<root>
<document schema='101' license='1,Roberto Castaldo,J2WZYR' title='Smista Uova' description='Il dispositivo ha un indirizzo univoco.
Riceve da una logica esterna tramite la linea seriale 3 caratteri che indicano
il primo l&apos;indirizzo a a cui gli altri due caratteri che seguono sono destinati.

il secondo ed il terzo carattere andranno visualizzati sul display relativo: 
secondo carattere va visualizzato nella cifra a sinistra ed il terzo nella cifra a destra.' target='PIC.18F.18F1220' >
	<config data='!0,c800!8,f8!10,14fc!18,f4!20,80ff!28,ff!30,80!38,ff!40,8000!48,bf!50,e0ff!58,ff!60,40ff!68,ff%8,8%e,1%f,1%10,0%11,0%12,3%18,0%19,a%2f,1%30,0%32,0%37,1%40,0%41,0%4f,1%4e,0%50,1%51,1%5f,1%5e,1%5d,1%60,1%61,1%6e,1' clkspd='8000000' simspd='1' usewdt='0' constif='0' />
	<plugins >
		<dll_dbg_icd enabled='0' >
			<data name='debug' value='1' />
			<data name='userpins' value='0' />
			<data name='speed' value='1000' />
			<data name='usev9' value='0' />
			<data name='breaks' value='8' />
			<data name='stacks' value='8' />
			<data name='clkport' value='1' />
			<data name='clkbit' value='6' />
			<data name='dataport' value='1' />
			<data name='databit' value='7' />
			<data name='ghostype' value='0' />
			<data name='monitor' value='1' />
			<data name='ictloop' value='1' />
			<data name='ictrate' value='1000' />
			<data name='ictmask' value='-1' />
			<data name='anlpres' value='255' />
			<data name='digmask1' value='-1' />
			<data name='digmask2' value='-1' />
		</dll_dbg_icd>
		<dll_models enabled='1' />
		<dll_upgrader enabled='1' />
		<dll_webhelp enabled='1' />
	</plugins>
	<supplement use='0' head='' body='' />
	<debug >
		<watch expr='Puntatore_al_dato' />
		<watch expr='Dato_della_riga' />
		<watch expr='Counter_colonne' />
		<watch expr='CHAR_DX' />
		<watch expr='Counter_Riga' />
		<watch expr='CHAR_SX' />
		<watch expr='Puntatore_char_dx' />
		<watch expr='Puntatore_char_sx' />
		<watch expr='Primo_char_ricevuto' />
		<watch expr='Counter_chars_received' />
		<watch expr='Bit_8_Codice' />
		<watch expr='Bit_4_Codice' />
		<watch expr='Bit_1_Codice' />
		<watch expr='Bit_2_Codice' />
		<watch expr='Address' />
	</debug>
	<components >
		<settings autoimg='1' center='1' unitscale='0' fixedscale='0' fixedx='1' fixedy='1' fixedz='1' headcode='0' />
		<definition guid='31786a4e-1be4-458a-b1ba-9d3c1c85e424' vstate='40' vmin='0' vmaj='1' srcleaf='' visiblename='' description='' category='Misc' catenable='1' author='' manuname='' manucode='' sysinfo='0' keywords='' dynamic='0' iconpath='' />
		<component class_type='root' codename='panel' x='0' y='0' z='0' xsz='1' ysz='1' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
			<resources />
			<properties />
			<values />
			<events />
			<apis />
			<variables >
				<variable public='0' >
					<def class_type='variable' name='Counter_chars_received' type='u8' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Punto_Interrogativo' type='s16' description='Valore del puntatore in tabella per punto di domanda' isconst='1' isinit='1' usrinit='185' setinit='185' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Bit_1_Codice' type='b1' description='LSD del codice dispositivo' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Address' type='u8' description='Indirizzo del dispositivo' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Punto_Esclamativo' type='s16' description='valore del puntatore in tabella per formare un punto esclamativo' isconst='1' isinit='1' usrinit='180' setinit='180' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Counter_Riga' type='u8' description='n° della riga del display a cui si punta' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Attesa_char_dx' type='s16' description='' isconst='1' isinit='1' usrinit='2' setinit='2' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='PointerTabella' type='u8' description='Puntatorealla alla riga nel buffer caratteri' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Attesa_char_sx' type='s16' description='' isconst='1' isinit='1' usrinit='1' setinit='1' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='CHAR_ADDRESS' type='u8' description='si tratta del dato di indirizzo del dispositivo' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Bit_8_Codice' type='b1' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Secondo_char_ricevuto' type='u8' description='Secondo carattere ricevuto uello della PRIMA CIFRA DI SX' isconst='0' isinit='1' usrinit='0' setinit='&quot; &quot;' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Start_timeout' type='b1' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Bit_4_Codice' type='b1' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='CHAR_DX' type='u8' description='carattere ricevuto come carattere da scrivere a destra' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Primo_char_ricevuto' type='u8' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='CHAR_SX' type='u8' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Blank' type='s16' description='valore puntatore alla tabella per crivere uno spazio (blank)' isconst='1' isinit='1' usrinit='190' setinit='190' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Char_ricevuto' type='u8' description='Carattere ricevuto dalla seriale' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Puntatore_char_dx' type='u8' description='Puntatore alla tabella caratteri se dato numerico' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Puntatore_char_sx' type='u8' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Puntatore_al_dato_char_DX' type='u8' description='Puntatore in rom al dato relativo al carattere destro' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Show_standby' type='s16' description='puntatore alla tabella caratteri per visualizzare simbolo di standby' isconst='1' isinit='1' usrinit='195' setinit='195' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Bit_16_Codice' type='b1' description='Il più altoBit per indirizzo (vale 16)' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Puntatore_al_dato' type='u8' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Puntatore_al_dato_char_SX' type='u8' description='Puntatore al dato in rom relativo al char SX' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Clock_Int' type='u8' description='variabile che contiene il tempo max per ricevere i caratteri' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Bit_2_Codice' type='b1' description='' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Dato_della_riga' type='u8' description='Dato che viene inviato per accendere i pixel dellariga' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Counter_colonne' type='u8' description='Contatore avanzamento puntatore alla colonna' isconst='0' isinit='1' usrinit='0' setinit='0' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Terzo_char_ricevuto' type='u8' description='Terzo carattere ricevuto quello della CIFRA a DESTRA' isconst='0' isinit='1' usrinit='0' setinit='&quot; &quot;' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Time_max_rec' type='s16' description='Massimo  tempo per ricevere caratteri dal primo' isconst='1' isinit='1' usrinit='10' setinit='10' />
				</variable>
				<variable public='0' >
					<def class_type='variable' name='Counter_time_rec_chars' type='u16' description='Counter di max tempo dal primo carattere ricevuto' isconst='0' isinit='1' usrinit='10' setinit='Time_max_rec' />
				</variable>
			</variables>
			<macros >
				<macro >
					<flowline name='Clear_Riga_1' description='cancella la riga più in basso del display' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='output' title='Uscita' mode='1' port='1048577' mask='128' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='1' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Uscita' mode='1' port='1048577' mask='128' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
					</flowline>
				</macro>
				<macro >
