//************************************************************************************ //** //** File name: C:\Documents and Settings\Dan\Desktop\Updated FCD files\Flowcodedebug.c //** Generated by: Flowcode v4.2.3.58 //** Date: Monday, March 08, 2010 09:29:47 //** Licence: Professional //** Registered to: Daniel Kehoe //** //** //** http://www.matrixmultimedia.com //************************************************************************************ #define MX_PIC //Defines for microcontroller #define P16F722 #define MX_SPI #define MX_SPI_C #define MX_SPI_SDI 4 #define MX_SPI_SDO 5 #define MX_SPI_SCK 3 #define MX_UART #define MX_UART_C #define MX_UART_TX 6 #define MX_UART_RX 7 #define MX_I2C #define MX_MI2C #define MX_I2C_C #define MX_I2C_SDA 4 #define MX_I2C_SCL 3 #define MX_PWM #define MX_PWM_CNT 2 #define MX_PWM_TRIS1 trisc #define MX_PWM_1 2 #define MX_PWM_TRIS2 trisc #define MX_PWM_2 1 #define MX_PWM_TRIS2a trisb #define MX_PWM_2a 3 //Functions #define MX_CLK_SPEED 16000000 #ifdef _BOOSTC #include #endif #ifdef HI_TECH_C #include #endif //Configuration data #ifdef _BOOSTC #pragma DATA 0x2007, 0x3cd4 #endif #ifdef HI_TECH_C __CONFIG(0x3cd4); #endif #ifdef _BOOSTC #pragma DATA 0x2008, 0x30 #endif #ifdef HI_TECH_C __CONFIG(0x30); #endif //Internal functions #include "C:\Program Files\Matrix Multimedia\Flowcode V4\FCD\internals.h" //Macro function declarations //Variable declarations char FCV_PWRLED; short FCV_DEGC; short FCV_T1; //Defines: /**** Macro Substitutions **** 0 = Which ADC Channel 0 = Acquisition time 0 = Conversion Speed 0 = VRef+ Option 500 = VRef Voltage x 0.01V ******************************/ //ADC0: //Macro function declarations void FCD_ADC0_SampleADC(); char FCD_ADC0_ReadAsByte(); short FCD_ADC0_ReadAsInt(); float FCD_ADC0_ReadAsVoltage(); void FCD_ADC0_ReadAsString(char* FCR_RETVAL, char FCR_RETVAL_SIZE); //Defines: /**** Macro Substitutions **** 180 = Timer 2 Rollover Value 0x04 = Timer 2 Prescaler Value %c = Unused 0 = Alternate Pin FCD_PWM0_Enable ******************************/ //PWM0: //Macro function declarations void FCD_PWM0_Enable(char nIdx); void FCD_PWM0_Disable(char nIdx); void FCD_PWM0_SetDutyCycle(char nIdx, char nDuty); void FCD_PWM0_ChangePeriod(char nPeriodVal, char nPrescalerVal); void FCD_PWM0_SetDutyCycle10bit(char nIdx, short nDuty); //Defines: /**** Macro Substitutions **** portb = D1 Port trisb = D1 Data Direction portb = D2 Port trisb = D2 Data Direction portb = D3 Port trisb = D3 Data Direction portb = D4 Port trisb = D4 Data Direction portb = RS Port trisb = RS Data Direction portb = E Port trisb = E Data Direction 0 = Data 1_Pin 1 = Data 2 Pin 2 = Data 3 Pin 3 = Data 4 Pin 4 = RS Pin 5 = Enable Pin LCD_263158 = Unique Component Reference Number 2 = Row Count 16 = Column Count ******************************/ //component connections #define LCD_263158_PORT0 portb #define LCD_263158_TRIS0 trisb #define LCD_263158_PORT1 portb #define LCD_263158_TRIS1 trisb #define LCD_263158_PORT2 portb #define