/********************************************************************* * Flowcode CAL PWM File * * File: PIC16BIT_CAL_PWM.c * * (c) 2011 Matrix Multimedia Ltd. * http://www.matrixmultimedia.com * * Software License Agreement * * The software supplied herewith by Matrix Multimedia Ltd (the * “Company”) for its Flowcode graphical programming language is * intended and supplied to you, the Company’s customer, for use * solely and exclusively on the Company's products. The software * is owned by the Company, and is protected under applicable * copyright laws. All rights are reserved. Any use in violation * of the foregoing restrictions may subject the user to criminal * sanctions under applicable laws, as well as to civil liability * for the breach of the terms and conditions of this licence. * * THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES, * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * * Changelog: * * date | by | description * -------+----+----------------------------------------------------- * 041011 | BR | Created * 050312 | BR | Updated to v5.1 CAL Schema * 290812 | BR | Added new FCD supplied code and upped max PWM count from 10 to 16 * 040912 | BR | Added the MX_OCx definition to allow all families to work * 280912 | BR | Fixed an issue with PWM remappable defines * 011012 | BR | Added workaround for non working PWM on EP devices * 030713 | LM | Standard API calls * 030615 | BR | PWM Allocated Timer */ #define MX_PWM_CHANNEL_X CAL_APPEND(MX_PWM_CHANNEL_, MX_PWM_NUM) #define MX_PWM_HWALT_X CAL_APPEND(MX_PWM_HWALT_, MX_PWM_NUM) #define MX_PWM_PORT_X CAL_APPEND(MX_PWM_PORT_, MX_PWM_NUM) #define MX_PWM_TRIS_X CAL_APPEND(MX_PWM_TRIS_, MX_PWM_NUM) #define MX_PWM_PIN_X CAL_APPEND(MX_PWM_PIN_, MX_PWM_NUM) #define MX_PWM_RPOR_X CAL_APPEND(MX_PWM_RPOR_, MX_PWM_NUM) #define MX_PWM_RPOC_X CAL_APPEND(MX_PWM_RPOC_, MX_PWM_NUM) #define MX_PWM_TMR_X CAL_APPEND(MX_PWM_TMR_, MX_PWM_NUM) //I2C Master Functions CALFUNCTION(void, FC_CAL_PWM_Enable_, (void)); CALFUNCTION(void, FC_CAL_PWM_Disable_, (void)); CALFUNCTION(void, FC_CAL_PWM_SetDuty8Bit_, (MX_UINT8 duty)); CALFUNCTION(void, FC_CAL_PWM_ChangePeriod_, (MX_UINT16 period, MX_UINT16 prescaler)); CALFUNCTION(void, FC_CAL_PWM_SetDuty10Bit_, (MX_UINT16 duty)); #ifndef OC1CON #ifdef OC1CON1 #define OC1CON OC1CON1 #endif #endif #ifndef OC2CON #ifdef OC2CON1 #define OC2CON OC2CON1 #endif #endif #ifndef OC3CON #ifdef OC3CON1 #define OC3CON OC3CON1 #endif #endif #ifndef OC4CON #ifdef OC4CON1 #define OC4CON OC4CON1 #endif #endif #ifndef OC5CON #ifdef OC5CON1 #define OC5CON OC5CON1 #endif #endif #ifndef OC6CON #ifdef OC6CON1 #define OC6CON OC6CON1 #endif #endif #ifndef OC7CON #ifdef OC7CON1 #define OC7CON OC7CON1 #endif #endif #ifndef OC8CON #ifdef OC8CON1 #define OC8CON OC8CON1 #endif #endif #ifndef OC9CON #ifdef OC9CON1 #define OC9CON OC9CON1 #endif #endif #ifndef OC10CON #ifdef OC10CON1 #define OC10CON OC10CON1 #endif #endif #ifndef OC11CON #ifdef OC11CON1 #define OC11CON OC11CON1 #endif #endif #ifndef OC12CON #ifdef OC12CON1 #define OC12CON OC12CON1 #endif #endif #ifndef OC13CON #ifdef OC13CON1 #define OC13CON OC13CON1 #endif #endif #ifndef OC14CON #ifdef OC14CON1 #define OC14CON OC14CON1 #endif #endif #ifndef OC15CON #ifdef OC15CON1 #define OC15CON OC15CON1 #endif #endif #ifndef OC16CON #ifdef OC16CON1 #define OC16CON OC16CON1 #endif #endif CALFUNCTION(void, FC_CAL_PWM_Enable_, (void)) { #ifdef MX_PWM //Remappable PWM Functionality #ifdef MX_PWM_REMAPPABLE MX_PWM_RPOR_X = MX_PWM_RPOC_X; //Assign PWM Channel OCx -> RPx - See FCD Defines For Info #endif #if (MX_PWM_HWALT_X == 0) //Default PWM Pin #ifndef MX_PWM_PORT_X //Error checking #error "This chip does not have PWM channel 1 defined" #endif FC_CAL_Bit_Low_DDR (MX_PWM_PORT_X, MX_PWM_TRIS_X, MX_PWM_PIN_X); //PWM pin is an output #else //Alternate PWM Pin #ifndef MX_PWM_PORTA_X //Error checking #error "This chip does not have PWM alt channel 1 defined" #endif FC_CAL_Bit_Low_DDR (MX_PWM_PORTA_A, MX_PWM_TRISA_X, MX_PWM_PINA_X); //PWM pin is an