					<flowline name='Init_max_219' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0A' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='10' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0A' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='10' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='9' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='9' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0B' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='7' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0B' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='7' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0C' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='1' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0C' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='1' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0F' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0X0F' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='255' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='255' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
					</flowline>
				</macro>
				<macro >
					<flowline name='Da_Char_a_Puntatore' description='In base al caratterericevuto ne ricava il puntatore alla tabella grafica  per scriverlo' >
						<return name='Return' type='u8' description='' isconst='0' isinit='0' usrinit='0' setinit='' />
						<command class_type='decision' title='Intercettiamo caratteri speciali' exp='CHAR_SX = &apos;!&apos;' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Puntatore_char_sx = Punto_Esclamativo' />
								</command>
							</flowline>
							<flowline >
								<command class_type='decision' title='Se blanc' exp='CHAR_SX = &apos; &apos;' swap='0' >
									<flowline >
										<command class_type='calculation' title='Calcolo' >
											<exp exp='Puntatore_char_sx = Blank' />
										</command>
									</flowline>
									<flowline >
										<command class_type='decision' title='Decisione' exp='CHAR_SX &gt;= &apos;A&apos;' swap='0' >
											<flowline >
												<command class_type='calculation' title='Se carattere alfabetic SX  minuscolo lo forza maiuscolo' >
													<exp exp='CHAR_SX = CHAR_SX &amp; 0x5F' />
												</command>
												<command class_type='decision' title='Forse maggiore di Z ?' exp='CHAR_SX &gt; &apos;Z&apos;' swap='0' >
													<flowline >
														<command class_type='calculation' title='Se carattere maggiore di una Z scriverai un punto di domanda' >
															<exp exp='Puntatore_char_sx = Punto_Interrogativo' />
															<exp exp='' />
														</command>
													</flowline>
													<flowline >
														<command class_type='calculation' title='Calcola puntatore se dato alfabetico' >
															<exp exp='Puntatore_char_sx = (CHAR_SX - 0x40) * 5 + (5 * 9)' />
														</command>
													</flowline>
												</command>
											</flowline>
											<flowline >
												<command class_type='decision' title='Forse minore di 0?' exp='CHAR_SX &lt; &apos;0&apos;' swap='0' >
													<flowline >
														<command class_type='calculation' title='Se carattere minore di 0 forzalo ad un punto di domanda' >
															<exp exp='Puntatore_char_sx = Punto_Interrogativo' />
															<exp exp='' />
														</command>
													</flowline>
													<flowline >
														<command class_type='decision' title='Decisione' exp='CHAR_SX &gt; &apos;9&apos;' swap='0' >
															<flowline >
																<command class_type='calculation' title='Se carattere maggiore di 9  forzalo ad un punto di domanda' >
																	<exp exp='Puntatore_char_sx = Punto_Interrogativo' />
																</command>
															</flowline>
															<flowline >
																<command class_type='calculation' title='calcola puntatore carattere sinistro del display se dato numeric' >
																	<exp exp='Puntatore_char_sx = (CHAR_SX - 0x30) * 5' />
																</command>
															</flowline>
														</command>
													</flowline>
												</command>
											</flowline>
										</command>
									</flowline>
								</command>
							</flowline>
						</command>
						<command class_type='decision' title='Intercettiamo caratteri speciali' exp='CHAR_DX = &apos;!&apos;' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Puntatore_char_dx = Punto_Esclamativo' />
								</command>
							</flowline>
							<flowline >
								<command class_type='decision' title='Decisione' exp='CHAR_DX = &apos; &apos;' swap='0' >
									<flowline >
										<command class_type='calculation' title='Calcolo' >
											<exp exp='Puntatore_char_dx = Blank' />
										</command>
									</flowline>
									<flowline >
										<command class_type='decision' title='Decisione' exp='CHAR_DX &gt;= &apos;A&apos;' swap='0' >
											<flowline >
												<command class_type='calculation' title='Se carattere alfabetic DX  minuscolo lo forza maiuscolo' >
													<exp exp='CHAR_DX = CHAR_DX &amp; 0x5F' />
												</command>
												<command class_type='decision' title='Forse dx maggiore di &apos;Z&apos;?' exp='CHAR_DX &gt; &apos;Z&apos;' swap='0' >
													<flowline >
														<command class_type='calculation' title='Se carattere maggiore della Z scriverai un punto di domanda' >
															<exp exp='Puntatore_char_dx = Punto_Interrogativo' />
															<exp exp='' />
														</command>
													</flowline>
													<flowline >
														<command class_type='calculation' title='Calcola puntatore se dato alfabetico' >
															<exp exp='Puntatore_char_dx = (CHAR_DX - 0x40) * 5 + (5 * 9)' />
														</command>
													</flowline>
												</command>
											</flowline>
											<flowline >
												<command class_type='decision' title='Forse dx minore di &apos;0&apos;' exp='CHAR_DX &lt; &apos;0&apos;' swap='0' >
													<flowline >
														<command class_type='calculation' title='Se carattere minore di 0 forzalo ad un punto di domanda' >
															<exp exp='Puntatore_char_dx = Punto_Interrogativo' />
														</command>
													</flowline>
													<flowline >
														<command class_type='decision' title='Decisione' exp='CHAR_DX &gt; &apos;9&apos;' swap='0' >
															<flowline >
																<command class_type='calculation' title='Se carattere maggiore di 9  forzalo ad un punto di domanda' >
																	<exp exp='Puntatore_char_dx = Punto_Interrogativo' />
																	<exp exp='' />
																</command>
															</flowline>
															<flowline >
																<command class_type='calculation' title='calcola puntatore carattere destro del display se dato numerico' >
																	<exp exp='Puntatore_char_dx = (CHAR_DX - 0x30) * 5' />
																</command>
															</flowline>
														</command>
													</flowline>
												</command>
											</flowline>
										</command>
									</flowline>
								</command>
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Scrivi_Display' description='Scrive il dato di destra e sinistra' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='call' title='Chiamata Macro' macro='Init_max_219' />
						<command class_type='calculation' title='inizializza il puntatore in tabella caratteri' >
							<exp exp='PointerTabella = 0' />
						</command>
						<command class_type='call' title='Chiamata Macro' macro='Clear_Riga_1' />
						<command class_type='calculation' title='Calcolo' >
							<exp exp='Puntatore_al_dato = Puntatore_char_sx' />
						</command>
						<command class_type='calculation' title='inizializza contatore righe' >
							<exp exp='Counter_Riga = 1' />
						</command>
						<command class_type='decision' title='forse scrivere simbolo strano?' disable='1' exp='Puntatore_al_dato = Show_standby' swap='0' >
							<flowline >
								<command class_type='calculation' title='si scrive dalla quinta riga' >
									<exp exp='Counter_Riga = 5' />
								</command>
							</flowline>
							<flowline />
						</command>
						<command class_type='label' title='Punto di connessione' labelid='0' labelname='A' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Preleva il dato di riga dalla tabella' component='tabella_caratteri' macro='GetInt' >
							<return exp='Dato_della_riga' />
							<argument exp='Puntatore_char_dx' />
						</command>
						<command class_type='comment' title='' comment='Ora scriviamo sui displays' textarea='12,0,12,0' />
						<command class_type='comment' title='' comment='Carattere Destro' textarea='12,0,12,0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Counter_Riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='comment' title='' comment='Carattere sinistro' textarea='83,13,83,13' />
