//************************************************************************************ //** //** Source name: C:\Users\Lord-Thoth\Dropbox\LN\Arduino Mikrocontroller\Flowcode3.fcfx //** Title: //** Description: //** Device: AVR.ATMEGA.ATMEGA328P //** //** Generated by: Flowcode v7.1.1.0 //** Date: Sunday, January 29, 2017 11:45:34 //** Users: 1 //** Registered to: //** Licence key: ***** //** //** NICHT FÜR KOMMERZiELLE ANWENDUNGEN //** //** http://www.matrixtsl.com //** //************************************************************************************ #define MX_AVR #define MX_CAL_AVR #define MX_CLK_SPEED 16000000 #define FCP_NULL Unconnected_Port #define MX_UART_ID #define MX_UART_UCSRC #include #include #include #include #include #include #include /*========================================================================*\ Use :Mit Typdefinitionen \*========================================================================*/ #include "C:\Program Files (x86)\Flowcode 7\CAL\internals.c" /*========================================================================*\ Use :panel :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCV_FALSE (0) #define FCV_TRUE (1) /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d910_led_base__TurnOn(); void FCD_03d910_led_base__TurnOff(); /*========================================================================*\ Use :led16 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e110_led16__TurnOn FCD_03d910_led_base__TurnOn #define FCD_02e110_led16__TurnOff FCD_03d910_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d9f_led_base__TurnOn(); void FCD_03d9f_led_base__TurnOff(); /*========================================================================*\ Use :led15 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e1f_led15__TurnOn FCD_03d9f_led_base__TurnOn #define FCD_02e1f_led15__TurnOff FCD_03d9f_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d9e_led_base__TurnOn(); void FCD_03d9e_led_base__TurnOff(); /*========================================================================*\ Use :led14 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e1e_led14__TurnOn FCD_03d9e_led_base__TurnOn #define FCD_02e1e_led14__TurnOff FCD_03d9e_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d9d_led_base__TurnOn(); void FCD_03d9d_led_base__TurnOff(); /*========================================================================*\ Use :led13 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e1d_led13__TurnOn FCD_03d9d_led_base__TurnOn #define FCD_02e1d_led13__TurnOff FCD_03d9d_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d9c_led_base__TurnOn(); void FCD_03d9c_led_base__TurnOff(); /*========================================================================*\ Use :led12 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e1c_led12__TurnOn FCD_03d9c_led_base__TurnOn #define FCD_02e1c_led12__TurnOff FCD_03d9c_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d9b_led_base__TurnOn(); void FCD_03d9b_led_base__TurnOff(); /*========================================================================*\ Use :led11 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e1b_led11__TurnOn FCD_03d9b_led_base__TurnOn #define FCD_02e1b_led11__TurnOff FCD_03d9b_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d9a_led_base__TurnOn(); void FCD_03d9a_led_base__TurnOff(); /*========================================================================*\ Use :led10 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e1a_led10__TurnOn FCD_03d9a_led_base__TurnOn #define FCD_02e1a_led10__TurnOff FCD_03d9a_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d99_led_base__TurnOn(); void FCD_03d99_led_base__TurnOff(); /*========================================================================*\ Use :led9 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e19_led9__TurnOn FCD_03d99_led_base__TurnOn #define FCD_02e19_led9__TurnOff FCD_03d99_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d98_led_base__TurnOn(); void FCD_03d98_led_base__TurnOff(); /*========================================================================*\ Use :led8 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e18_led8__TurnOn FCD_03d98_led_base__TurnOn #define FCD_02e18_led8__TurnOff FCD_03d98_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d97_led_base__TurnOn(); void FCD_03d97_led_base__TurnOff(); /*========================================================================*\ Use :led7 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e17_led7__TurnOn FCD_03d97_led_base__TurnOn #define FCD_02e17_led7__TurnOff FCD_03d97_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d96_led_base__TurnOn(); void FCD_03d96_led_base__TurnOff(); /*========================================================================*\ Use :led6 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e16_led6__TurnOn FCD_03d96_led_base__TurnOn #define FCD_02e16_led6__TurnOff FCD_03d96_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d95_led_base__TurnOn(); void FCD_03d95_led_base__TurnOff(); /*========================================================================*\ Use :led5 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e15_led5__TurnOn FCD_03d95_led_base__TurnOn #define FCD_02e15_led5__TurnOff FCD_03d95_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d94_led_base__TurnOn(); void FCD_03d94_led_base__TurnOff(); /*========================================================================*\ Use :led4 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e14_led4__TurnOn FCD_03d94_led_base__TurnOn #define FCD_02e14_led4__TurnOff FCD_03d94_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d93_led_base__TurnOn(); void FCD_03d93_led_base__TurnOff(); /*========================================================================*\ Use :led3 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e13_led3__TurnOn FCD_03d93_led_base__TurnOn #define FCD_02e13_led3__TurnOff FCD_03d93_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d92_led_base__TurnOn(); void FCD_03d92_led_base__TurnOff(); /*========================================================================*\ Use :led2 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e12_led2__TurnOn FCD_03d92_led_base__TurnOn #define FCD_02e12_led2__TurnOff FCD_03d92_led_base__TurnOff /*========================================================================*\ Use :component_label1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :led_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_03d91_led_base__TurnOn(); void FCD_03d91_led_base__TurnOff(); /*========================================================================*\ Use :led1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_02e11_led1__TurnOn FCD_03d91_led_base__TurnOn #define FCD_02e11_led1__TurnOff FCD_03d91_led_base__TurnOff /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_052612_switch_base__ReadState(); void FCD_052612_switch_base__WaitUntilHigh(); void FCD_052612_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw16 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_088310_sw16__ReadState FCD_052612_switch_base__ReadState #define FCD_088310_sw16__WaitUntilHigh FCD_052612_switch_base__WaitUntilHigh #define FCD_088310_sw16__WaitUntilLow FCD_052612_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_052611_switch_base__ReadState(); void