output #endif #if (MX_PWM_CHANNEL_X == 1) #ifdef MX_PWM_OCxCON #define OC1CON OC1CON1 #define MXWA #endif OC1RS = 0; //Enable Capture Compare Channel 1 OC1R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC1CON = 0x1005; OC1CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC1CON = 0x0005; OC1CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC1CON = 0x0405; OC1CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC1CON = 0x0805; OC1CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC1CON = 0x0C05; OC1CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC1CON = 0x0006; //Timer 2 #else OC1CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 2) #ifdef MX_PWM_OCxCON #define OC2CON OC2CON1 #define MXWA OC2CON2 = 0x000C; //Timer 2 is clock source #endif OC2RS = 0; //Enable Capture Compare Channel 2 OC2R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC2CON = 0x1005; OC2CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC2CON = 0x0005; OC2CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC2CON = 0x0405; OC2CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC2CON = 0x0805; OC2CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC2CON = 0x0C05; OC2CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC2CON = 0x0006; //Timer 2 #else OC2CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 3) #ifdef MX_PWM_OCxCON #define OC3CON OC3CON1 #define MXWA OC3CON2 = 0x000C; //Timer 2 is clock source #endif OC3RS = 0; //Enable Capture Compare Channel 3 OC3R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC3CON = 0x1005; OC3CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC3CON = 0x0005; OC3CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC3CON = 0x0405; OC3CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC3CON = 0x0805; OC3CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC3CON = 0x0C05; OC3CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC3CON = 0x0006; //Timer 2 #else OC3CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 4) #ifdef MX_PWM_OCxCON #define OC4CON OC4CON1 #define MXWA OC4CON2 = 0x000C; //Timer 2 is clock source #endif OC4RS = 0; //Enable Capture Compare Channel 4 OC4R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC4CON = 0x1005; OC4CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC4CON = 0x0005; OC4CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC4CON = 0x0405; OC4CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC4CON = 0x0805; OC4CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC4CON = 0x0C05; OC4CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC4CON = 0x0006; //Timer 2 #else OC4CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 5) #ifdef MX_PWM_OCxCON #define OC5CON OC5CON1 #define MXWA OC5CON2 = 0x000C; //Timer 2 is clock source #endif OC5RS = 0; //Enable Capture Compare Channel 5 OC5R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC5CON = 0x1005; OC5CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC5CON = 0x0005; OC5CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC5CON = 0x0405; OC5CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC5CON = 0x0805; OC5CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC5CON = 0x0C05; OC5CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC5CON = 0x0006; //Timer 2 #else OC5CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 6) #ifdef MX_PWM_OCxCON #define OC6CON OC6CON1 #define MXWA OC6CON2 = 0x000C; //Timer 2 is clock source #endif OC6RS = 0; //Enable Capture Compare Channel 6 OC6R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC6CON = 0x1005; OC6CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC6CON = 0x0005; OC6CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC6CON = 0x0405; OC6CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC6CON = 0x0805; OC6CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC6CON = 0x0C05; OC6CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC6CON = 0x0006; //Timer 2 #else OC6CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 7) #ifdef