						<command class_type='call' title='Preleva il dato di riga dalla tabella' component='tabella_caratteri' macro='GetInt' >
							<return exp='Dato_della_riga' />
							<argument exp='Puntatore_char_sx' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Counter_Riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Memorizza (Alza Load)' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='calculation' title='Incrementa il puntatore alla riga' >
							<exp exp='Puntatore_al_dato = Puntatore_al_dato + 1' />
							<exp exp='Puntatore_char_sx = Puntatore_char_sx + 1' />
							<exp exp='Puntatore_char_dx = Puntatore_char_dx + 1' />
						</command>
						<command class_type='calculation' title='Incrementa counter colonna' >
							<exp exp='Counter_Riga = Counter_Riga + 1' />
						</command>
						<command class_type='decision' title='Decisione' exp='Counter_Riga &lt;= 6' swap='0' >
							<flowline >
								<command class_type='goto' title='Vai a Punto di Connessione' labelid='0' labelname='' />
							</flowline>
							<flowline />
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Clear_display' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='calculation' title='Inizializza la colonna' >
							<exp exp='PointerTabella = 1' />
						</command>
						<command class_type='calculation' title='Inizializzail dato da inviare' >
							<exp exp='Dato_della_riga = 0' />
						</command>
						<command class_type='calculation' title='Calcolo' >
							<exp exp='Counter_colonne = 0' />
						</command>
						<command class_type='label' title='Punto di connessione' labelid='0' labelname='A' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='PointerTabella' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='calculation' title='Incrementa il puntatore alla colonna' >
							<exp exp='PointerTabella = PointerTabella + 1' />
						</command>
						<command class_type='decision' title='Decisione' exp='PointerTabella &lt;= 7' swap='0' >
							<flowline >
								<command class_type='goto' title='Vai a Punto di Connessione' labelid='0' labelname='' />
							</flowline>
							<flowline />
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='From_address_to_chars' description='trasforma l&apos;indirizzo in caratteri da stampare per indicare che indirizzo è stato impostato' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='decision' title='Decisione' exp='address = 0' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='CHAR_SX = &apos;0&apos;' />
									<exp exp='CHAR_DX = &apos;0&apos;' />
								</command>
							</flowline>
							<flowline >
								<command class_type='decision' title='Decisione' exp='Address = 1' swap='0' >
									<flowline >
										<command class_type='calculation' title='Calcolo' >
											<exp exp='CHAR_SX = &apos;0&apos;' />
											<exp exp='CHAR_DX = &apos;1&apos;' />
										</command>
									</flowline>
									<flowline >
										<command class_type='decision' title='Decisione' exp='Address = 2' swap='0' >
											<flowline >
												<command class_type='calculation' title='Calcolo' >
													<exp exp='CHAR_SX = &apos;0&apos;' />
													<exp exp='CHAR_DX = &apos;2&apos;' />
												</command>
											</flowline>
											<flowline >
												<command class_type='decision' title='Decisione' exp='Address = 3' swap='0' >
													<flowline >
														<command class_type='calculation' title='Calcolo' >
															<exp exp='CHAR_SX = &apos;0&apos;' />
															<exp exp='CHAR_DX = &apos;3&apos;' />
														</command>
													</flowline>
													<flowline >
														<command class_type='decision' title='Decisione' exp='Address = 4' swap='0' >
															<flowline >
																<command class_type='calculation' title='Calcolo' >
																	<exp exp='CHAR_SX = &apos;0&apos;' />
																	<exp exp='CHAR_DX = &apos;4&apos;' />
																</command>
															</flowline>
															<flowline >
																<command class_type='decision' title='Decisione' exp='Address = 5' swap='0' >
																	<flowline >
																		<command class_type='calculation' title='Calcolo' >
																			<exp exp='CHAR_SX = &apos;0&apos;' />
																			<exp exp='CHAR_DX = &apos;5&apos;' />
																		</command>
																	</flowline>
																	<flowline >
																		<command class_type='decision' title='Decisione' exp='Address = 6' swap='0' >
																			<flowline >
																				<command class_type='calculation' title='Calcolo' >
																					<exp exp='CHAR_SX = &apos;0&apos;' />
																					<exp exp='CHAR_DX = &apos;6&apos;' />
																				</command>
																			</flowline>
																			<flowline >
																				<command class_type='decision' title='Decisione' exp='Address = 7' swap='0' >
																					<flowline >
																						<command class_type='calculation' title='Calcolo' >
																							<exp exp='CHAR_SX = &apos;0&apos;' />
																							<exp exp='CHAR_DX = &apos;7&apos;' />
																						</command>
																					</flowline>
																					<flowline >
																						<command class_type='decision' title='Decisione' exp='Address = 8' swap='0' >
																							<flowline >
																								<command class_type='calculation' title='Calcolo' >
																									<exp exp='CHAR_SX = &apos;0&apos;' />
																									<exp exp='CHAR_DX = &apos;8&apos;' />
																								</command>
																							</flowline>
																							<flowline >
																								<command class_type='decision' title='Decisione' exp='Address = 9' swap='0' >
																									<flowline >
																										<command class_type='calculation' title='Calcolo' >
																											<exp exp='CHAR_SX = &apos;0&apos;' />
																											<exp exp='CHAR_DX = &apos;9&apos;' />
																										</command>
																									</flowline>
																									<flowline >
																										<command class_type='decision' title='Decisione' exp='Address = 10' swap='0' >
																											<flowline >
																												<command class_type='calculation' title='Calcolo' >
																													<exp exp='CHAR_SX = &apos;1&apos;' />
																													<exp exp='CHAR_DX = &apos;0&apos;' />
																												</command>
																											</flowline>
																											<flowline >
																												<command class_type='decision' title='Decisione' exp='Address = 11' swap='0' >
																													<flowline >
																														<command class_type='calculation' title='Calcolo' >
																															<exp exp='CHAR_SX = &apos;1&apos;' />
																															<exp exp='CHAR_DX = &apos;1&apos;' />
																														</command>
																													</flowline>
																													<flowline >
																														<command class_type='decision' title='Decisione' exp='Address = 12' swap='0' >
																															<flowline >
																																<command class_type='calculation' title='Calcolo' >
																																	<exp exp='CHAR_SX = &apos;1&apos;' />
																																	<exp exp='CHAR_DX = &apos;2&apos;' />
																																</command>
																															</flowline>
																															<flowline >
																																<command class_type='decision' title='Decisione' exp='Address = 13' swap='0' >
																																	<flowline >
																																		<command class_type='calculation' title='Calcolo' >
																																			<exp exp='CHAR_SX = &apos;1&apos;' />
																																			<exp exp='CHAR_DX = &apos;3&apos;' />
																																		</command>
																																	</flowline>
																																	<flowline >
																																		<command class_type='decision' title='Decisione' exp='Address = 14' swap='0' >
																																			<flowline >
																																				<command class_type='calculation' title='Calcolo' >
																																					<exp exp='CHAR_SX = &apos;1&apos;' />