FCD_052611_switch_base__WaitUntilHigh(); void FCD_052611_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw15 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_0883f_sw15__ReadState FCD_052611_switch_base__ReadState #define FCD_0883f_sw15__WaitUntilHigh FCD_052611_switch_base__WaitUntilHigh #define FCD_0883f_sw15__WaitUntilLow FCD_052611_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_052610_switch_base__ReadState(); void FCD_052610_switch_base__WaitUntilHigh(); void FCD_052610_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw14 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_0883e_sw14__ReadState FCD_052610_switch_base__ReadState #define FCD_0883e_sw14__WaitUntilHigh FCD_052610_switch_base__WaitUntilHigh #define FCD_0883e_sw14__WaitUntilLow FCD_052610_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_0526f_switch_base__ReadState(); void FCD_0526f_switch_base__WaitUntilHigh(); void FCD_0526f_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw13 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_0883d_sw13__ReadState FCD_0526f_switch_base__ReadState #define FCD_0883d_sw13__WaitUntilHigh FCD_0526f_switch_base__WaitUntilHigh #define FCD_0883d_sw13__WaitUntilLow FCD_0526f_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_0526e_switch_base__ReadState(); void FCD_0526e_switch_base__WaitUntilHigh(); void FCD_0526e_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw12 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_0883c_sw12__ReadState FCD_0526e_switch_base__ReadState #define FCD_0883c_sw12__WaitUntilHigh FCD_0526e_switch_base__WaitUntilHigh #define FCD_0883c_sw12__WaitUntilLow FCD_0526e_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_0526d_switch_base__ReadState(); void FCD_0526d_switch_base__WaitUntilHigh(); void FCD_0526d_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw11 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_0883b_sw11__ReadState FCD_0526d_switch_base__ReadState #define FCD_0883b_sw11__WaitUntilHigh FCD_0526d_switch_base__WaitUntilHigh #define FCD_0883b_sw11__WaitUntilLow FCD_0526d_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_0526c_switch_base__ReadState(); void FCD_0526c_switch_base__WaitUntilHigh(); void FCD_0526c_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw10 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_0883a_sw10__ReadState FCD_0526c_switch_base__ReadState #define FCD_0883a_sw10__WaitUntilHigh FCD_0526c_switch_base__WaitUntilHigh #define FCD_0883a_sw10__WaitUntilLow FCD_0526c_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_0526b_switch_base__ReadState(); void FCD_0526b_switch_base__WaitUntilHigh(); void FCD_0526b_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw9 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08839_sw9__ReadState FCD_0526b_switch_base__ReadState #define FCD_08839_sw9__WaitUntilHigh FCD_0526b_switch_base__WaitUntilHigh #define FCD_08839_sw9__WaitUntilLow FCD_0526b_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_0526a_switch_base__ReadState(); void FCD_0526a_switch_base__WaitUntilHigh(); void FCD_0526a_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw8 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08838_sw8__ReadState FCD_0526a_switch_base__ReadState #define FCD_08838_sw8__WaitUntilHigh FCD_0526a_switch_base__WaitUntilHigh #define FCD_08838_sw8__WaitUntilLow FCD_0526a_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05269_switch_base__ReadState(); void FCD_05269_switch_base__WaitUntilHigh(); void FCD_05269_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw7 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08837_sw7__ReadState FCD_05269_switch_base__ReadState #define FCD_08837_sw7__WaitUntilHigh FCD_05269_switch_base__WaitUntilHigh #define FCD_08837_sw7__WaitUntilLow FCD_05269_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05268_switch_base__ReadState(); void FCD_05268_switch_base__WaitUntilHigh(); void FCD_05268_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw6 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08836_sw6__ReadState FCD_05268_switch_base__ReadState #define FCD_08836_sw6__WaitUntilHigh FCD_05268_switch_base__WaitUntilHigh #define FCD_08836_sw6__WaitUntilLow FCD_05268_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05267_switch_base__ReadState(); void FCD_05267_switch_base__WaitUntilHigh(); void FCD_05267_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw5 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08835_sw5__ReadState FCD_05267_switch_base__ReadState #define FCD_08835_sw5__WaitUntilHigh FCD_05267_switch_base__WaitUntilHigh #define FCD_08835_sw5__WaitUntilLow FCD_05267_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05266_switch_base__ReadState(); void FCD_05266_switch_base__WaitUntilHigh(); void FCD_05266_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw4 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08834_sw4__ReadState FCD_05266_switch_base__ReadState #define FCD_08834_sw4__WaitUntilHigh FCD_05266_switch_base__WaitUntilHigh #define FCD_08834_sw4__WaitUntilLow FCD_05266_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05265_switch_base__ReadState(); void FCD_05265_switch_base__WaitUntilHigh(); void FCD_05265_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw3 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08833_sw3__ReadState FCD_05265_switch_base__ReadState #define FCD_08833_sw3__WaitUntilHigh FCD_05265_switch_base__WaitUntilHigh #define FCD_08833_sw3__WaitUntilLow FCD_05265_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05264_switch_base__ReadState(); void FCD_05264_switch_base__WaitUntilHigh(); void FCD_05264_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw2 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08832_sw2__ReadState FCD_05264_switch_base__ReadState #define FCD_08832_sw2__WaitUntilHigh FCD_05264_switch_base__WaitUntilHigh #define FCD_08832_sw2__WaitUntilLow FCD_05264_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05263_switch_base__ReadState(); void FCD_05263_switch_base__WaitUntilHigh(); void FCD_05263_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_08831_sw1__ReadState FCD_05263_switch_base__ReadState #define FCD_08831_sw1__WaitUntilHigh FCD_05263_switch_base__WaitUntilHigh #define FCD_08831_sw1__WaitUntilLow FCD_05263_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05262_switch_base__ReadState(); void FCD_05262_switch_base__WaitUntilHigh(); void FCD_05262_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw_slide_sub_pcb1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_06fb2_sw_slide_sub_pcb1__ReadState FCD_05262_switch_base__ReadState #define FCD_06fb2_sw_slide_sub_pcb1__WaitUntilHigh FCD_05262_switch_base__WaitUntilHigh #define FCD_06fb2_sw_slide_sub_pcb1__WaitUntilLow FCD_05262_switch_base__WaitUntilLow /*========================================================================*\ Use :ButtonCtrl :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :switch_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT8 FCD_05261_switch_base__ReadState(); void FCD_05261_switch_base__WaitUntilHigh(); void FCD_05261_switch_base__WaitUntilLow(); /*========================================================================*\ Use :sw_slide_sub_pcb :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_06fb1_sw_slide_sub_pcb__ReadState