MX_PWM_OCxCON #define OC7CON OC3CON1 #define MXWA OC7CON2 = 0x000C; //Timer 2 is clock source #endif OC7RS = 0; //Enable Capture Compare Channel 7 OC7R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC7CON = 0x1005; OC7CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC7CON = 0x0005; OC7CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC7CON = 0x0405; OC7CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC7CON = 0x0805; OC7CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC7CON = 0x0C05; OC7CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC7CON = 0x0006; //Timer 2 #else OC7CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 8) #ifdef MX_PWM_OCxCON #define OC8CON OC8CON1 #define MXWA OC8CON2 = 0x000C; //Timer 2 is clock source #endif OC8RS = 0; //Enable Capture Compare Channel 8 OC8R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC8CON = 0x1005; OC8CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC8CON = 0x0005; OC8CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC8CON = 0x0405; OC8CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC8CON = 0x0805; OC8CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC8CON = 0x0C05; OC8CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC8CON = 0x0006; //Timer 2 #else OC8CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 9) #ifdef MX_PWM_OCxCON #define OC9CON OC9CON1 #define MXWA OC9CON2 = 0x000C; //Timer 2 is clock source #endif OC9RS = 0; //Enable Capture Compare Channel 9 OC9R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC9CON = 0x1005; OC9CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC9CON = 0x0005; OC9CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC9CON = 0x0405; OC9CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC9CON = 0x0805; OC9CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC9CON = 0x0C05; OC9CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC9CON = 0x0006; //Timer 2 #else OC9CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 10) #ifdef MX_PWM_OCxCON #define OC10CON OC10CON1 #define MXWA OC10CON2 = 0x000C; //Timer 2 is clock source #endif OC10RS = 0; //Enable Capture Compare Channel 10 OC10R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC10CON = 0x1005; OC10CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC10CON = 0x0005; OC10CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC10CON = 0x0405; OC10CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC10CON = 0x0805; OC10CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC10CON = 0x0C05; OC10CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC10CON = 0x0006; //Timer 2 #else OC10CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 11) #ifdef MX_PWM_OCxCON #define OC11CON OC11CON1 #define MXWA OC11CON2 = 0x000C; //Timer 2 is clock source #endif OC11RS = 0; //Enable Capture Compare Channel 11 OC11R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC11CON = 0x1005; OC11CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC11CON = 0x0005; OC11CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC11CON = 0x0405; OC11CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC11CON = 0x0805; OC11CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC11CON = 0x0C05; OC11CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC11CON = 0x0006; //Timer 2 #else OC11CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 12) #ifdef MX_PWM_OCxCON #define OC12CON OC12CON1 #define MXWA OC12CON2 = 0x000C; //Timer 2 is clock source #endif OC12RS = 0; //Enable Capture Compare Channel 12 OC12R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC12CON = 0x1005; OC12CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC12CON = 0x0005; OC12CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC12CON = 0x0405; OC12CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC12CON = 0x0805; OC12CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC12CON = 0x0C05; OC12CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC12CON = 0x0006; //Timer 2 #else