																																					<exp exp='CHAR_DX = &apos;4&apos;' />
																																				</command>
																																			</flowline>
																																			<flowline >
																																				<command class_type='decision' title='Decisione' exp='Address = 15' swap='0' >
																																					<flowline >
																																						<command class_type='calculation' title='Calcolo' >
																																							<exp exp='CHAR_SX = &apos;1&apos;' />
																																							<exp exp='CHAR_DX = &apos;5&apos;' />
																																						</command>
																																					</flowline>
																																					<flowline >
																																						<command class_type='decision' title='Decisione' exp='address = 16' swap='0' >
																																							<flowline >
																																								<command class_type='calculation' title='Calcolo' >
																																									<exp exp='CHAR_SX = &apos;1&apos;' />
																																									<exp exp='CHAR_DX = &apos;6&apos;' />
																																								</command>
																																							</flowline>
																																							<flowline >
																																								<command class_type='decision' title='Decisione' exp='Address = 17' swap='0' >
																																									<flowline >
																																										<command class_type='calculation' title='Calcolo' >
																																											<exp exp='CHAR_SX = &apos;1&apos;' />
																																											<exp exp='CHAR_DX = &apos;7&apos;' />
																																										</command>
																																									</flowline>
																																									<flowline >
																																										<command class_type='decision' title='Decisione' exp='Address = 18' swap='0' >
																																											<flowline >
																																												<command class_type='calculation' title='Calcolo' >
																																													<exp exp='CHAR_SX = &apos;1&apos;' />
																																													<exp exp='CHAR_DX = &apos;8&apos;' />
																																												</command>
																																											</flowline>
																																											<flowline >
																																												<command class_type='decision' title='Decisione' exp='Address = 19' swap='0' >
																																													<flowline >
																																														<command class_type='calculation' title='Calcolo' >
																																															<exp exp='CHAR_SX = &apos;1&apos;' />
																																															<exp exp='CHAR_DX = &apos;9&apos;' />
																																														</command>
																																													</flowline>
																																													<flowline >
																																														<command class_type='decision' title='Decisione' exp='Address = 20' swap='0' >
																																															<flowline >
																																																<command class_type='calculation' title='Calcolo' >
																																																	<exp exp='CHAR_SX = &apos;2&apos;' />
																																																	<exp exp='CHAR_DX = &apos;0&apos;' />
																																																</command>
																																															</flowline>
																																															<flowline >
																																																<command class_type='decision' title='Decisione' exp='Address = 21' swap='0' >
																																																	<flowline >
																																																		<command class_type='calculation' title='Calcolo' >
																																																			<exp exp='CHAR_SX = &apos;2&apos;' />
																																																			<exp exp='CHAR_DX = &apos;1&apos;' />
																																																		</command>
																																																	</flowline>
																																																	<flowline >
																																																		<command class_type='decision' title='Decisione' exp='Address = 22' swap='0' >
																																																			<flowline >
																																																				<command class_type='calculation' title='Calcolo' >
																																																					<exp exp='CHAR_SX = &apos;2&apos;' />
																																																					<exp exp='CHAR_DX = &apos;2&apos;' />
																																																				</command>
																																																			</flowline>
																																																			<flowline >
																																																				<command class_type='decision' title='Decisione' exp='Address = 23' swap='0' >
																																																					<flowline >
																																																						<command class_type='calculation' title='Calcolo' >
																																																							<exp exp='CHAR_SX = &apos;2&apos;' />
																																																							<exp exp='CHAR_DX = &apos;3&apos;' />
																																																						</command>
																																																					</flowline>
																																																					<flowline >
																																																						<command class_type='decision' title='Decisione' exp='Address = 24' swap='0' >
																																																							<flowline >
																																																								<command class_type='calculation' title='Calcolo' >
																																																									<exp exp='CHAR_SX = &apos;2&apos;' />
																																																									<exp exp='CHAR_DX = &apos;4&apos;' />
																																																								</command>
																																																							</flowline>
																																																							<flowline >
																																																								<command class_type='decision' title='Decisione' exp='Address = 25' swap='0' >
																																																									<flowline >
																																																										<command class_type='calculation' title='Calcolo' >
																																																											<exp exp='CHAR_SX = &apos;2&apos;' />
																																																											<exp exp='CHAR_DX = &apos;5&apos;' />
																																																										</command>
																																																									</flowline>
																																																									<flowline >
																																																										<command class_type='decision' title='Decisione' exp='Address = 26' swap='0' >
																																																											<flowline >
																																																												<command class_type='calculation' title='Calcolo' >
																																																													<exp exp='CHAR_SX = &apos;2&apos;' />
																																																													<exp exp='CHAR_DX = &apos;6&apos;' />
																																																												</command>
																																																											</flowline>
																																																											<flowline >
																																																												<command class_type='decision' title='Decisione' exp='Address = 27' swap='0' >
																																																													<flowline >
																																																														<command class_type='calculation' title='Calcolo' >
																																																															<exp exp='CHAR_SX = &apos;2&apos;' />
																																																															<exp exp='CHAR_DX = &apos;7&apos;' />