FCD_05261_switch_base__ReadState #define FCD_06fb1_sw_slide_sub_pcb__WaitUntilHigh FCD_05261_switch_base__WaitUntilHigh #define FCD_06fb1_sw_slide_sub_pcb__WaitUntilLow FCD_05261_switch_base__WaitUntilLow /*========================================================================*\ Use :fcdhelper :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :cal_adc :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define ADC_2_MX_ADC_ACTIME 40 #define MX_ADC_REF #define ADC_2_MX_ADC_VREFVOL 500 #define MX_ADC_CHANNEL_1 #define MX_ADC_TYPE_2 #define ADC_2_MX_ADC_VREFOP 0 #define ADC_2_MX_ADC_CONVSP 3 #define MX_ADC_BITS_10 #define ADC_2_MX_ADC_CHANNEL 1 #define FCV_0aae2_cal_adc__FALSE (0) #define FCV_0aae2_cal_adc__TRUE (1) void FC_CAL_ADC_Disable(); void FC_CAL_ADC_Enable(MX_UINT8 FCL_CHANNEL, MX_UINT8 FCL_CONV_SPEED, MX_UINT8 FCL_VREF, MX_UINT8 FCL_T_CHARGE); MX_UINT16 FC_CAL_ADC_Sample(MX_UINT8 FCL_SAMPLE_MODE); /*========================================================================*\ Use :adc_base :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT16 FCD_08f42_adc_base__RawSampleInt(); MX_UINT8 FCD_08f42_adc_base__RawAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); void FCD_08f42_adc_base__GetString(MX_CHAR *FCR_RETVAL, MX_UINT16 FCRsz_RETVAL); MX_UINT8 FCD_08f42_adc_base__GetAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); MX_SINT16 FCD_08f42_adc_base__RawAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); MX_UINT16 FCD_08f42_adc_base__GetAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); MX_FLOAT FCD_08f42_adc_base__GetVoltage(); void FCD_08f42_adc_base__RawEnable(); MX_UINT8 FCD_08f42_adc_base__RawSampleByte(); MX_UINT16 FCD_08f42_adc_base__GetInt(); void FCD_08f42_adc_base__RawDisable(); MX_UINT8 FCD_08f42_adc_base__GetByte(); /*========================================================================*\ Use :knob_ptr_black :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCD_03521_knob_ptr_black__RawSampleInt FCD_08f42_adc_base__RawSampleInt #define FCD_03521_knob_ptr_black__RawAverageByte FCD_08f42_adc_base__RawAverageByte #define FCD_03521_knob_ptr_black__GetString FCD_08f42_adc_base__GetString #define FCD_03521_knob_ptr_black__GetAverageByte FCD_08f42_adc_base__GetAverageByte #define FCD_03521_knob_ptr_black__RawAverageInt FCD_08f42_adc_base__RawAverageInt #define FCD_03521_knob_ptr_black__GetAverageInt FCD_08f42_adc_base__GetAverageInt #define FCD_03521_knob_ptr_black__GetVoltage FCD_08f42_adc_base__GetVoltage #define FCD_03521_knob_ptr_black__RawEnable FCD_08f42_adc_base__RawEnable #define FCD_03521_knob_ptr_black__RawSampleByte FCD_08f42_adc_base__RawSampleByte #define FCD_03521_knob_ptr_black__GetInt FCD_08f42_adc_base__GetInt #define FCD_03521_knob_ptr_black__RawDisable FCD_08f42_adc_base__RawDisable #define FCD_03521_knob_ptr_black__GetByte FCD_08f42_adc_base__GetByte /*========================================================================*\ Use :fcdhelper :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :cal_adc :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define ADC_1_MX_ADC_ACTIME 40 #define MX_ADC_REF #define ADC_1_MX_ADC_VREFVOL 500 #define MX_ADC_CHANNEL_0 #define MX_ADC_TYPE_2 #define ADC_1_MX_ADC_VREFOP 0 #define ADC_1_MX_ADC_CONVSP 3 #define MX_ADC_BITS_10 #define ADC_1_MX_ADC_CHANNEL 0 #define FCV_0aae1_cal_adc__FALSE (0) #define FCV_0aae1_cal_adc__TRUE (1) void FC_CAL_ADC_Disable(); void FC_CAL_ADC_Enable(MX_UINT8 FCL_CHANNEL, MX_UINT8 FCL_CONV_SPEED, MX_UINT8 FCL_VREF, MX_UINT8 FCL_T_CHARGE); MX_UINT16 FC_CAL_ADC_Sample(MX_UINT8 FCL_SAMPLE_MODE); /*========================================================================*\ Use :adc_base1 :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ MX_UINT16 FCD_08f41_adc_base1__RawSampleInt(); MX_UINT8 FCD_08f41_adc_base1__RawAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); void FCD_08f41_adc_base1__GetString(MX_CHAR *FCR_RETVAL, MX_UINT16 FCRsz_RETVAL); MX_UINT8 FCD_08f41_adc_base1__GetAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); MX_SINT16 FCD_08f41_adc_base1__RawAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); MX_UINT16 FCD_08f41_adc_base1__GetAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS); MX_FLOAT FCD_08f41_adc_base1__GetVoltage(); void FCD_08f41_adc_base1__RawEnable(); MX_UINT8 FCD_08f41_adc_base1__RawSampleByte(); MX_UINT16 FCD_08f41_adc_base1__GetInt(); void FCD_08f41_adc_base1__RawDisable(); MX_UINT8 FCD_08f41_adc_base1__GetByte(); /*========================================================================*\ Use :ctrl_lcd :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :LCD :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_04071_LCD__Clear(); void FCD_04071_LCD__PrintString(MX_CHAR *FCL_TEXT, MX_UINT16 FCLsz_TEXT); void FCD_04071_LCD__PrintAscii(MX_UINT8 FCL_CHARACTER); void FCD_04071_LCD__PrintNumber(MX_SINT16 FCL_NUMBER); void FCD_04071_LCD__RAMWrite(MX_UINT8 FCL_INDEX, MX_UINT8 FCL_D0, MX_UINT8 FCL_D1, MX_UINT8 FCL_D2, MX_UINT8 FCL_D3, MX_UINT8 FCL_D4, MX_UINT8 FCL_D5, MX_UINT8 FCL_D6, MX_UINT8 FCL_D7); void FCD_04071_LCD__ClearLine(MX_UINT8 FCL_LINE); void FCD_04071_LCD__Cursor(MX_UINT8 FCL_X, MX_UINT8 FCL_Y); void FCD_04071_LCD__Command(MX_UINT8 FCL_INSTRUCTION); void FCD_04071_LCD__PrintFormattedNumber(MX_UINT32 FCL_NUMBER, MX_BOOL FCL_FORMAT); void FCD_04071_LCD__ScrollDisplay(MX_UINT8 FCL_POSITION, MX_UINT8 FCL_DIRECTION); void FCD_04071_LCD__RawSend(MX_UINT8 FCL_DATA, MX_BOOL FCL_TYPE); void FCD_04071_LCD__Start(); /*========================================================================*\ Use :lut :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ #define FCVsz_00fb1_lut__FLOATFIXEDLIST 1 #define FCVsz_00fb1_lut__INTLIST 16 #define FCVsz_00fb1_lut__FLOATLIST 1 #define FCVsz_00fb1_lut__INTFIXEDLIST 1 #define FCD_00fb1_lut__INTLIST(ix) pgm_read_byte(&(FCD_00fb1_lut__INTLIST_LUT[ix])) ROMARRAY_(MX_UINT8) FCD_00fb1_lut__INTLIST_LUT ROMARRAY_E = { // Property added elements 63, 6, 91, 79, 102, 109, 125, 7, 127, 111, 119, 124, 57, 94, 121, 113 // Dynamically added elements }; /*========================================================================*\ Use :led_7seg_quad :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ void FCD_0fca1_led_7seg_quad__ShowDigit(MX_UINT8 FCL_DIGIT, MX_UINT8 FCL_VALUE, MX_UINT8 FCL_DECIMALPOINT); /*========================================================================*\ Use :bezel_radiused :Deklarationen zu Variablen :Deklarationen zur Makrofunktion \*========================================================================*/ /*========================================================================*\ Use :Mit Chip Adaption Layer \*========================================================================*/ #include "C:\Program Files (x86)\Flowcode 7\CAL\includes.c" /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d910_led_base__TurnOn() { FCP_SET(B, D, 0x1, 0x0, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d910_led_base__TurnOff() { FCP_SET(B, D, 0x1, 0x0, 1 - 1); } /*========================================================================*\ Use :led16 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d9f_led_base__TurnOn() { FCP_SET(B, D, 0x2, 0x1, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d9f_led_base__TurnOff() { FCP_SET(B, D, 0x2, 0x1, 1 - 1); } /*========================================================================*\ Use :led15 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d9e_led_base__TurnOn() { FCP_SET(B, D, 0x4, 0x2, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d9e_led_base__TurnOff() { FCP_SET(B, D, 0x4, 0x2, 1 - 1); } /*========================================================================*\ Use :led14 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d9d_led_base__TurnOn() { FCP_SET(B, D, 0x8, 0x3, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d9d_led_base__TurnOff() { FCP_SET(B, D, 0x8, 0x3, 1 - 1); } /*========================================================================*\ Use :led13 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d9c_led_base__TurnOn() { FCP_SET(B, D, 0x10, 0x4, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d9c_led_base__TurnOff() { FCP_SET(B, D, 0x10, 0x4, 1 - 1); } /*========================================================================*\ Use :led12 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d9b_led_base__TurnOn() { FCP_SET(B, D, 0x20, 0x5, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d9b_led_base__TurnOff() { FCP_SET(B, D, 0x20, 0x5, 1 - 1); } /*========================================================================*\ Use :led11 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d9a_led_base__TurnOn() { FCP_SET(B, D, 0x40, 0x6, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d9a_led_base__TurnOff() { FCP_SET(B, D, 0x40, 0x6, 1 - 1); } /*========================================================================*\ Use :led10 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d99_led_base__TurnOn() { FCP_SET(B, D, 0x80, 0x7, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d99_led_base__TurnOff() { FCP_SET(B, D, 0x80, 0x7, 1 - 1); } /*========================================================================*\ Use :led9 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d98_led_base__TurnOn() { FCP_SET(B, C, 0x1, 0x0, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d98_led_base__TurnOff() { FCP_SET(B, C, 0x1, 0x0, 1 - 1); } /*========================================================================*\ Use :led8 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d97_led_base__TurnOn() { FCP_SET(B, C, 0x2, 0x1, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d97_led_base__TurnOff() { FCP_SET(B, C, 0x2, 0x1, 1 - 1); } /*========================================================================*\ Use :led7 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d96_led_base__TurnOn() { FCP_SET(B, C, 0x4, 0x2, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d96_led_base__TurnOff() { FCP_SET(B, C, 0x4, 0x2, 1 - 1); } /*========================================================================*\ Use :led6 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d95_led_base__TurnOn() { FCP_SET(B, C, 0x8, 0x3, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d95_led_base__TurnOff() { FCP_SET(B, C, 0x8, 0x3, 1 - 1); } /*========================================================================*\ Use :led5 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d94_led_base__TurnOn() { FCP_SET(B, C, 0x10, 0x4, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d94_led_base__TurnOff() { FCP_SET(B, C, 0x10, 0x4, 1 - 1); } /*========================================================================*\ Use :led4 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d93_led_base__TurnOn() { FCP_SET(B, C, 0x20, 0x5, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d93_led_base__TurnOff() { FCP_SET(B, C, 0x20, 0x5, 1 - 1); } /*========================================================================*\ Use :led3 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d92_led_base__TurnOn() { FCP_SET(FCP_NULL, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d92_led_base__TurnOff() { FCP_SET(FCP_NULL, 1 - 1); } /*========================================================================*\ Use :led2 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :component_label1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Turn the LED off. \*=----------------------------------------------------------------------=*/ void FCD_03d91_led_base__TurnOn() { FCP_SET(FCP_NULL, 1); } /*=----------------------------------------------------------------------=*\ Use :Turn the LED on. \*=----------------------------------------------------------------------=*/ void FCD_03d91_led_base__TurnOff() { FCP_SET(FCP_NULL, 1 - 1); } /*========================================================================*\ Use :led1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_052612_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_052612_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_052612_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw16 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_052611_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x2, 0x1)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x2, 0x1)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_052611_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_052611_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw15 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_052610_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x4, 0x2)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x4, 0x2)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_052610_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_052610_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw14 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0526f_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x8, 0x3)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x8, 0x3)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526f_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526f_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw13 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0526e_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x10, 0x4)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x10, 0x4)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526e_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526e_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw12 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0526d_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x20, 0x5)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x20, 0x5)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526d_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526d_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw11 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0526c_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x40, 0x6)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x40, 0x6)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526c_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526c_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw10 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0526b_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, D, 0x80, 0x7)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, D, 0x80, 0x7)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526b_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526b_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, D, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, D, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw9 