OC12CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 13) #ifdef MX_PWM_OCxCON #define OC13CON OC13CON1 #define MXWA OC13CON2 = 0x000C; //Timer 2 is clock source #endif OC13RS = 0; //Enable Capture Compare Channel 13 OC13R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC13CON = 0x1005; OC13CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC13CON = 0x0005; OC13CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC13CON = 0x0405; OC13CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC13CON = 0x0805; OC13CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC13CON = 0x0C05; OC13CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC13CON = 0x0006; //Timer 2 #else OC13CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 14) #ifdef MX_PWM_OCxCON #define OC14CON OC14CON1 #define MXWA OC14CON2 = 0x000C; //Timer 2 is clock source #endif OC14RS = 0; //Enable Capture Compare Channel 14 OC14R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC14CON = 0x1005; OC14CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC14CON = 0x0005; OC14CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC14CON = 0x0405; OC14CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC14CON = 0x0805; OC14CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC14CON = 0x0C05; OC14CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC14CON = 0x0006; //Timer 2 #else OC14CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 15) #ifdef MX_PWM_OCxCON #define OC15CON OC15CON1 #define MXWA OC15CON2 = 0x000C; //Timer 2 is clock source #endif OC15RS = 0; //Enable Capture Compare Channel 15 OC15R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC15CON = 0x1005; OC15CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC15CON = 0x0005; OC15CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC15CON = 0x0405; OC15CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC15CON = 0x0805; OC15CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC15CON = 0x0C05; OC15CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC15CON = 0x0006; //Timer 2 #else OC15CON = 0x000E; //Timer 3 #endif #endif #endif #if (MX_PWM_CHANNEL_X == 16) #ifdef MX_PWM_OCxCON #define OC16CON OC16CON1 #define MXWA OC16CON2 = 0x000C; //Timer 2 is clock source #endif OC16RS = 0; //Enable Capture Compare Channel 16 OC16R = 0; #ifdef MXWA #if (MX_PWM_TMR_X == 1) //Timer 1 is clock source OC16CON = 0x1005; OC16CON2 = 0x000B; #endif #if (MX_PWM_TMR_X == 2) //Timer 2 is clock source OC16CON = 0x0005; OC16CON2 = 0x000C; #endif #if (MX_PWM_TMR_X == 3) //Timer 3 is clock source OC16CON = 0x0405; OC16CON2 = 0x000D; #endif #if (MX_PWM_TMR_X == 4) //Timer 4 is clock source OC16CON = 0x0805; OC16CON2 = 0x000E; #endif #if (MX_PWM_TMR_X == 5) //Timer 5 is clock source OC16CON = 0x0C05; OC16CON2 = 0x000F; #endif #else #if (MX_PWM_TMR_X == 2) OC16CON = 0x0006; //Timer 2 #else OC16CON = 0x000E; //Timer 3 #endif #endif #endif #else #error "Hardware PWM not supported by Target microcontroller." #endif } CALFUNCTION(void, FC_CAL_PWM_Disable_, (void)) { #if (MX_PWM_HWALT_X == 0) //Default PWM Pin FC_CAL_Bit_In_DDR (MX_PWM_PORT_X, MX_PWM_TRIS_X, MX_PWM_PIN_X); //PWM pin is an input #else //Alternate PWM Pin FC_CAL_Bit_In_DDR (MX_PWM_PORTA_X, MX_PWM_TRISA_X, MX_PWM_PINA_X); //PWM pin is an input #endif #if (MX_PWM_CHANNEL_X == 1) OC1CON = 0; //Disable Capture Compare Channel 1 #endif #if (MX_PWM_CHANNEL_X == 2) OC2CON = 0; //Disable Capture Compare Channel 2 #endif #if (MX_PWM_CHANNEL_X == 3) OC3CON = 0; //Disable Capture Compare Channel 3 #endif #if (MX_PWM_CHANNEL_X == 4) OC4CON = 0; //Disable Capture Compare Channel 4 #endif #if (MX_PWM_CHANNEL_X == 5) OC5CON = 0; //Disable Capture Compare Channel 5 #endif #if (MX_PWM_CHANNEL_X == 6) OC6CON = 0; //Disable Capture Compare Channel 6 #endif #if (MX_PWM_CHANNEL_X == 7) OC7CON = 0; //Disable Capture Compare Channel 7 #endif #if (MX_PWM_CHANNEL_X == 8) OC8CON = 0; //Disable Capture Compare Channel 8 #endif #if (MX_PWM_CHANNEL_X == 9) OC9CON = 0; //Disable Capture Compare Channel 9 #endif #if (MX_PWM_CHANNEL_X == 10) OC10CON = 0; //Disable Capture Compare Channel 10 #endif #if (MX_PWM_CHANNEL_X == 11) OC11CON = 0; //Disable Capture Compare Channel 11 #endif #if (MX_PWM_CHANNEL_X == 12) OC12CON = 0; //Disable Capture Compare Channel 12 #endif #if (MX_PWM_CHANNEL_X == 13) OC13CON = 0; //Disable Capture Compare Channel 13 #endif #if (MX_PWM_CHANNEL_X == 14) OC14CON = 0; //Disable Capture Compare Channel 14 #endif #if (MX_PWM_CHANNEL_X == 15) OC15CON = 0; //Disable Capture Compare Channel 15 #endif #if (MX_PWM_CHANNEL_X == 16) OC16CON = 0; //Disable Capture Compare Channel 16 #endif } CALFUNCTION(void, FC_CAL_PWM_SetDuty8Bit_, (MX_UINT8 nDuty)) { if (nDuty == 0) nDuty = 1; #if (MX_PWM_CHANNEL_X == 1) OC1RS = nDuty; //Update Capture Compare Count 1 #endif #if (MX_PWM_CHANNEL_X == 2) OC2RS = nDuty; //Update Capture Compare Count 2 #endif #if (MX_PWM_CHANNEL_X == 3) OC3RS = nDuty; //Update Capture Compare Count 3 #endif #if (MX_PWM_CHANNEL_X == 4) OC4RS = nDuty; //Update Capture Compare Count 4 #endif #if (MX_PWM_CHANNEL_X == 5) OC5RS = nDuty; //Update Capture Compare Count 5 #endif #if (MX_PWM_CHANNEL_X == 6) OC6RS = nDuty; //Update Capture Compare Count 6 #endif #if (MX_PWM_CHANNEL_X == 7) OC7RS = nDuty; //Update Capture Compare Count 7 #endif #if (MX_PWM_CHANNEL_X == 8) OC8RS = nDuty; //Update Capture Compare Count 8 #endif #if (MX_PWM_CHANNEL_X == 9) OC9RS = nDuty; //Update Capture Compare Count 9 #endif #if (MX_PWM_CHANNEL_X == 10) OC10RS = nDuty; //Update Capture Compare Count 10 #endif #if (MX_PWM_CHANNEL_X == 11) OC11RS = nDuty; //Update Capture Compare Count 11 #endif #if (MX_PWM_CHANNEL_X == 12) OC12RS = nDuty; //Update Capture Compare Count 12 #endif #if (MX_PWM_CHANNEL_X == 13) OC13RS = nDuty; //Update Capture Compare Count 13 #endif #if (MX_PWM_CHANNEL_X == 14) OC14RS = nDuty; //Update Capture Compare Count 14 #endif #if (MX_PWM_CHANNEL_X == 15) OC15RS = nDuty; //Update Capture Compare Count 15 #endif #if (MX_PWM_CHANNEL_X == 16) OC16RS = nDuty; //Update Capture Compare Count 16 #endif } CALFUNCTION(void, FC_CAL_PWM_ChangePeriod_, (MX_UINT16 period, MX_UINT16 prescaler)) { #ifdef MX_PWM //Hardware Mode #if (MX_PWM_TMR_X == 1) PR1 = period; switch (prescaler) { default: T1CON = 0x8000; break; case 8: T1CON = 0x8010; break; case 64: T1CON = 0x8020; break; case 256: T1CON = 0x8030; break; } #endif #if (MX_PWM_TMR_X == 2) PR2 = period; switch (prescaler) { default: T2CON = 0x8000; break; case 8: T2CON = 0x8010; break; case 64: T2CON = 0x8020; break; case 256: T2CON = 0x8030; break; } #endif #if (MX_PWM_TMR_X == 3) PR3 = period; switch (prescaler) { default: T3CON = 0x8000; break; case 8: T3CON = 0x8010; break; case 64: T3CON = 0x8020; break; case 256: T3CON = 0x8030; break; } #endif #if (MX_PWM_TMR_X == 4) PR4 = period; switch (prescaler) { default: T4CON = 0x8000; break; case 8: T4CON = 0x8010; break; case 64: T4CON = 0x8020; break; case 256: T4CON = 0x8030; break; } #endif #if (MX_PWM_TMR_X == 5) PR5 = period; switch (prescaler) { default: T5CON = 0x8000; break; case 8: T5CON = 0x8010; break; case 64: T5CON = 0x8020; break; case 256: T5CON = 0x8030; break; } #endif #endif } CALFUNCTION(void, FC_CAL_PWM_SetDuty10Bit_, (MX_UINT16 duty)) { if (duty < 1) duty = 1; #if (MX_PWM_CHANNEL_X == 1) OC1RS = duty; #endif #if (MX_PWM_CHANNEL_X == 2) OC2RS = duty; #endif #if (MX_PWM_CHANNEL_X == 3) OC3RS = duty; #endif #if (MX_PWM_CHANNEL_X == 4) OC4RS = duty; #endif #if (MX_PWM_CHANNEL_X == 5) OC5RS = duty; #endif #if (MX_PWM_CHANNEL_X == 6) OC6RS = duty; #endif #if (MX_PWM_CHANNEL_X == 7) OC7RS = duty; #endif #if (MX_PWM_CHANNEL_X == 8) OC8RS = duty; #endif #if (MX_PWM_CHANNEL_X == 9) OC9RS = duty; #endif #if (MX_PWM_CHANNEL_X == 10) OC10RS = duty; #endif #if (MX_PWM_CHANNEL_X == 11) OC11RS = duty; #endif #if (MX_PWM_CHANNEL_X == 12) OC12RS = duty; #endif #if (MX_PWM_CHANNEL_X == 13) OC13RS = duty; #endif #if (MX_PWM_CHANNEL_X == 14) OC14RS = duty; #endif #if (MX_PWM_CHANNEL_X == 15) OC15RS = duty; #endif #if (MX_PWM_CHANNEL_X == 16) OC16RS = duty; #endif }