[Device]
ChipName=16F819
Pins=18
Ports=2
ADCPins=5
ADCBits=10
MaxClock=20000000
PrescalerBits=3
ClockDivider=4
TimerOverflow=256
ConfigAddress=0x2007
ConfigCount=1
PWMCount=1
EepromSize=256
HasAltPWM=0
Pwm2IsD4=0
FlowcodeProduct=PIC
UsesGpio=0

[Pins]
Pin1="RA2/AN2"
Pin2="RA3/AN3"
Pin3="RA4/AN4/T0CKI"
Pin4="RA5/MCLR/VPP"
Pin5="Vss"
Pin6="RB0/INT"
Pin7="RB1/SDI"
Pin8="RB2/SDO/CCP1"
Pin9="RB3/PGM/CCP1"
Pin10="RB4/SCK"
Pin11="RB5/SS"
Pin12="RB6/PGC/T1OSI"
Pin13="RB7/PGD/T1OSO/T1CKI"
Pin14="Vdd"
Pin15="RA6/OSC2/CLKO"
Pin16="RA7/OSC1/CLK"
Pin17="RA0/AN0"
Pin18="RA1/AN1"

[Ports]
PortPin1=0x0002
PortPin2=0x0003
PortPin3=0x0004
PortPin4=0x0005
PortPin6=0x0100
PortPin7=0x0101
PortPin8=0x0102
PortPin9=0x0103
PortPin10=0x0104
PortPin11=0x0105
PortPin12=0x0106
PortPin13=0x0107
PortPin15=0x0006
PortPin16=0x0007
PortPin17=0x0000
PortPin18=0x0001

[PortMasks]
PortMask0=0xFF
PortMask1=0xFF

[ADCPins]
ADC0=17
ADC1=18
ADC2=1
ADC3=2
ADC4=3

[Code]
;Substitute macros
;%c Clock Speed
;%o Operand
;%s Prescaler
;%p PortID
;%m MaskBits
;%i Inverse Mask
;%a ADC channel
;%a Config Address
;%v Config Value
;%r Interrupt Flag Register
;%b Interrupt Flag Bit
;%n Interrupt Macro Name
Directives="#include <system.h>\n#pragma CLOCK_FREQ %c\n"
MainStart="void main()\n{\n"
MainEnd="\tmainendloop: goto mainendloop;\n}\n\n"
IntStart="void interrupt(void)\n{\n"
IntEnd="}\n\n"
Initialise="adcon1 = 0x07;\n"
IntInit="option_reg = 0xC0;\n\n"
InputCmdFull="tris%p = tris%p | %m;\n%o = port%p;\n"
InputCmdOneBit="tris%p = tris%p | %m;\n%o = ((port%p & %m) == %m);\n"
InputCmdMask="tris%p = tris%p | %m;\n%o = port%p & %m;\n"
OutputCmdFull="tris%p = 0x00;\nport%p = %o;\n"
OutputCmdOneBit="tris%p = tris%p & %i;\nif (%o)\n\tport%p = (port%p & %i) | %m;\nelse\n\tport%p = port%p & %i;\n"
OutputCmdMask="tris%p = tris%p & %i;\nport%p = (port%p & %i) | (%o & %m);\n"
DelayCmdS="delay_s(%o);\n"
DelayCmdMs="delay_ms(%o);\n"
ADCCapture="//set up ADC conversion\nchar old_tris, cnt;\n\n#define MX_ADC_SAMP_TIME 40\n#define MX_ADC_TRIS_REG  trisa\n\n//find appropriate bit\n#if (%a == 0)\n  #define MX_ADC_TRIS_MSK  0x01\n  adcon1 = 0x05;\n#endif\n#if (%a == 1)\n  #define MX_ADC_TRIS_MSK  0x02\n  adcon1 = 0x05;\n#endif\n#if (%a == 2)\n  #define MX_ADC_TRIS_MSK  0x04\n  adcon1 = 0x03;\n#endif\n#if (%a == 3)\n  #define MX_ADC_TRIS_MSK  0x08\n  adcon1 = 0x02;\n#endif\n#if (%a == 4)\n  #define MX_ADC_TRIS_MSK  0x10\n  adcon1 = 0x03;\n#endif\n\n//sanity check\n#ifndef MX_ADC_TRIS_MSK\n  #pragma error ADC conversion code error - please contact technical support\n#endif\n\n//store old tris value, and set the i/o pin as an input\nold_tris = MX_ADC_TRIS_REG;\nMX_ADC_TRIS_REG = MX_ADC_TRIS_REG | MX_ADC_TRIS_MSK;\n\n//turn ADC on\nadcon0 = 0x81 | (%a << 3);\n\n//wait the acquisition time\ncnt = 0;\nwhile (cnt < MX_ADC_SAMP_TIME) cnt++;\n\n//begin conversion and wait until it has finished\nadcon0 = adcon0 | 0x04;\nwhile (adcon0 & 0x04);\n\n//restore old tris value, and reset adc registers\nMX_ADC_TRIS_REG = old_tris;\nadcon1 = 0x07;\nadcon0 = 0x80;\n#undef MX_ADC_TRIS_REG\n#undef MX_ADC_TRIS_MSK\n#undef MX_ADC_SAMP_TIME\n"
ADCHigh="return adresh;\n"
ADCLow="char adclow;\nadclow = adresl;\nreturn adclow;\n"
ADCFull="short iRetVal;\niRetVal = (adresh << 2);\niRetVal += (adresl >> 6);\nreturn (iRetVal);\n"
InitialPortLetter="a"
ConfigData="#pragma DATA %a, %v\n"
IntHandler="if (%r & (1 << %b))\n{\n\tFCM_%n();\n\tclear_bit(%r, %b);\n}\n"