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_0526a_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526a_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_0526a_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw8 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05269_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x2, 0x1)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x2, 0x1)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05269_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05269_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x2, 0x1); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw7 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05268_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x4, 0x2)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x4, 0x2)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05268_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05268_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x4, 0x2); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw6 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05267_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x8, 0x3)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x8, 0x3)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05267_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05267_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x8, 0x3); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw5 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05266_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x10, 0x4)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x10, 0x4)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05266_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05266_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x10, 0x4); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw4 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05265_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x20, 0x5)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x20, 0x5)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05265_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05265_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x20, 0x5); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw3 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05264_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, A, 0x40, 0x6)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, A, 0x40, 0x6)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05264_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, A, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, A, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05264_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, A, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, A, 0x40, 0x6); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw2 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05263_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, A, 0x80, 0x7)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, A, 0x80, 0x7)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05263_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, A, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, A, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05263_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, A, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, A, 0x80, 0x7); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05262_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05262_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05262_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw_slide_sub_pcb1 :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :ButtonCtrl :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :switch_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Reads the button state as 0 for released or 1 for pressed :Performs debounce if required : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_05261_switch_base__ReadState() { //Lokale Variablen-Definitionen MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; MX_UINT8 FCR_RETVAL; if (0 != FCP_GET(B, C, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCR_RETVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); if (0 != FCP_GET(B, C, 0x1, 0x0)) { FCR_RETVAL = 1; } else { FCR_RETVAL = 0; } if (FCR_RETVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCR_RETVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'high' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05261_switch_base__WaitUntilHigh() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL = (0xff); // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL == 0) == 0) break; } } /*=----------------------------------------------------------------------=*\ Use :Waits until the switch is in state 'low' :The interpretation of 'high' depends on the polarity \*=----------------------------------------------------------------------=*/ void FCD_05261_switch_base__WaitUntilLow() { //Lokale Variablen-Definitionen MX_UINT8 FCL_SWITCHVAL; // The state of the pin MX_UINT16 FCL_DEL_COUNT; MX_UINT8 FCL_OLD_SWITCHVAL; while (1) { FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif FCL_DEL_COUNT = 0; FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; #if (1) // 10 > 0 while (FCL_DEL_COUNT < 10) { FCI_DELAYBYTE_MS(1); FCL_SWITCHVAL = FCP_GET(B, C, 0x1, 0x0); #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_SWITCHVAL == FCL_OLD_SWITCHVAL) { FCL_DEL_COUNT = FCL_DEL_COUNT + 1; } else { FCL_DEL_COUNT = 0; } FCL_OLD_SWITCHVAL = FCL_SWITCHVAL; } // #else //Code wurde vom Vorprozessor optimiert #endif if ((FCL_SWITCHVAL != 0) == 0) break; } } /*========================================================================*\ Use :sw_slide_sub_pcb :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :fcdhelper :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :cal_adc :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :adc_base :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC at full bit depth :Call Enable() first : :R??ckgaben : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f42_adc_base__RawSampleInt() { //Lokale Variablen-Definitionen MX_UINT16 FCR_RETVAL; FCR_RETVAL = FC_CAL_ADC_Sample(1); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a byte average sample over time :Call Enable() before this : :Parameter f??r Makro RawAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f42_adc_base__RawAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT16 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_UINT8 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(0); FCL_COUNT = FCL_COUNT + 1; FCI_DELAYBYTE_US(FCL_DELAYUS); } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(0); FCL_COUNT = FCL_COUNT + 1; } } FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage and returns as as tring : :R??ckgaben : MX_CHAR* \*=----------------------------------------------------------------------=*/ void FCD_08f42_adc_base__GetString(MX_CHAR *FCR_RETVAL, MX_UINT16 FCRsz_RETVAL) { //Lokale Variablen-Definitionen MX_FLOAT FCL_SAMPLE; FCL_SAMPLE = FCD_08f42_adc_base__GetVoltage(); FCI_FLOAT_TO_STRING(FCL_SAMPLE, FCV_PRECISION, FCR_RETVAL, FCRsz_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a