																																																														</command>
																																																													</flowline>
																																																													<flowline >
																																																														<command class_type='decision' title='Decisione' exp='Address = 28' swap='0' >
																																																															<flowline >
																																																																<command class_type='calculation' title='Calcolo' >
																																																																	<exp exp='CHAR_SX = &apos;2&apos;' />
																																																																	<exp exp='CHAR_DX = &apos;8&apos;' />
																																																																</command>
																																																															</flowline>
																																																															<flowline >
																																																																<command class_type='decision' title='Decisione' exp='Address = 29' swap='0' >
																																																																	<flowline >
																																																																		<command class_type='calculation' title='Calcolo' >
																																																																			<exp exp='CHAR_SX = &apos;2&apos;' />
																																																																			<exp exp='CHAR_DX = &apos;9&apos;' />
																																																																		</command>
																																																																	</flowline>
																																																																	<flowline >
																																																																		<command class_type='decision' title='Decisione' exp='Address = 30' swap='0' >
																																																																			<flowline >
																																																																				<command class_type='calculation' title='Calcolo' >
																																																																					<exp exp='CHAR_SX = &apos;3&apos;' />
																																																																					<exp exp='CHAR_DX = &apos;0&apos;' />
																																																																				</command>
																																																																			</flowline>
																																																																			<flowline >
																																																																				<command class_type='decision' title='Decisione' exp='Address = 31' swap='0' >
																																																																					<flowline >
																																																																						<command class_type='calculation' title='Calcolo' >
																																																																							<exp exp='CHAR_SX = &apos;3&apos;' />
																																																																							<exp exp='CHAR_DX = &apos;1&apos;' />
																																																																						</command>
																																																																					</flowline>
																																																																					<flowline />
																																																																				</command>
																																																																			</flowline>
																																																																		</command>
																																																																	</flowline>
																																																																</command>
																																																															</flowline>
																																																														</command>
																																																													</flowline>
																																																												</command>
																																																											</flowline>
																																																										</command>
																																																									</flowline>
																																																								</command>
																																																							</flowline>
																																																						</command>
																																																					</flowline>
																																																				</command>
																																																			</flowline>
																																																		</command>
																																																	</flowline>
																																																</command>
																																															</flowline>
																																														</command>
																																													</flowline>
																																												</command>
																																											</flowline>
																																										</command>
																																									</flowline>
																																								</command>
																																							</flowline>
																																						</command>
																																					</flowline>
																																				</command>
																																			</flowline>
																																		</command>
																																	</flowline>
																																</command>
																															</flowline>
																														</command>
																													</flowline>
																												</command>
																											</flowline>
																										</command>
																									</flowline>
																								</command>
																							</flowline>
																						</command>
																					</flowline>
																				</command>
																			</flowline>
																		</command>
																	</flowline>
																</command>
															</flowline>
														</command>
													</flowline>
												</command>
											</flowline>
										</command>
									</flowline>
								</command>
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Gest_Timeout' description='Gestisce il time-out di ricezione dei caratteri tramite il timer o ed in relazione alla fase in cui si trova di attesa caratteri dalla seriale.
Questo fa in modo chese gli arriva un solo carattere oppure solo 2 caratteri dalla seriale, dopo un po&apos; d' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='decision' title='Abilitato ad avviare max tempo disponibile?' exp='Start_timeout = 1' swap='0' >
							<flowline >
								<command class_type='decision' title='Decisione' exp='Counter_time_rec_chars &gt;= Clock_Int' swap='1' >
									<flowline >
										<command class_type='calculation' title='Incrementa il tempo' >
											<exp exp='Counter_time_rec_chars = Counter_time_rec_chars + 1' />
										</command>
									</flowline>
									<flowline >
										<command class_type='calculation' title='predispone per puntare nuovamente a ricevere il primo carattere' >
											<exp exp='Counter_chars_received = 0' />
										</command>
										<command class_type='calculation' title='Il nostro compito si esaurisce qui' >
											<exp exp='Start_timeout = 0' />
										</command>
									</flowline>
								</command>
							</flowline>
							<flowline >
								<command class_type='calculation' title='Ripristina il timer per ilprossimo giro' disable='1' >
									<exp exp='Counter_time_rec_chars = 0' />
								</command>
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Riceve_3_Chars' description='Questa macro riempie il buffer dei tre caratteri ricevuti e setta il flag di Buffer pronto alla stampa' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='call' title='Chiamata Macro Componente' component='RS232' macro='ReceiveChar' >
							<return exp='Primo_char_ricevuto' />
							<argument exp='1' />
						</command>
						<command class_type='decision' title='Decisione' exp='Primo_char_ricevuto &lt; 255' swap='0' >
							<flowline />
							<flowline />