LCD_263158_TRIS2 trisb #define LCD_263158_PORT3 portb #define LCD_263158_TRIS3 trisb #define LCD_263158_PORT4 portb #define LCD_263158_TRIS4 trisb #define LCD_263158_PORT5 portb #define LCD_263158_TRIS5 trisb #define LCD_263158_BIT0 0 #define LCD_263158_BIT1 1 #define LCD_263158_BIT2 2 #define LCD_263158_BIT3 3 #define LCD_263158_RS 4 #define LCD_263158_E 5 #define LCD_263158_ROWCNT 2 #define LCD_263158_COLCNT 16 #ifdef _BOOSTC #define LCD_263158_DELAY delay_10us(10) #endif #ifdef _C2C_ #define LCD_263158_DELAY delay_us(100) #endif #ifdef HI_TECH_C #define LCD_263158_DELAY __delay_us(120) #endif #ifndef LCD_263158_DELAY #define LCD_263158_DELAY delay_us(100) #endif //LCDDisplay0: //Macro function declarations void FCD_LCDDisplay0_RawSend(char in, char mask); void FCD_LCDDisplay0_Start(); void FCD_LCDDisplay0_Clear(); void FCD_LCDDisplay0_PrintASCII(char Character); void FCD_LCDDisplay0_Command(char in); void FCD_LCDDisplay0_Cursor(char x, char y); void FCD_LCDDisplay0_PrintNumber(short Number); void FCD_LCDDisplay0_PrintString(char* String, char MSZ_String); void FCD_LCDDisplay0_ScrollDisplay(char Direction, char Num_Positions); void FCD_LCDDisplay0_ClearLine(char Line); void FCD_LCDDisplay0_RAM_Write(char nIdx, char d0, char d1, char d2, char d3, char d4, char d5, char d6, char d7); //ADC0: //Macro implementations void FCD_ADC0_SampleADC() { /*******Supported Devices****************************************************************** // 16C72, 16C72A, 16CR72, 16F72, 16C73, 16C73A, 16C73B, 16F73, 16C74, 16C74A, 16C74B, 16F74, // 16C76, 16F76, 16C77, 16F77, 16C716, 16F716 ******************************************************************************************/ //HI #define MX_ADC_CHANNEL 0 #define MX_ADC_SAMP_TIME 0 #define MX_ADC_CONV_SP 0 #define MX_ADC_VREF_OPT 0 //set up ADC conversion char old_tris, cnt; //find appropriate bit #if (MX_ADC_CHANNEL == 0) #define MX_ADC_TRIS_MSK 0x01 #define MX_ADC_TRIS_REG trisa adcon1 = 0x04; #endif #if (MX_ADC_CHANNEL == 1) #define MX_ADC_TRIS_MSK 0x02 #define MX_ADC_TRIS_REG trisa adcon1 = 0x04; #endif #if (MX_ADC_CHANNEL == 2) #define MX_ADC_TRIS_MSK 0x04 #define MX_ADC_TRIS_REG trisa adcon1 = 0x00; #endif #if (MX_ADC_CHANNEL == 3) #define MX_ADC_TRIS_MSK 0x08 #define MX_ADC_TRIS_REG trisa adcon1 = 0x04; #if (MX_ADC_VREF_OPT != 0) #pragma error "Target device is currently using AN3 for VREF+" #endif #endif #if (MX_ADC_CHANNEL == 4) #define MX_ADC_TRIS_MSK 0x20 #define MX_ADC_TRIS_REG trisa adcon1 = 0x00; #endif #if (MX_ADC_CHANNEL == 5) #define MX_ADC_TRIS_MSK 0x01 #define MX_ADC_TRIS_REG trise adcon1 = 0x00; #endif #if (MX_ADC_CHANNEL == 6) #define MX_ADC_TRIS_MSK 0x02 #define MX_ADC_TRIS_REG trise adcon1 = 0x00; #endif #if (MX_ADC_CHANNEL == 7) #define MX_ADC_TRIS_MSK 0x04 #define MX_ADC_TRIS_REG trise adcon1 = 0x00; #endif //sanity check #ifndef MX_ADC_TRIS_MSK #pragma error "ADC Type 6 conversion code error - please contact technical support" #endif //assign VREF functionality #if (MX_ADC_VREF_OPT != 0) adcon1 = adcon1 + 1; #endif //store old tris value, and set the i/o pin as an input old_tris = MX_ADC_TRIS_REG; MX_ADC_TRIS_REG = MX_ADC_TRIS_REG | MX_ADC_TRIS_MSK; //turn ADC on adcon0 = (0x01 | (MX_ADC_CONV_SP << 6)) | (MX_ADC_CHANNEL << 3); //wait the acquisition time cnt = 0; while (cnt < MX_ADC_SAMP_TIME) cnt++; //begin conversion and wait until it has finished adcon0 = adcon0 | 0x04; while (adcon0 & 0x04); //restore old tris value, and reset adc registers MX_ADC_TRIS_REG = old_tris; adcon1 = 0x07; adcon0 = 0x00; #undef MX_ADC_TRIS_REG #undef MX_ADC_TRIS_MSK #undef MX_ADC_SAMP_TIME #undef MX_ADC_CHANNEL #undef MX_ADC_CONV_SP #undef MX_ADC_VREF_OPT } char FCD_ADC0_ReadAsByte() { FCD_ADC0_SampleADC(); return adres; } short FCD_ADC0_ReadAsInt() { short iRetVal; FCD_ADC0_SampleADC(); iRetVal = (adres << 2); return (iRetVal); } float FCD_ADC0_ReadAsVoltage() { int iSample; float fSample, fVoltage, fVperDiv; #define MX_ADC_VREF_V 500 iSample = FCD_ADC0_ReadAsInt(); //Read as 10-bit Integer #ifdef _BOOSTC fVoltage = float32_from_int32(MX_ADC_VREF_V); //Convert reference voltage count to floating point (0 - 500 x 10mV) fVoltage = float32_mul(fVoltage, 0.01); //Convert reference voltage count to actual voltage (0 - 5) fVperDiv = float32_mul(fVoltage, 0.000976); //Convert actual voltage to voltage per division (VRef / 1024) fSample = float32_from_int32(iSample); //Convert to floating point variable fVoltage = float32_mul(fSample, fVperDiv); //Calculate floating point voltage #endif #ifdef HI_TECH_C fVoltage = MX_ADC_VREF_V; //Convert reference voltage count to floating point (0 - 500 x 10mV) fVoltage = fVoltage * 0.01; //Convert reference voltage count to actual voltage (0 - 5) fVperDiv = fVoltage * 0.000976; //Convert actual voltage to voltage per division (VRef / 1024) fSample = iSample; //Convert to floating point variable fVoltage = fSample * fVperDiv; //Calculate floating point voltage #endif #undef MX_ADC_VREF_V return (fVoltage); } void FCD_ADC0_ReadAsString(char* FCR_RETVAL, char FCR_RETVAL_SIZE) { float fVoltage; fVoltage = FCD_ADC0_ReadAsVoltage(); FCI_FLOAT_TO_STRING(fVoltage, 2, FCR_RETVAL, FCR_RETVAL_SIZE); //Convert to String } //PWM0: //Macro implementations void FCD_PWM0_Enable(char nIdx) { //error checking #ifndef MX_PWM #warning "This chip does not have PWM capability" #else #ifndef MX_PWM_CNT #pragma error FCD file error (no MX_PWM_CNT) #endif #if (MX_PWM_CNT < 1) #pragma error FCD file error (MX_PWM_CNT < 1) #endif #if (MX_PWM_CNT > 2) #pragma error FCD file error (MX_PWM_CNT > 2) #endif #ifndef MX_PWM_TRIS1 #pragma error FCD file error (no MX_PWM_TRIS1) #endif #ifndef MX_PWM_1 #pragma error FCD file error (no MX_PWM_1) #endif #if (MX_PWM_CNT == 2) #ifndef MX_PWM_TRIS2 #pragma error FCD file error (no MX_PWM_TRIS2) #endif #ifndef MX_PWM_2 #pragma error FCD file error (no MX_PWM_2) #endif #endif #if (0 == 1) #ifndef MX_PWM_TRIS1a #pragma error PWM component error (using alternative, but no MX_PWM_TRIS1a) #define