byte average sample over time : :Parameter f??r Makro GetAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f42_adc_base__GetAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT8 FCR_RETVAL; FC_CAL_ADC_Enable(1, 3, 0, 40); FCR_RETVAL = FCD_08f42_adc_base__RawAverageByte(FCL_NUMSAMPLES, FCL_DELAYUS); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a full width average sample over time :Call Enable() before this : :Parameter f??r Makro RawAverageInt: : NumSamples : MX_UINT8 : DelayUs : MX_UINT8 : :R??ckgaben : MX_SINT16 \*=----------------------------------------------------------------------=*/ MX_SINT16 FCD_08f42_adc_base__RawAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT32 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_SINT16 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(1); FCL_COUNT = FCL_COUNT + 1; FCI_DELAYBYTE_US(FCL_DELAYUS); } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(1); FCL_COUNT = FCL_COUNT + 1; } } FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a full width average sample over time : :Parameter f??r Makro GetAverageInt: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :R??ckgaben : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f42_adc_base__GetAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT16 FCR_RETVAL; FC_CAL_ADC_Enable(1, 3, 0, 40); FCR_RETVAL = FCD_08f42_adc_base__RawAverageInt(FCL_NUMSAMPLES, FCL_DELAYUS); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage : :R??ckgaben : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_08f42_adc_base__GetVoltage() { //Lokale Variablen-Definitionen MX_UINT16 FCL_SAMPLE; MX_FLOAT FCR_RETVAL; FC_CAL_ADC_Enable(1, 3, 0, 40); FCL_SAMPLE = FC_CAL_ADC_Sample(1); FCR_RETVAL = flt_mul(flt_fromi(FCL_SAMPLE), 0.004883); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Enables and configures the ADC channel to be an analogue input. :Only one ADC channel can be enabled at a time. Any RAW functions will reference the last enabled channel only. \*=----------------------------------------------------------------------=*/ void FCD_08f42_adc_base__RawEnable() { FC_CAL_ADC_Enable(1, 3, 0, 40); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a byte :Call Enable() before this : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f42_adc_base__RawSampleByte() { //Lokale Variablen-Definitionen MX_UINT8 FCR_RETVAL; FCR_RETVAL = FC_CAL_ADC_Sample(0); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC at full bit depth : :R??ckgaben : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f42_adc_base__GetInt() { //Lokale Variablen-Definitionen MX_UINT16 FCR_RETVAL; FC_CAL_ADC_Enable(1, 3, 0, 40); FCR_RETVAL = FC_CAL_ADC_Sample(1); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Disables the previously enabled ADC channel and converts back to digital mode. \*=----------------------------------------------------------------------=*/ void FCD_08f42_adc_base__RawDisable() { FC_CAL_ADC_Disable(); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC as a byte : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f42_adc_base__GetByte() { //Lokale Variablen-Definitionen MX_UINT8 FCR_RETVAL; FC_CAL_ADC_Enable(1, 3, 0, 40); FCR_RETVAL = FC_CAL_ADC_Sample(0); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*========================================================================*\ Use :knob_ptr_black :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :fcdhelper :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :cal_adc :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :adc_base1 :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC at full bit depth :Call Enable() first : :R??ckgaben : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f41_adc_base1__RawSampleInt() { //Lokale Variablen-Definitionen MX_UINT16 FCR_RETVAL; FCR_RETVAL = FC_CAL_ADC_Sample(1); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a byte average sample over time :Call Enable() before this : :Parameter f??r Makro RawAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f41_adc_base1__RawAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT16 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_UINT8 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(0); FCL_COUNT = FCL_COUNT + 1; FCI_DELAYBYTE_US(FCL_DELAYUS); } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(0); FCL_COUNT = FCL_COUNT + 1; } } FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage and returns as as tring : :R??ckgaben : MX_CHAR* \*=----------------------------------------------------------------------=*/ void FCD_08f41_adc_base1__GetString(MX_CHAR *FCR_RETVAL, MX_UINT16 FCRsz_RETVAL) { //Lokale Variablen-Definitionen MX_FLOAT FCL_SAMPLE; FCL_SAMPLE = FCD_08f41_adc_base1__GetVoltage(); FCI_FLOAT_TO_STRING(FCL_SAMPLE, FCV_PRECISION, FCR_RETVAL, FCRsz_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a byte average sample over time : :Parameter f??r Makro GetAverageByte: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f41_adc_base1__GetAverageByte(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT8 FCR_RETVAL; FC_CAL_ADC_Enable(0, 3, 0, 40); FCR_RETVAL = FCD_08f41_adc_base1__RawAverageByte(FCL_NUMSAMPLES, FCL_DELAYUS); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a full width average sample over time :Call Enable() before this : :Parameter f??r Makro RawAverageInt: : NumSamples : MX_UINT8 : DelayUs : MX_UINT8 : :R??ckgaben : MX_SINT16 \*=----------------------------------------------------------------------=*/ MX_SINT16 FCD_08f41_adc_base1__RawAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT32 FCL_AVERAGE = (0x0); MX_UINT8 FCL_COUNT = (0x0); MX_SINT16 FCR_RETVAL; if (FCL_DELAYUS > 0) { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(1); FCL_COUNT = FCL_COUNT + 1; FCI_DELAYBYTE_US(FCL_DELAYUS); } } else { while (FCL_COUNT < FCL_NUMSAMPLES) { FCL_AVERAGE = FCL_AVERAGE + FC_CAL_ADC_Sample(1); FCL_COUNT = FCL_COUNT + 1; } } FCR_RETVAL = FCL_AVERAGE / FCL_COUNT; return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Function call to read the ADC as a full width average sample over time : :Parameter f??r Makro GetAverageInt: : NumSamples : MX_UINT8 : DelayUs : Number of micro seconds in between taking each sample : :R??ckgaben : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f41_adc_base1__GetAverageInt(MX_UINT8 FCL_NUMSAMPLES, MX_UINT8 FCL_DELAYUS) { //Lokale Variablen-Definitionen MX_UINT16 FCR_RETVAL; FC_CAL_ADC_Enable(0, 3, 0, 40); FCR_RETVAL = FCD_08f41_adc_base1__RawAverageInt(FCL_NUMSAMPLES, FCL_DELAYUS); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Reads the ADC as a direct voltage : :R??ckgaben : MX_FLOAT \*=----------------------------------------------------------------------=*/ MX_FLOAT FCD_08f41_adc_base1__GetVoltage() { //Lokale Variablen-Definitionen MX_UINT16 FCL_SAMPLE; MX_FLOAT FCR_RETVAL; FC_CAL_ADC_Enable(0, 3, 0, 40); FCL_SAMPLE = FC_CAL_ADC_Sample(1); FCR_RETVAL = flt_mul(flt_fromi(FCL_SAMPLE), 0.004883); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Enables and configures the ADC channel to be an analogue input. :Only one ADC channel can be enabled at a time. Any RAW functions will reference the last enabled channel only. \*=----------------------------------------------------------------------=*/ void FCD_08f41_adc_base1__RawEnable() { FC_CAL_ADC_Enable(0, 