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Memorizza_address' description='All&apos;accensione unadelle prime cose che si fa è quella di memorizzare l&apos;indirizzo del dispositivo leggendo gli ingressi adibiti' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='input' title='Ingresso' mode='1' port='1048577' mask='32' exp='Bit_1_Codice' />
						<command class_type='decision' title='Decisione' exp='Bit_1_Codice = 1' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = address | 0x01' />
								</command>
							</flowline>
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = Address &amp; 0xFE' />
								</command>
							</flowline>
						</command>
						<command class_type='input' title='Ingresso' mode='1' port='1048576' mask='64' exp='Bit_2_Codice' />
						<command class_type='decision' title='Decisione' exp='Bit_2_Codice = 1' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = address | 0x02' />
								</command>
							</flowline>
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = Address &amp; 0xFD' />
								</command>
							</flowline>
						</command>
						<command class_type='input' title='Ingresso' mode='1' port='1048576' mask='128' exp='Bit_4_Codice' />
						<command class_type='decision' title='Decisione' exp='Bit_4_Codice = 1' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = address | 0x04' />
								</command>
							</flowline>
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = Address &amp; 0xFB' />
								</command>
							</flowline>
						</command>
						<command class_type='input' title='Ingresso' mode='1' port='1048577' mask='8' exp='Bit_8_Codice' />
						<command class_type='decision' title='Decisione' exp='Bit_8_Codice = 1' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = address | 0x08' />
								</command>
							</flowline>
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = Address &amp; 0xF7' />
								</command>
							</flowline>
						</command>
						<command class_type='input' title='Ingresso' mode='1' port='1048577' mask='128' exp='Bit_16_Codice' />
						<command class_type='decision' title='Decisione' exp='Bit_16_Codice = 1' swap='0' >
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = address | 0x10' />
								</command>
							</flowline>
							<flowline >
								<command class_type='calculation' title='Calcolo' >
									<exp exp='Address = Address &amp; 0xEF' />
								</command>
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Scrivi_Display_DX' description='Scrive solo il display di destra' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='calculation' title='inizializza il puntatore in tabella caratteri' >
							<exp exp='PointerTabella = 0' />
						</command>
						<command class_type='call' title='Cancella la prima riga in basso del display' disable='1' macro='Clear_Riga_1' />
						<command class_type='calculation' title='Calcolo' >
							<exp exp='Puntatore_al_dato = Puntatore_char_dx' />
						</command>
						<command class_type='calculation' title='inizializza contatore righe' >
							<exp exp='Counter_Riga = 1' />
						</command>
						<command class_type='decision' title='forse scrivere simbolo strano?' disable='1' exp='Puntatore_al_dato = Show_standby' swap='0' >
							<flowline >
								<command class_type='calculation' title='si scrive dalla quinta riga' >
									<exp exp='Counter_Riga = 5' />
								</command>
							</flowline>
							<flowline />
						</command>
						<command class_type='label' title='Punto di connessione' labelid='0' labelname='A' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Preleva il dato di riga dalla tabella' component='tabella_caratteri' macro='GetInt' >
							<return exp='Dato_della_riga' />
							<argument exp='Puntatore_al_dato' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Counter_Riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0b00000000' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0b00000000' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='calculation' title='Incrementa il puntatore alla riga' >
							<exp exp='Puntatore_al_dato = Puntatore_al_dato + 1' />
						</command>
						<command class_type='calculation' title='Incrementa counter colonna' >
							<exp exp='Counter_Riga = Counter_Riga + 1' />
						</command>
						<command class_type='decision' title='Decisione' exp='Counter_Riga &lt;= 6' swap='0' >
							<flowline >
								<command class_type='goto' title='Vai a Punto di Connessione' labelid='0' labelname='' />
							</flowline>
							<flowline />
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Main' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='native' title='Codice C' ccode='/*
  Inserisci il codice C qui sotto
*/
   osccon=0x70;

' language='C' />
						<command class_type='calculation' title='carica timer per INT' >
							<exp exp='Clock_Int = 150' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='RS232' macro='Initialise' />
						<command class_type='output' title='AAbilita 422 alla ricezione' mode='1' port='1048577' mask='64' exp='0' />
						<command class_type='output' title='Spegne LED monitor' mode='1' port='1048576' mask='16' exp='1' />
						<command class_type='call' title='Call Component Macro' component='SPI_Master1' macro='Initialise' />
						<command class_type='call' title='Chiamata Macro' macro='Init_max_219' />
						<command class_type='call' title='Chiamata Macro' macro='Clear_display' />
						<command class_type='delay' title='Ritardo' exp='50' type='1' />
						<command class_type='comment' title='' comment='Fine inizializzazione displays' textarea='12,0,12,0' disable='1' />
						<command class_type='calculation' title='Azzera counter di caratteri ricevuti' >
							<exp exp='Counter_chars_received = 0' />
						</command>
						<command class_type='call' title='Ricava address dagli switces' macro='Memorizza_address' />
						<command class_type='call' title='Ne ricava l&apos;indirizzo' macro='From_address_to_chars' />
						<command class_type='call' title='E lo scrive sul display' macro='Da_Char_a_Puntatore' />
						<command class_type='call' title='Chiamata Macro' macro='Scrivi_Display_DX' />
						<command class_type='call' title='Chiamata Macro' macro='Scrivi_Display_SX' />
						<command class_type='comment' title='' comment='&quot; secondi per visualizzare indirizzo del dispositivo' textarea='12,0,12,0' />
						<command class_type='delay' title='Ritardo' exp='2' type='2' />
						<command class_type='call' title='Chiamata Macro' macro='Init_max_219' />
						<command class_type='call' title='Chiamata Macro' macro='Clear_display' />
						<command class_type='calculation' title='Se carattere minore di 0 forzalo ad un simbolo strano' >
							<exp exp='Puntatore_char_sx = Show_standby' />
						</command>
						<command class_type='call' title='Chiamata Macro' macro='Scrivi_Display_SX' />
						<command class_type='calculation' title='Se carattere minore di 0 forzalo ad un simbolo strano' >
							<exp exp='Puntatore_char_dx = Show_standby' />
						</command>
						<command class_type='call' title='Chiamata Macro' macro='Scrivi_Display_DX' />
						<command class_type='output' title='Uscita spegne led monitor' mode='1' port='1048576' mask='16' exp='1' />
						<command class_type='interrupt' title='Interrupt' disable='1' enable='1' name='TMR2' call='Gest_Timeout' >
							<settings timer='1' prescale='16' postscale='16' rollover='256' bitcount='-1' trigger='3' maskhi='--------------------------------------------------------------------------------------------------------------------------------------------------------------------------8' masklo='--------------------------------------------------------------------------------------------------------------------------------------------------------------------------8' >
								<option value='2' />
								<option value='15' />
								<option value='256' />
								<option value='-1' />
							</settings>
						</command>
						<command class_type='loop' title='Loop' type='0' exp='1' >
							<flowline >
								<command class_type='switch' title='attesa caratteri' textarea='36,25,36,25' exp='Counter_chars_received' >
									<case >
										<flowline >
											<command class_type='call' title='Chiamata Macro Componente' component='RS232' macro='ReceiveChar' >
												<return exp='Char_ricevuto' />
												<argument exp='255' />
											</command>