MX_PWM_ALT_ERROR #endif #ifndef MX_PWM_1a #pragma error PWM component error (using alternative, but no MX_PWM_1a) #define MX_PWM_ALT_ERROR #endif #endif #if (0 == 2) #ifndef MX_PWM_TRIS2a #pragma error PWM component error (using alternative, but no MX_PWM_TRIS2a) #define MX_PWM_ALT_ERROR #endif #ifndef MX_PWM_2a #pragma error PWM component error (using alternative, but no MX_PWM_2a) #define MX_PWM_ALT_ERROR #endif #endif #endif #ifdef MX_PWM pr2 = 180; t2con = 0x04; #if (MX_PWM_CNT >= 1) if (nIdx == 1) { ccp1con = 0x0C; #if (0 == 1) #ifndef MX_PWM_ALT_ERROR clear_bit(MX_PWM_TRIS1a, MX_PWM_1a); #endif #else clear_bit(MX_PWM_TRIS1, MX_PWM_1); #endif } #endif #if (MX_PWM_CNT >= 2) if (nIdx == 2) { ccp2con = 0x0C; #if (0 == 2) #ifndef MX_PWM_ALT_ERROR clear_bit(MX_PWM_TRIS2a, MX_PWM_2a); #endif #else clear_bit(MX_PWM_TRIS2, MX_PWM_2); #endif } #endif #endif #ifdef MX_PWM_ALT_ERROR #undef MX_PWM_ALT_ERROR #endif } void FCD_PWM0_Disable(char nIdx) { //error checking #ifndef MX_PWM #warning "This chip does not have PWM capability" #endif #ifdef MX_PWM #if (MX_PWM_CNT >= 1) if (nIdx == 1) { ccp1con = 0x00; } #endif #if (MX_PWM_CNT >= 2) if (nIdx == 2) { ccp2con = 0x00; } #endif #endif } void FCD_PWM0_SetDutyCycle(char nIdx, char nDuty) { //error checking #ifndef MX_PWM #warning "This chip does not have PWM capability" #endif #ifdef MX_PWM #if (MX_PWM_CNT >= 1) if (nIdx == 1) { ccpr1l = nDuty; } #endif #if (MX_PWM_CNT >= 2) if (nIdx == 2) { ccpr2l = nDuty; } #endif #endif } void FCD_PWM0_ChangePeriod(char nPeriodVal, char nPrescalerVal) { //error checking #ifndef MX_PWM #warning "This chip does not have PWM capability" #endif #ifdef MX_PWM pr2 = nPeriodVal; switch (nPrescalerVal) { case 1: t2con = 0x04; break; case 4: t2con = 0x05; break; case 16: t2con = 0x06; break; } #endif } void FCD_PWM0_SetDutyCycle10bit(char nIdx, short nDuty) { char nCCPxCONtemp; //error checking #ifndef MX_PWM #warning "This chip does not have PWM capability" #endif #ifdef MX_PWM #if (MX_PWM_CNT >= 1) if (nIdx == 1) { ccpr1l = (nDuty & 0x3FC) >> 2; nDuty = (nDuty & 0x03) << 4; nCCPxCONtemp = (ccp1con & 0xCF) | nDuty; ccp1con = nCCPxCONtemp; } #endif #if (MX_PWM_CNT >= 2) if (nIdx == 2) { ccpr2l = (nDuty & 0x3FC) >> 2; nDuty = (nDuty & 0x03) << 4; nCCPxCONtemp = (ccp2con & 0xCF) | nDuty; ccp2con = nCCPxCONtemp; } #endif #endif } //LCDDisplay0: //Macro implementations void FCD_LCDDisplay0_RawSend(char in, char mask) { unsigned char pt; clear_bit(LCD_263158_PORT0, LCD_263158_BIT0); clear_bit(LCD_263158_PORT1, LCD_263158_BIT1); clear_bit(LCD_263158_PORT2, LCD_263158_BIT2); clear_bit(LCD_263158_PORT3, LCD_263158_BIT3); clear_bit(LCD_263158_PORT4, LCD_263158_RS); clear_bit(LCD_263158_PORT5, LCD_263158_E); pt = ((in >> 4) & 0x0f); if (pt & 0x01) set_bit(LCD_263158_PORT0, LCD_263158_BIT0); if (pt & 0x02) set_bit(LCD_263158_PORT1, LCD_263158_BIT1); if (pt & 0x04) set_bit(LCD_263158_PORT2, LCD_263158_BIT2); if (pt & 0x08) set_bit(LCD_263158_PORT3, LCD_263158_BIT3); if (mask) set_bit(LCD_263158_PORT4, LCD_263158_RS); LCD_263158_DELAY; set_bit (LCD_263158_PORT5, LCD_263158_E); LCD_263158_DELAY; clear_bit (LCD_263158_PORT5, LCD_263158_E); pt = (in & 0x0f); LCD_263158_DELAY; clear_bit(LCD_263158_PORT0, LCD_263158_BIT0); clear_bit(LCD_263158_PORT1, LCD_263158_BIT1); clear_bit(LCD_263158_PORT2, LCD_263158_BIT2); clear_bit(LCD_263158_PORT3, LCD_263158_BIT3); clear_bit(LCD_263158_PORT4, LCD_263158_RS); clear_bit(LCD_263158_PORT5, LCD_263158_E); if (pt & 0x01) set_bit(LCD_263158_PORT0, LCD_263158_BIT0); if (pt & 0x02) set_bit(LCD_263158_PORT1, LCD_263158_BIT1); if (pt & 0x04) set_bit(LCD_263158_PORT2, LCD_263158_BIT2); if (pt & 0x08) set_bit(LCD_263158_PORT3, LCD_263158_BIT3); if (mask) set_bit(LCD_263158_PORT4, LCD_263158_RS); LCD_263158_DELAY; set_bit (LCD_263158_PORT5, LCD_263158_E); LCD_263158_DELAY; clear_bit (LCD_263158_PORT5, LCD_263158_E); LCD_263158_DELAY; } void FCD_LCDDisplay0_Start() { clear_bit(LCD_263158_TRIS0, LCD_263158_BIT0); clear_bit(LCD_263158_TRIS1, LCD_263158_BIT1); clear_bit(LCD_263158_TRIS2, LCD_263158_BIT2); clear_bit(LCD_263158_TRIS3, LCD_263158_BIT3); clear_bit(LCD_263158_TRIS4, LCD_263158_RS); clear_bit(LCD_263158_TRIS5, LCD_263158_E); Wdt_Delay_Ms(12); FCD_LCDDisplay0_RawSend(0x33, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x33, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x32, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x2c, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x06, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x0c, 0); Wdt_Delay_Ms(2); //clear the display FCD_LCDDisplay0_RawSend(0x01, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x02, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_Clear() { FCD_LCDDisplay0_RawSend(0x01, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x02, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_PrintASCII(char Character) { FCD_LCDDisplay0_RawSend(Character, 0x10); } void FCD_LCDDisplay0_Command(char in) { FCD_LCDDisplay0_RawSend(in, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_Cursor(char x, char y) { #if (LCD_263158_ROWCNT == 1) y=0x80; #endif #if (LCD_263158_ROWCNT == 2) if (y==0) y=0x80; else y=0xc0; #endif #if (LCD_263158_ROWCNT == 4) if (y==0) y=0x80; else if (y==1) y=0xc0; #if (LCD_263158_COLCNT == 16) else if (y==2) y=0x90; else y=0xd0; #endif #if (LCD_263158_COLCNT == 20) else if (y==2) y=0x94; else y=0xd4; #endif #endif FCD_LCDDisplay0_RawSend(y+x, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_PrintNumber(short Number) { short tmp_int; char tmp_byte; if (Number < 0) { FCD_LCDDisplay0_RawSend('-', 0x10); Number = 0 - Number; } tmp_int = Number; if (Number >= 10000) { tmp_byte = tmp_int / 10000; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 10000; tmp_byte--; } } if (Number >= 1000) { tmp_byte = tmp_int / 1000; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 1000; tmp_byte--; } } if (Number >= 100) { tmp_byte = tmp_int / 100; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 