3, 0, 40); } /*=----------------------------------------------------------------------=*\ Use :Background call to read the ADC as a byte :Call Enable() before this : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f41_adc_base1__RawSampleByte() { //Lokale Variablen-Definitionen MX_UINT8 FCR_RETVAL; FCR_RETVAL = FC_CAL_ADC_Sample(0); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC at full bit depth : :R??ckgaben : MX_UINT16 \*=----------------------------------------------------------------------=*/ MX_UINT16 FCD_08f41_adc_base1__GetInt() { //Lokale Variablen-Definitionen MX_UINT16 FCR_RETVAL; FC_CAL_ADC_Enable(0, 3, 0, 40); FCR_RETVAL = FC_CAL_ADC_Sample(1); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*=----------------------------------------------------------------------=*\ Use :Disables the previously enabled ADC channel and converts back to digital mode. \*=----------------------------------------------------------------------=*/ void FCD_08f41_adc_base1__RawDisable() { FC_CAL_ADC_Disable(); } /*=----------------------------------------------------------------------=*\ Use :Blocking call to read the ADC as a byte : :R??ckgaben : MX_UINT8 \*=----------------------------------------------------------------------=*/ MX_UINT8 FCD_08f41_adc_base1__GetByte() { //Lokale Variablen-Definitionen MX_UINT8 FCR_RETVAL; FC_CAL_ADC_Enable(0, 3, 0, 40); FCR_RETVAL = FC_CAL_ADC_Sample(0); FC_CAL_ADC_Disable(); return (FCR_RETVAL); } /*========================================================================*\ Use :ctrl_lcd :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :LCD :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Clears the entire contents of the display. \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__Clear() { FCD_04071_LCD__RawSend(0x01, 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(0x02, 0); FCI_DELAYBYTE_MS(2); } /*=----------------------------------------------------------------------=*\ Use :Breaks down a string of text and sends it to the LCD via the private RawSend(byte, mask) macro : :Parameter f??r Makro PrintString: : Text[20] : Enter the text or variable to print to the LCD \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__PrintString(MX_CHAR *FCL_TEXT, MX_UINT16 FCLsz_TEXT) { //Lokale Variablen-Definitionen MX_UINT8 FCL_IDX = (0x0); MX_UINT8 FCL_COUNT; FCL_COUNT = FCI_GETLENGTH(FCL_TEXT, FCLsz_TEXT); while (FCL_IDX < FCL_COUNT) { FCD_04071_LCD__RawSend(FCL_TEXT[FCL_IDX], 0x10); FCL_IDX = FCL_IDX + 1; } } /*=----------------------------------------------------------------------=*\ Use :Takes the ascii value for a character and prints the character : :Parameter f??r Makro PrintAscii: : character : Holds an ascii value. \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__PrintAscii(MX_UINT8 FCL_CHARACTER) { FCD_04071_LCD__RawSend(FCL_CHARACTER, 0x10); } /*=----------------------------------------------------------------------=*\ Use :Based on v5 macro, will allow you to print a number. This is limited to a signed-INT, -32768 to 32767 : :Parameter f??r Makro PrintNumber: : Number : Enter the number or variable to print to the LCD \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__PrintNumber(MX_SINT16 FCL_NUMBER) { //Lokale Variablen-Definitionen #define FCLsz_S 10 MX_CHAR FCL_S[FCLsz_S]; FCI_TOSTRING(FCL_NUMBER, FCL_S,10); FCD_04071_LCD__PrintString(FCL_S, FCLsz_S); //Lokale Variablen-Definitionen #undef FCLsz_S } /*=----------------------------------------------------------------------=*\ Use :Modifies the internal memory of the LCD to allow for up to 8 customised characters to be created and stored in the device memory : :Parameter f??r Makro RAMWrite: : Index : Values 0 to 7 : d0 : MX_UINT8 : d1 : MX_UINT8 : d2 : MX_UINT8 : d3 : MX_UINT8 : d4 : MX_UINT8 : d5 : MX_UINT8 : d6 : MX_UINT8 : d7 : MX_UINT8 \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__RAMWrite(MX_UINT8 FCL_INDEX, MX_UINT8 FCL_D0, MX_UINT8 FCL_D1, MX_UINT8 FCL_D2, MX_UINT8 FCL_D3, MX_UINT8 FCL_D4, MX_UINT8 FCL_D5, MX_UINT8 FCL_D6, MX_UINT8 FCL_D7) { FCD_04071_LCD__RawSend(64 + (FCL_INDEX << 3), 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(FCL_D0, 0x10); FCD_04071_LCD__RawSend(FCL_D1, 0x10); FCD_04071_LCD__RawSend(FCL_D2, 0x10); FCD_04071_LCD__RawSend(FCL_D3, 0x10); FCD_04071_LCD__RawSend(FCL_D4, 0x10); FCD_04071_LCD__RawSend(FCL_D5, 0x10); FCD_04071_LCD__RawSend(FCL_D6, 0x10); FCD_04071_LCD__RawSend(FCL_D7, 0x10); FCD_04071_LCD__Clear(); } /*=----------------------------------------------------------------------=*\ Use :Clears a single line on the display and then moves the cursor to the start of the line to allow you to start populating the line with data. : :Parameter f??r Makro ClearLine: : Line : The line to clear, zero being the first (top) line of the display \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__ClearLine(MX_UINT8 FCL_LINE) { //Lokale Variablen-Definitionen MX_UINT8 FCL_X; if (FCL_LINE < 2) { FCD_04071_LCD__Cursor(0, FCL_LINE); FCL_X = 0; while (FCL_X < 16) { FCD_04071_LCD__RawSend(' ', 0x10); FCL_X = FCL_X + 1; } FCD_04071_LCD__Cursor(0, FCL_LINE); // } else { } } /*=----------------------------------------------------------------------=*\ Use :Moves the cursor on the LCD Display : :Parameter f??r Makro Cursor: : x : Set the cursor position in the X plane, 0 is the left most cell : y : Set the cursor position in the Y plane, 0 is the top most cell \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__Cursor(MX_UINT8 FCL_X, MX_UINT8 FCL_Y) { #if (0) // 2 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif #if (1) // 2 == 2 if (FCL_Y == 0) { FCL_Y = 0x80; } else { FCL_Y = 0xC0; } // #else //Code wurde vom Vorprozessor optimiert #endif #if (0) // 2 == 4 //Code wurde vom Vorprozessor optimiert // #else #endif FCD_04071_LCD__RawSend(FCL_Y + FCL_X, 0); FCI_DELAYBYTE_MS(2); } /*=----------------------------------------------------------------------=*\ Use :Use this method/macro to send a specific command to the LCD. Refer to the Matrix Multimedia EB006 datasheet for a list of supported instructions. For Non-Matrix LCD's refer to the manufacturers datasheet. : :Parameter f??r Makro Command: : instruction : Send a defined command to the LCD Screen. See datasheet for supported commands. \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__Command(MX_UINT8 FCL_INSTRUCTION) { FCD_04071_LCD__RawSend(FCL_INSTRUCTION, 0); FCI_DELAYBYTE_MS(2); } /*=----------------------------------------------------------------------=*\ Use :Will allow you to print a number up to 32-bits with signed or unsigned formatting. :Signed = -2147483648 to 2147483647 :Unsigned = 0 to 4294967295 : :Parameter f??r Makro PrintFormattedNumber: : Number : Enter the number or variable to print to the LCD : Format : 0=Signed, 1=Unsigned \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__PrintFormattedNumber(MX_UINT32 FCL_NUMBER, MX_BOOL FCL_FORMAT) { //Lokale Variablen-Definitionen #define FCLsz_S 15 MX_CHAR FCL_S[FCLsz_S]; if (FCL_FORMAT == 1) { FCI_UTOS32(FCL_NUMBER, FCL_S,15); } else { FCI_ITOS32((MX_SINT32)(FCL_NUMBER), FCL_S,15); } FCD_04071_LCD__PrintString(FCL_S, FCLsz_S); //Lokale Variablen-Definitionen #undef FCLsz_S } /*=----------------------------------------------------------------------=*\ Use :Scrolls the display left or right by a number of given positions. : :Parameter