VREG_SET_TOT,FCSZ_VREG_SET_TOT); } else { //Calculation //Calculation: // VREG_SET = ToString$ (RS232_Data_RX) // VREG_SET_TENS = Left$ (VREG_SET,1) // VREG_SET_UNIT = Right$ (VREG_SET,1) // VREG_SET_TOT = "0" + VREG_SET_TENS + "." + VREG_SET_UNIT + "V" FCI_TOSTRING(FCV_RS232_DATA_RX, FCV_VREG_SET,FCSZ_VREG_SET); FCI_LEFTSTRING(FCV_VREG_SET, FCSZ_VREG_SET, 1, FCV_VREG_SET_TENS,FCSZ_VREG_SET_TENS); FCI_RIGHTSTRING(FCV_VREG_SET, FCSZ_VREG_SET, 1, FCV_VREG_SET_UNIT,FCSZ_VREG_SET_UNIT); FCI_SHEAD("0",1, FCV_VREG_SET_TENS,FCSZ_VREG_SET_TENS, FCI_TMP_STR,20); FCI_SHEAD(FCI_TMP_STR,20, ".",1, FCI_TMP_STR,20); FCI_SHEAD(FCI_TMP_STR,20, FCV_VREG_SET_UNIT,FCSZ_VREG_SET_UNIT, FCI_TMP_STR,20); FCI_SHEAD(FCI_TMP_STR,20, "V",1, FCV_VREG_SET_TOT,FCSZ_VREG_SET_TOT); } //Decision //Decision: RS232_Data_RX > 99? if (FCV_RS232_DATA_RX > 99) { //Calculation //Calculation: // VREG_SET = ToString$ (RS232_Data_RX) // VREG_SET_TENS = Left$ (VREG_SET,2) // VREG_SET_UNIT = Right$ (VREG_SET,1) // VREG_SET_TOT = VREG_SET_TENS + "." + VREG_SET_UNIT + "V" FCI_TOSTRING(FCV_RS232_DATA_RX, FCV_VREG_SET,FCSZ_VREG_SET); FCI_LEFTSTRING(FCV_VREG_SET, FCSZ_VREG_SET, 2, FCV_VREG_SET_TENS,FCSZ_VREG_SET_TENS); FCI_RIGHTSTRING(FCV_VREG_SET, FCSZ_VREG_SET, 1, FCV_VREG_SET_UNIT,FCSZ_VREG_SET_UNIT); FCI_SHEAD(FCV_VREG_SET_TENS,FCSZ_VREG_SET_TENS, ".",1, FCI_TMP_STR,20); FCI_SHEAD(FCI_TMP_STR,20, FCV_VREG_SET_UNIT,FCSZ_VREG_SET_UNIT, FCI_TMP_STR,20); FCI_SHEAD(FCI_TMP_STR,20, "V",1, FCV_VREG_SET_TOT,FCSZ_VREG_SET_TOT); // } else { } //Decision //Decision: VOLT_DISP = 1? if (FCV_VOLT_DISP == 1) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("***", 23, 31, 0, 0, 1) FCD_Custom0_LCD_Print_String("***", 3, 23, 31, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(" ", 90, 31, 0, 0, 1) FCD_Custom0_LCD_Print_String(" ", 3, 90, 31, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 3, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 3, 40, 2, 0, 1); } else { //Decision //Decision: CURR_DISP = 1? if (FCV_CURR_DISP == 1) { //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(" ", 23, 31, 0, 0, 1) FCD_Custom0_LCD_Print_String(" ", 3, 23, 31, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String("***", 90, 31, 0, 0, 1) FCD_Custom0_LCD_Print_String("***", 3, 90, 31, 0, 0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCD_Print_String(VREG_SET_TOT, 67, 40, 2, 0, 1) FCD_Custom0_LCD_Print_String(FCV_VREG_SET_TOT, FCSZ_VREG_SET_TOT, 67, 40, 2, 0, 1); // } else { } } } } } } } } //Connection Point //Connection Point: [A]: A FCC_VREG_MENU_A: ; //Calculation //Calculation: // RS232_Data_RX = 0 FCV_RS232_DATA_RX = 0; //Call Macro //Call Macro: DrawHomescreen1() FCM_DrawHomescreen1(); } void main() { //Initialisatie adcon1 = 0x0F; RS232_2_UART_Init( ); //Call initialise function //Interrupt-initialisatiecode //Interrupt //Interrupt: Enable RXINT st_bit(intcon, GIE); st_bit(intcon, PEIE); st_bit(pie1, RC1IE); //Call Macro //Call Macro: DrawHomescreen1() FCM_DrawHomescreen1(); //Calculation //Calculation: // VOLT_DISP = 1 // CURR_DISP = 0 FCV_VOLT_DISP = 1; FCV_CURR_DISP = 0; //Lus //Lus: While 1 while (1) { //Commentaar: //Left-Halfe Display //Call Macro //Call Macro: VoltageReg_5VEN() FCM_VoltageReg_5VEN(); //Call Macro //Call Macro: BUS_Voltage() FCM_BUS_Voltage(); //Schakelaar //Schakelaar : RS232_Data_RX? switch (FCV_RS232_DATA_RX) { case 1: { //Call Macro //Call Macro: VREG_5V() FCM_VREG_5V(); break; } case 2: { //Call Macro //Call Macro: CURRENT_5V() FCM_CURRENT_5V(); break; } case 3: { //Call Macro //Call Macro: VREG_33V() FCM_VREG_33V(); break; } case 4: { break; } case 5: { break; } // default: } //Schakelaar //Schakelaar : RS232_Data_RX? switch (FCV_RS232_DATA_RX) { case 10: { //Call Macro //Call Macro: VREG_MENU() FCM_VREG_MENU(); break; } case 11: { break; } case 12: { break; } case 13: { break; } case 14: { break; } case 15: { break; } // default: } } mainendloop: goto mainendloop; } void MX_INTERRUPT_MACRO(void) { //Handler code for [RXINT] #ifndef MX_INTHANDLER_pir1_RC1IF #define MX_INTHANDLER_pir1_RC1IF if (ts_bit(pir1, RC1IF) && ts_bit(pie1, RC1IE)) { #ifdef USE_FLOWCODE_ICD extern char ICD_Interrupt_Enable = 1; #endif FCM_DATA_RS232(); cr_bit(pir1, RC1IF); #ifdef USE_FLOWCODE_ICD extern char ICD_Interrupt_Enable = 0; #endif } #else #warning "This interrupt has previously been enabled, so the macro may never get called." #endif }