100; tmp_byte--; } } if (Number >= 10) { tmp_byte = tmp_int / 10; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 10; tmp_byte--; } } FCD_LCDDisplay0_RawSend('0' + tmp_int, 0x10); } void FCD_LCDDisplay0_PrintString(char* String, char MSZ_String) { char idx = 0; for (idx=0; idx C3 trisc = trisc & 0xf7; if (1) portc = (portc & 0xf7) | 0x08; else portc = portc & 0xf7; //Call Component Macro //Call Component Macro: LCDDisplay(0)::Clear FCD_LCDDisplay0_Clear(); //Call Component Macro //Call Component Macro: LCDDisplay(0)::PrintNumber(degc) FCD_LCDDisplay0_PrintNumber(FCV_DEGC); //Call Component Macro //Call Component Macro: LCDDisplay(0)::Cursor(0, 1) FCD_LCDDisplay0_Cursor(0, 1); //Call Component Macro //Call Component Macro: LCDDisplay(0)::PrintString("TEC=MAX/FAN=MAX") FCD_LCDDisplay0_PrintString("TEC=MAX/FAN=MAX",15); } else { //Decision //Decision: degc<250? if (FCV_DEGC<250) { //Call Component Macro //Call Component Macro: PWM(0)::SetDutyCycle(1, 181) FCD_PWM0_SetDutyCycle(1, 181); //Call Component Macro //Call Component Macro: PWM(0)::SetDutyCycle(2, 71) FCD_PWM0_SetDutyCycle(2, 71); //Output //Output: 1 -> C3 trisc = trisc & 0xf7; if (1) portc = (portc & 0xf7) | 0x08; else portc = portc & 0xf7; //Call Component Macro //Call Component Macro: LCDDisplay(0)::Clear FCD_LCDDisplay0_Clear(); //Call Component Macro //Call Component Macro: LCDDisplay(0)::PrintNumber(degc) FCD_LCDDisplay0_PrintNumber(FCV_DEGC); //Call Component Macro //Call Component Macro: LCDDisplay(0)::Cursor(0, 1) FCD_LCDDisplay0_Cursor(0, 1); //Call Component Macro //Call Component Macro: LCDDisplay(0)::PrintString("TEC=MAX/FAN=LOW") FCD_LCDDisplay0_PrintString("TEC=MAX/FAN=LOW",15); } else { //Decision //Decision: degc>253? if (FCV_DEGC>253) { //Call Component Macro //Call Component Macro: PWM(0)::SetDutyCycle(2, 0) FCD_PWM0_SetDutyCycle(2, 0); //Call Component Macro //Call Component Macro: PWM(0)::SetDutyCycle(1, 0) FCD_PWM0_SetDutyCycle(1, 0); //Delay //Delay: 250 ms delay_ms(250); //Decision //Decision: pwrled=0? if (FCV_PWRLED==0) { //Output //Output: 0 -> C3 trisc = trisc & 0xf7; if (0) portc = (portc & 0xf7) | 0x08; else portc = portc & 0xf7; //Calculation //Calculation: // pwrled = 1 FCV_PWRLED = 1; } else { //Output //Output: 1 -> C3 trisc = trisc & 0xf7; if (1) portc = (portc & 0xf7) | 0x08; else portc = portc & 0xf7; //Calculation //Calculation: // pwrled = 0 FCV_PWRLED = 0; } //Call Component Macro //Call Component Macro: LCDDisplay(0)::Clear FCD_LCDDisplay0_Clear(); //Call Component Macro //Call Component Macro: LCDDisplay(0)::PrintNumber(degc) FCD_LCDDisplay0_PrintNumber(FCV_DEGC); //Call Component Macro //Call Component Macro: LCDDisplay(0)::Cursor(0, 1) FCD_LCDDisplay0_Cursor(0, 1); //Call Component Macro //Call Component Macro: LCDDisplay(0)::PrintString("TEC=OFF/FAN=OFF") FCD_LCDDisplay0_PrintString("TEC=OFF/FAN=OFF",15); } } } //Delay //Delay: 250 ms delay_ms(250); } mainendloop: goto mainendloop; } void MX_INTERRUPT_MACRO(void) { }