f??r Makro ScrollDisplay: : Position : Holds the number of positions to shift the display : direction : 0 = left, 1 = right \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__ScrollDisplay(MX_UINT8 FCL_POSITION, MX_UINT8 FCL_DIRECTION) { //Lokale Variablen-Definitionen MX_UINT8 FCL_CMD = (0x0); FCL_CMD = 0; switch (FCL_DIRECTION) { case 0: { FCL_CMD = 0x18; break; } case 'l': { FCL_CMD = 0x18; break; } case 'L': { FCL_CMD = 0x18; break; } case 1: { FCL_CMD = 0x1C; break; } case 'r': { FCL_CMD = 0x1C; break; } case 'R': { FCL_CMD = 0x1C; break; } // default: } if (FCL_CMD != 0 && FCL_POSITION != 0) { while (FCL_POSITION != 0) { FCD_04071_LCD__RawSend(FCL_CMD, 0); FCL_POSITION = FCL_POSITION - 1; } // } else { } } /*=----------------------------------------------------------------------=*\ Use :Sends data to the LCD display : :Parameter f??r Makro RawSend: : data : The data byte to send to the LCD : type : A boolean to indicate command type: true to write data, false to write a command \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__RawSend(MX_UINT8 FCL_DATA, MX_BOOL FCL_TYPE) { //Lokale Variablen-Definitionen MX_UINT8 FCL_NIBBLE; //Kommentar: //Output upper nibble of the byte #if (1) // 0 == 0 FCP_SET(B, D, 0x1, 0x0, 0); FCP_SET(B, D, 0x2, 0x1, 0); FCP_SET(B, D, 0x4, 0x2, 0); FCP_SET(B, D, 0x8, 0x3, 0); FCP_SET(B, D, 0x10, 0x4, 0); FCP_SET(B, D, 0x20, 0x5, 0); #if (0) //Code wurde vom Vorprozessor optimiert // #else #endif FCL_NIBBLE = (FCL_DATA >> 4); FCP_SET(B, D, 0x1, 0x0, (FCL_NIBBLE & 0x01)); FCL_NIBBLE = FCL_NIBBLE >> 1; FCP_SET(B, D, 0x2, 0x1, (FCL_NIBBLE & 0x01)); FCL_NIBBLE = FCL_NIBBLE >> 1; FCP_SET(B, D, 0x4, 0x2, (FCL_NIBBLE & 0x01)); FCL_NIBBLE = FCL_NIBBLE >> 1; FCP_SET(B, D, 0x8, 0x3, (FCL_NIBBLE & 0x01)); // #else //Code wurde vom Vorprozessor optimiert #endif //Kommentar: //Output byte to pins #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif //Kommentar: //Output byte to port #if (0) // 0 == 2 //Code wurde vom Vorprozessor optimiert // #else #endif if (FCL_TYPE) { FCP_SET(B, D, 0x10, 0x4, 1); // } else { } FCI_DELAYBYTE_US(100); //Kommentar: //Set Enable high, pause then set low //to acknowledge the data has been //submitted. FCP_SET(B, D, 0x20, 0x5, 1); FCI_DELAYBYTE_US(100); FCP_SET(B, D, 0x20, 0x5, 0); FCI_DELAYBYTE_US(100); #if (1) // 0 == 0 FCP_SET(B, D, 0x1, 0x0, 0); FCP_SET(B, D, 0x2, 0x1, 0); FCP_SET(B, D, 0x4, 0x2, 0); FCP_SET(B, D, 0x8, 0x3, 0); FCP_SET(B, D, 0x10, 0x4, 0); FCL_NIBBLE = (FCL_DATA & 0xf); FCP_SET(B, D, 0x1, 0x0, (FCL_NIBBLE & 0x01)); FCL_NIBBLE = FCL_NIBBLE >> 1; FCP_SET(B, D, 0x2, 0x1, (FCL_NIBBLE & 0x01)); FCL_NIBBLE = FCL_NIBBLE >> 1; FCP_SET(B, D, 0x4, 0x2, (FCL_NIBBLE & 0x01)); FCL_NIBBLE = FCL_NIBBLE >> 1; FCP_SET(B, D, 0x8, 0x3, (FCL_NIBBLE & 0x01)); if (FCL_TYPE) { FCP_SET(B, D, 0x10, 0x4, 1); // } else { } FCI_DELAYBYTE_US(100); FCP_SET(B, D, 0x20, 0x5, 1); FCI_DELAYBYTE_US(100); FCP_SET(B, D, 0x20, 0x5, 0); FCI_DELAYBYTE_US(100); // #else //Code wurde vom Vorprozessor optimiert #endif } /*=----------------------------------------------------------------------=*\ Use :Startup routine required by the hardware device. :Automatically clears the display after initialising. \*=----------------------------------------------------------------------=*/ void FCD_04071_LCD__Start() { #if (1) // 0 == 0 FCP_SET(B, D, 0x1, 0x0, 0); FCP_SET(B, D, 0x2, 0x1, 0); FCP_SET(B, D, 0x4, 0x2, 0); FCP_SET(B, D, 0x8, 0x3, 0); FCP_SET(B, D, 0x10, 0x4, 0); FCP_SET(B, D, 0x20, 0x5, 0); // #else //Code wurde vom Vorprozessor optimiert #endif #if (0) // 0 == 1 //Code wurde vom Vorprozessor optimiert // #else #endif #if (0) // 0 == 2 //Code wurde vom Vorprozessor optimiert // #else #endif #if (0) //Code wurde vom Vorprozessor optimiert // #else #endif FCI_DELAYBYTE_MS(12); FCD_04071_LCD__RawSend(0x33, 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(0x33, 0); FCI_DELAYBYTE_MS(2); #if (0) // 0 > 0 //Code wurde vom Vorprozessor optimiert #else FCD_04071_LCD__RawSend(0x32, 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(0x2c, 0); #endif FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(0x06, 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(0x0c, 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(0x01, 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__RawSend(0x02, 0); FCI_DELAYBYTE_MS(2); FCD_04071_LCD__Clear(); } /*========================================================================*\ Use :lut :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :led_7seg_quad :Makro-Implementierungen \*========================================================================*/ /*=----------------------------------------------------------------------=*\ Use :Set the number and decimal point to be displayed in the given digit of the display. : :Parameter f??r Makro ShowDigit: : Digit : Which of the four digits to change. (0...3) : Value : The number value to set the digit to (0...15), 16=Clear : DecimalPoint : Whether to show the decimal point for the chosen digit. \*=----------------------------------------------------------------------=*/ void FCD_0fca1_led_7seg_quad__ShowDigit(MX_UINT8 FCL_DIGIT, MX_UINT8 FCL_VALUE, MX_UINT8 FCL_DECIMALPOINT) { //Kommentar: //Configure the segments first. if (FCL_VALUE < 16) { FCL_VALUE = FCD_00fb1_lut__INTLIST(FCL_VALUE); FCP_SET(B, D, 0x1, 0x0, 0 == (FCL_VALUE & 1)); FCL_VALUE = FCL_VALUE >> 1; FCP_SET(B, D, 0x2, 0x1, 0 == (FCL_VALUE & 1)); FCL_VALUE = FCL_VALUE >> 1; FCP_SET(B, D, 0x4, 0x2, 0 == (FCL_VALUE & 1)); FCL_VALUE = FCL_VALUE >> 1; FCP_SET(B, D, 0x8, 0x3, 0 == (FCL_VALUE & 1)); FCL_VALUE = FCL_VALUE >> 1; FCP_SET(B, D, 0x10, 0x4, 0 == (FCL_VALUE & 1)); FCL_VALUE = FCL_VALUE >> 1; FCP_SET(B, D, 0x20, 0x5, 0 == (FCL_VALUE & 1)); FCL_VALUE = FCL_VALUE >> 1; FCP_SET(B, D, 0x40, 0x6, 0 == (FCL_VALUE & 1)); FCP_SET(B, D, 0x80, 0x7, 0 == (FCL_DECIMALPOINT & 1)); } else { if (FCL_VALUE == 16) { FCP_SET(B, D, 0x1, 0x0, 0 == 0); FCP_SET(B, D, 0x2, 0x1, 0 == 0); FCP_SET(B, D, 0x4, 0x2, 0 == 0); FCP_SET(B, D, 0x8, 0x3, 0 == 0); FCP_SET(B, D, 0x10, 0x4, 0 == 0); FCP_SET(B, D, 0x20, 0x5, 0 == 0); FCP_SET(B, D, 0x40, 0x6, 0 == 0); // } else { } } switch (FCL_DIGIT) { case 1: { FCP_SET(B, C, 0x1, 0x0, 0); FCP_SET(B, C, 0x4, 0x2, 0); FCP_SET(B, C, 0x8, 0x3, 0); FCP_SET(B, C, 0x2, 0x1, 1 - 0); break; } case 2: { FCP_SET(B, C, 0x1, 0x0, 0); FCP_SET(B, C, 0x2, 0x1, 0); FCP_SET(B, C, 0x8, 0x3, 0); FCP_SET(B, C, 0x4, 0x2, 1 - 0); break; } case 3: { FCP_SET(B, C, 0x1, 0x0, 0); FCP_SET(B, C, 0x2, 0x1, 0); FCP_SET(B, C, 0x4, 0x2, 0); FCP_SET(B, C, 0x8, 0x3, 1 - 0); break; } default: { FCP_SET(B, C, 0x2, 0x1, 0); FCP_SET(B, C, 0x4, 0x2, 0); FCP_SET(B, C, 0x8, 0x3, 0); FCP_SET(B, C, 0x1, 0x0, 1 - 0); } } } /*========================================================================*\ Use :bezel_radiused :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :panel :Makro-Implementierungen \*========================================================================*/ /*========================================================================*\ Use :Main \*========================================================================*/ int main() { MCUSR=0x00; mainendloop: goto mainendloop; } /*========================================================================*\ Use :Unterbrechung \*========================================================================*/