											<command class_type='decision' title='Decisione' exp='Char_ricevuto &lt; 255' swap='0' >
												<flowline >
													<command class_type='decision' title='Primo carattere ricevuto è l&apos;indirizzo del dispositivo?' exp='Char_ricevuto = Address' swap='1' >
														<flowline />
														<flowline >
															<command class_type='calculation' title='Calcolo' >
																<exp exp='CHAR_ADDRESS = Char_ricevuto' />
															</command>
															<command class_type='calculation' title='Punta a ricevere il carattere terzo' >
																<exp exp='Counter_chars_received = 1' />
															</command>
															<command class_type='calculation' title='Azzera il timer massimo per ricevere i Chars' >
																<exp exp='Counter_time_rec_chars = 0' />
															</command>
															<command class_type='calculation' title='Fa partire timeout per ricevere caratteri' >
																<exp exp='Start_timeout = 1' />
															</command>
														</flowline>
													</command>
												</flowline>
												<flowline />
											</command>
										</flowline>
									</case>
									<case exp='Attesa_char_sx' >
										<flowline >
											<command class_type='call' title='Chiamata Macro Componente' component='RS232' macro='ReceiveChar' >
												<return exp='Char_ricevuto' />
												<argument exp='255' />
											</command>
											<command class_type='decision' title='Decisione' exp='Char_ricevuto &lt; 255' swap='0' >
												<flowline >
													<command class_type='decision' title='Se secondo carattere ricevuto = indirizzo ricomincio da capo' exp='Char_ricevuto = Address' swap='0' >
														<flowline >
															<command class_type='calculation' title='Stoppa l&apos;avanzamento del timer' >
																<exp exp='Start_timeout = 0' />
															</command>
															<command class_type='calculation' title='Azzera il timer massimo per ricevere i Chars' >
																<exp exp='Counter_time_rec_chars = 0' />
															</command>
															<command class_type='calculation' title='Indirizzo non mio, aspettiamo la nostra terna' >
																<exp exp='Counter_chars_received = 0' />
															</command>
														</flowline>
														<flowline >
															<command class_type='calculation' title='Calcolo' >
																<exp exp='CHAR_SX = Char_ricevuto' />
															</command>
															<command class_type='calculation' title='Punta a ricevere il carattere terzo' >
																<exp exp='Counter_chars_received = 2' />
															</command>
														</flowline>
													</command>
												</flowline>
												<flowline />
											</command>
										</flowline>
									</case>
									<case exp='Attesa_char_dx' >
										<flowline >
											<command class_type='call' title='Chiamata Macro Componente' component='RS232' macro='ReceiveChar' >
												<return exp='Char_ricevuto' />
												<argument exp='255' />
											</command>
											<command class_type='decision' title='Decisione' exp='Char_ricevuto &lt; 255' swap='0' >
												<flowline >
													<command class_type='decision' title='Se terzo char= indirizzo, ricomincio da capo' exp='Terzo_char_ricevuto = Address' swap='0' >
														<flowline >
															<command class_type='calculation' title='Stoppa l&apos;avanzamento del timer' >
																<exp exp='Start_timeout = 0' />
															</command>
															<command class_type='calculation' title='Azzera il timer massimo per ricevere i Chars' >
																<exp exp='Counter_time_rec_chars = 0' />
															</command>
															<command class_type='calculation' title='Indirizzo non mio, aspettiamo la nostra terna' >
																<exp exp='Counter_chars_received = 0' />
															</command>
														</flowline>
														<flowline >
															<command class_type='calculation' title='Calcolo' >
																<exp exp='CHAR_DX = Char_ricevuto' />
															</command>
															<command class_type='call' title='Dai caratteri ricevuti ricava i puntatori per scriverli' macro='Da_Char_a_Puntatore' />
															<command class_type='call' title='Chiamata Macro' macro='Scrivi_Display' />
															<command class_type='calculation' title='Abbiamo scritto i due displays riazzeriamo ed usciamo' >
																<exp exp='Counter_chars_received = 0' />
															</command>
															<command class_type='calculation' title='Stoppa l&apos;avanzamento del timer' >
																<exp exp='Start_timeout = 0' />
															</command>
														</flowline>
													</command>
												</flowline>
												<flowline />
											</command>
										</flowline>
									</case>
								</command>
								<command class_type='output' title='Spegne led Monitor' mode='1' port='1048576' mask='16' exp='!Start_timeout' />
							</flowline>
						</command>
					</flowline>
				</macro>
				<macro >
					<flowline name='Scrivi_Display_SX' description='' >
						<return name='Return' type='v0' description='' isconst='0' isinit='0' usrinit='' setinit='' />
						<command class_type='calculation' title='inizializza il puntatore in tabella caratteri' >
							<exp exp='PointerTabella = 0' />
						</command>
						<command class_type='call' title='Chiamata Macro' disable='1' macro='Clear_Riga_1' />
						<command class_type='calculation' title='Calcolo' >
							<exp exp='Puntatore_al_dato = Puntatore_char_sx' />
						</command>
						<command class_type='calculation' title='inizializza contatore righe' >
							<exp exp='Counter_Riga = 1' />
						</command>
						<command class_type='decision' title='forse scrivere simbolo strano?' disable='1' exp='Puntatore_al_dato = Show_standby' swap='0' >
							<flowline >
								<command class_type='calculation' title='si scrive dalla quinta riga' >
									<exp exp='Counter_Riga = 5' />
								</command>
							</flowline>
							<flowline />
						</command>
						<command class_type='label' title='Punto di connessione' labelid='0' labelname='A' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Abbassa Load' mode='1' port='1048576' mask='8' exp='0' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0b00000000' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='0b00000000' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='call' title='Preleva il dato di riga dalla tabella' component='tabella_caratteri' macro='GetInt' >
							<return exp='Dato_della_riga' />
							<argument exp='Puntatore_al_dato' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Counter_Riga' />
						</command>
						<command class_type='call' title='Chiamata Macro Componente' component='SPI_Master1' macro='SendChar' >
							<argument exp='Dato_della_riga' />
						</command>
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='output' title='Alza Load' mode='1' port='1048576' mask='8' exp='1' />
						<command class_type='delay' title='Ritardo' exp='200' type='0' />
						<command class_type='calculation' title='Incrementa il puntatore alla riga' >
							<exp exp='Puntatore_al_dato = Puntatore_al_dato + 1' />
						</command>
						<command class_type='calculation' title='Incrementa counter colonna' >
							<exp exp='Counter_Riga = Counter_Riga + 1' />
						</command>
						<command class_type='decision' title='Decisione' exp='Counter_Riga &lt;= 6' swap='0' >
							<flowline >
								<command class_type='goto' title='Vai a Punto di Connessione' labelid='0' labelname='' />
							</flowline>
							<flowline />
						</command>
					</flowline>
				</macro>
			</macros>
			<component class_type='ref' guid='dfb4d07a-3d70-45d5-83ef-07e3c95d86ab' vmin='4' vmaj='1' codename='tabella_caratteri' x='72' y='32' z='0' xsz='25' ysz='25' zsz='25' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='intfixed' data='0x3E,0x51,0x49,0x45,0x3E,
0x00,0x42,0x7F,0x40,0x00,
0x42,0x61,0x51,0x49,0x46,
0x21,0x41,0x45,0x4B,0x31,
0x18,0x14,0x12,0x7F,0x10,
0x27,0x45,0x45,0x45,0x39,
0x3C,0x4A,0x49,0x49,0x30,
0x01,0x71,0x09,0x05,0x03,
0x36,0x49,0x49,0x49,0x36,
0x06,0x49,0x49,0x29,0x1E,
0x7E,0x11,0x11,0x11,0x7E,
0x7F,0x49,0x49,0x49,0x36,
0x3E,0x41,0x41,0x41,0x22,
0x7F,0x41,0x41,0x22,0x1C,
0x7F,0x49,0x49,0x49,0x41,
0x7F,0x09,0x09,0x09,0x01,
0x3E,0x41,0x49,0x49,0x7A,