[Defines]
Define1=#define P16F819
Define2=#define MX_EE
Define3=#define MX_EE_TYPE2
Define4=#define MX_EE_SIZE 256
Define5=#define MX_SPI
Define6=#define MX_SPI_B
Define7=#define MX_SPI_SDI 1
Define8=#define MX_SPI_SDO 2
Define9=#define MX_SPI_SCK 4
Define10=#define MX_I2C
Define11=#define MX_I2C_B
Define12=#define MX_I2C_SDA 1
Define13=#define MX_I2C_SCL 4
Define14=#define MX_PWM
Define15=#define MX_PWM_CNT 1
Define16=#define MX_PWM_TRIS1 trisb
Define17=#define MX_PWM_1 3

[Interrupts]
;first 3 should always be 1=TMR0, 2=RB0INT, 3=PORTB
;any other interrupts need to also have this set: "intcon.PEIE=1;\n"
GeneralInit="intcon.GIE=1;\n"
Count=3
1=TMR0
2=RB0INT
3=PORTB

[TMR0]
;it is vital that this section remains exactly as-is (for all chips?)
Name=(this is retrieved from the resource file)
FlagReg=intcon
FlagBit=TMR0IF
EnReg=intcon
EnBit=TMR0IE
OptCnt=3
TmrOpt=3
Opt1="Clock Source Select"
Opt1Cnt=2
Opt1_1="Transition on T0CKI pin"
Opt1_1Val="option_reg.T0CS=1;\n"
Opt1_2="Internal clock (CLKO)"
Opt1_2Val="option_reg.T0CS=0;\n"
Opt2="Source Edge Select"
Opt2Cnt=2
Opt2_1="high-to-low transition on T0CKI"
Opt2_1Val="option_reg.T0SE=1;\n"
Opt2_2="low-to-high transition on T0CKI"
Opt2_2Val="option_reg.T0SE=0;\n"
Opt3="Prescaler Rate"
Opt3Cnt=9
Opt3_1="1:1"
Opt3_1Val="option_reg = (option_reg & 0xF0) | 0x08;\n"
Opt3_2="1:2"
Opt3_2Val="option_reg = (option_reg & 0xF0) | 0x00;\n"
Opt3_3="1:4"
Opt3_3Val="option_reg = (option_reg & 0xF0) | 0x01;\n"
Opt3_4="1:8"
Opt3_4Val="option_reg = (option_reg & 0xF0) | 0x02;\n"
Opt3_5="1:16"
Opt3_5Val="option_reg = (option_reg & 0xF0) | 0x03;\n"
Opt3_6="1:32"
Opt3_6Val="option_reg = (option_reg & 0xF0) | 0x04;\n"
Opt3_7="1:64"
Opt3_7Val="option_reg = (option_reg & 0xF0) | 0x05;\n"
Opt3_8="1:128"
Opt3_8Val="option_reg = (option_reg & 0xF0) | 0x06;\n"
Opt3_9="1:256"
Opt3_9Val="option_reg = (option_reg & 0xF0) | 0x07;\n"

[RB0INT]
Name=(this is retrieved from the resource file)
FlagReg=intcon
FlagBit=INTF
EnReg=intcon
EnBit=INTE
OptCnt=1
TmrOpt=0
Opt1="Interrupt Edge Select"
Opt1Cnt=2
Opt1_1="rising edge of RB0/INT"
Opt1_1Val="option_reg.INTEDG=1;\n"
Opt1_2="falling edge of RB0/INT"
Opt1_2Val="option_reg.INTEDG=0;\n"

[PORTB]
Name=(this is retrieved from the resource file)
FlagReg=intcon
FlagBit=RBIF
EnReg=intcon
EnBit=RBIE
OptCnt=0
TmrOpt=0