0x7F,0x08,0x08,0x08,0x7F,
0x00,0x41,0x7F,0x41,0x00,
0x20,0x40,0x41,0x3F,0x01,
0x7F,0x08,0x14,0x22,0x41,
0x7F,0x40,0x40,0x40,0x40,
0x7F,0x02,0x0C,0x02,0x7F,
0x7F,0x04,0x08,0x10,0x7F,
0x3E,0x41,0x41,0x41,0x3E,
0x7F,0x09,0x09,0x09,0x06,
0x3E,0x41,0x51,0x21,0x5E,
0x7F,0x09,0x19,0x29,0x46,
0x46,0x49,0x49,0x49,0x31,
0x01,0x01,0x7F,0x01,0x01,
0x3F,0x40,0x40,0x40,0x3F,
0x1F,0x20,0x40,0x20,0x1F,
0x3F,0x40,0x38,0x40,0x3F,
0x63,0x14,0x08,0x14,0x63,
0x07,0x08,0x70,0x08,0x07,
0x61,0x51,0x49,0x45,0x43,
0x00,0x00,0x5F,0x00,0x00,
0x02,0x01,0x51,0x09,0x06,
0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x08,0x00,0x00,' />
					<value target='floatfixed' data='' />
					<value target='fixedexp' data='0' />
					<value target='EmbedIntoC' data='1' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='c73616d1-7ad0-45d9-aada-69ccfa4c5efc' vmin='3' vmaj='1' codename='RS232' x='0' y='0' z='0' xsz='60' ysz='26' zsz='1.51' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='0' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='CHANNEL' data='001' />
					<value target='BAUD_LIST' data='004' />
					<value target='BAUD' data='9600' />
					<value target='DBITS' data='008' />
					<value target='RETURN' data='000' />
					<value target='ToutVal' data='255' />
					<value target='FLOWEN' data='000' />
					<value target='ECHO' data='000' />
					<value target='TX' data='$PORTB.1' />
					<value target='RX' data='$PORTB.4' />
					<value target='CTS' data='$PORTB.1' />
					<value target='RTS' data='$PORTB.2' />
					<value target='TXRemap' data='' />
					<value target='RXRemap' data='' />
					<value target='label' data='RS232' />
					<value target='ScopeTraces' data='0' />
					<value target='ConsoleData' data='0' />
					<value target='ConsoleColumns' data='64' />
					<value target='DataSource' data='001' />
					<value target='com_port' data='003' />
					<value target='Injector' data='000' />
					<value target='InjectorHandle' data='311' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='4ac72986-ad7d-49ce-afe5-9128831debc9' vmin='1' vmaj='1' codename='switch_array_slide2' x='52.6407' y='-36' z='4.14815' xsz='2.37037' ysz='2.37037' zsz='2.37037' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='1' poslock='1' >
				<resources />
				<properties />
				<values >
					<value target='count' data='4' />
					<value target='port' data='011' />
					<value target='pin0' data='$PORTB.5' />
					<value target='pin1' data='$PORTA.6' />
					<value target='pin2' data='$PORTA.7' />
					<value target='pin3' data='$PORTB.3' />
					<value target='pin4' data='' />
					<value target='pin5' data='' />
					<value target='pin6' data='' />
					<value target='pin7' data='' />
					<value target='debounce' data='0' />
					<value target='polarity' data='000' />
					<value target='align' data='000' />
					<value target='spacing' data='12.000000' />
					<value target='reverse' data='0' />
					<value target='show_labels' data='004' />
					<value target='label_color' data='16777215' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='7fdaec78-394e-4ec9-a578-4f1a12a12076' vmin='1' vmaj='1' codename='led_5mm_clip3' x='-80' y='24' z='-3.85' xsz='1' ysz='1' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='1' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='pin' data='$PORTA.1' />
					<value target='polarity' data='001' />
					<value target='on_color' data='8453975' />
					<value target='show_label' data='002' />
					<value target='label_property' data='pin' />
					<value target='label_color' data='16777215' />
					<value target='label_scale' data='1.000000' />
					<value target='label_auto_scale' data='0' />
					<value target='label_position' data='003' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='7fdaec78-394e-4ec9-a578-4f1a12a12076' vmin='1' vmaj='1' codename='led_5mm_clip6' x='-50' y='24' z='-3.85' xsz='1' ysz='1' zsz='1' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='1' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='pin' data='$PORTB.2' />
					<value target='polarity' data='001' />
					<value target='on_color' data='8453975' />
					<value target='show_label' data='002' />
					<value target='label_property' data='pin' />
					<value target='label_color' data='16777215' />
					<value target='label_scale' data='1.000000' />
					<value target='label_auto_scale' data='0' />
					<value target='label_position' data='003' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='96862c4d-debc-45fa-9433-74711a4b9a3b' vmin='3' vmaj='1' codename='SPI_Master1' x='0' y='0' z='0.755' xsz='60' ysz='26' zsz='1.51' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='1' poslock='0' >
				<resources />
				<properties />
				<values >
					<value target='CHANNEL' data='000' />
					<value target='PR_SCALE' data='016' />
					<value target='CKP' data='000' />
					<value target='CKE' data='001' />
					<value target='SMP' data='001' />
					<value target='MOSI' data='$PORTA.2' />
					<value target='MISO' data='$PORTA.5' />
					<value target='CLK' data='$PORTA.0' />
					<value target='MosiRemap' data='' />
					<value target='MisoRemap' data='' />
					<value target='ClkRemap' data='' />
					<value target='label' data='SPI  Master' />
					<value target='ScopeTraces' data='0' />
					<value target='ConsoleData' data='0' />
					<value target='Injector' data='000' />
					<value target='InjectorHandle' data='0' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
			<component class_type='ref' guid='8462ac99-ca8f-429b-953a-36dbe58ada72' vmin='4' vmaj='1' codename='pot_trim_finger1' x='-56' y='-16' z='2.4' xsz='11.8794' ysz='11.8794' zsz='16' xang='0' yang='0' zang='0' xquat='0' yquat='0' zquat='0' wquat='1' visible='1' interactive='1' solid='1' layer='1' poslock='1' >
				<resources />
				<properties />
				<values >
					<value target='angle_start' data='225.000000' />
					<value target='angle_sweep' data='270.000000' />
					<value target='color' data='16777215' />
					<value target='ScopeTraces' data='0' />
					<value target='channel' data='1' />
					<value target='vrefvol' data='500' />
					<value target='vrefop' data='000' />
					<value target='convspd' data='003' />
					<value target='actime' data='40' />
					<value target='bits' data='10' />
					<value target='bitmul' data='0.004883' />
				</values>
				<events />
				<apis />
				<variables />
				<macros />
			</component>
		</component>
	</components>
	<keymap />
	<panel2d shadows='0' lighting='2' brightness='0' perspective='0' >
		<background rgb='9737364' img='' style='0' />
		<camera xe='0' ye='0' ze='300' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
	</panel2d>
	<panel3d shadows='0' lighting='0' brightness='0' perspective='0' >
		<background rgb='5767167' img='' style='0' />
		<table rgb='7360576' img='' style='0' size='25' />
		<camera xe='0' ye='0' ze='262.959' xt='0' yt='0' zt='0' xquat='0' yquat='0' zquat='0' wquat='1' />
	</panel3d>
	<layout >
		<view type='0' name='Init_max_219' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='75' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Clear_Riga_1' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='75' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Memorizza_address' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='75' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Da_Char_a_Puntatore' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='30' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Scrivi_Display' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='75' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Scrivi_Display_DX' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='70' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Scrivi_Display_SX' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='70' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Main' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='45' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='From_address_to_chars' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='28' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Gest_Timeout' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='75' scrollx='0' scrolly='0' flags='0' />
		<view type='0' name='Clear_display' mode='0' placement='LAAAAAAAAAABAAAA---------------------wAAAAAUAAAAPwUAAGsDAAA' zoom='45' scrollx='0' scrolly='0' flags='0' />
	</layout>
</document>
</root>
