//************************************************************************************ //** //** File name: L:\Documents\Documents\Flowcode Projects\Aquarium Controller Version 2011\Aquarium Controller Version 011-a00.c //** Generated by: Flowcode v4.3.7.63 //** Date: Thursday, September 01, 2011 20:15:48 //** Licence: Professional //** Registered to: 2A1RRG //** //** //** http://www.matrixmultimedia.com //************************************************************************************ #define MX_PIC //Defines voor de microcontroller #define P16F877A #define MX_EE #define MX_EE_TYPE2 #define MX_EE_SIZE 256 #define MX_SPI #define MX_SPI_C #define MX_SPI_SDI 4 #define MX_SPI_SDO 5 #define MX_SPI_SCK 3 #define MX_UART #define MX_UART_C #define MX_UART_TX 6 #define MX_UART_RX 7 #define MX_I2C #define MX_MI2C #define MX_I2C_C #define MX_I2C_SDA 4 #define MX_I2C_SCL 3 #define MX_PWM #define MX_PWM_CNT 2 #define MX_PWM_TRIS1 trisc #define MX_PWM_1 2 #define MX_PWM_TRIS2 trisc #define MX_PWM_2 1 //Functies #define MX_CLK_SPEED 19660800 #ifdef _BOOSTC #include #endif #ifdef HI_TECH_C #include #endif //Configuratiegegevens #ifdef _BOOSTC #pragma DATA 0x2007, 0x3f3a #endif #ifdef HI_TECH_C __CONFIG(0x3f3a); #endif //Interne functies #include "C:\Program Files (x86)\Matrix Multimedia\Flowcode V4\FCD\internals.h" //Macro functie declaraties void FCM_Startup(); void FCM_Preparing(); void FCM_BuildUP_Display(); void FCM_Time_Date_DS1307(); void FCM_Display_Time(); void FCM_Display_Day(); void FCM_Display_Date(); void FCM_I2C_Bus_Init(); //Variable declaraties char FCV_RTC_SEC_BCD; char FCV_ONE_WIRE_SCANBUS; char FCV_RTC_MIN_BCD; char FCV_ONE_WIRE_DEVICECOUNT; char FCV_RTC_DAY; char FCV_RTC_VAR1; char FCV_RTC_YEAR_BCD; char FCV_ONE_WIRE_BUSRESET; char FCV_RTC_VAR2; char FCV_RTC_HR; char FCV_RTC_SEC; char FCV_RTC_MIN; char FCV_SW0; char FCV_RTC_DATE_BCD; char FCV_RTC_MONTH_BCD; char FCV_STARTUP_CHECK; char FCV_RTC_HR_BCD; char FCV_GENERAL_COUNTER; //Defines: /**** Macro Substitutions **** portb = D1 Port trisb = D1 Data Direction portb = D2 Port trisb = D2 Data Direction portb = D3 Port trisb = D3 Data Direction portb = D4 Port trisb = D4 Data Direction portb = RS Port trisb = RS Data Direction portb = E Port trisb = E Data Direction 2 = Data 1_Pin 3 = Data 2 Pin 4 = Data 3 Pin 5 = Data 4 Pin 6 = RS Pin 7 = Enable Pin LCD_1049572 = Unique Component Reference Number 4 = Row Count 20 = Column Count ******************************/ //component connections #define LCD_1049572_PORT0 portb #define LCD_1049572_TRIS0 trisb #define LCD_1049572_PORT1 portb #define LCD_1049572_TRIS1 trisb #define LCD_1049572_PORT2 portb #define LCD_1049572_TRIS2 trisb #define LCD_1049572_PORT3 portb #define LCD_1049572_TRIS3 trisb #define LCD_1049572_PORT4 portb #define LCD_1049572_TRIS4 trisb #define LCD_1049572_PORT5 portb #define LCD_1049572_TRIS5 trisb #define LCD_1049572_BIT0 2 #define LCD_1049572_BIT1 3 #define LCD_1049572_BIT2 4 #define LCD_1049572_BIT3 5 #define LCD_1049572_RS 6 #define LCD_1049572_E 7 #define LCD_1049572_ROWCNT 4 #define LCD_1049572_COLCNT 20 #ifdef _BOOSTC #define LCD_1049572_DELAY delay_10us(10) #endif #ifdef _C2C_ #define LCD_1049572_DELAY delay_us(100) #endif #ifdef HI_TECH_C #define LCD_1049572_DELAY __delay_us(120) #endif #ifndef LCD_1049572_DELAY #define LCD_1049572_DELAY delay_us(100) #endif //LCDDisplay(0): //Macro functie declaraties void FCD_LCDDisplay0_RawSend(char in, char mask); void FCD_LCDDisplay0_Start(); void FCD_LCDDisplay0_Clear(); void FCD_LCDDisplay0_PrintASCII(char Character); void FCD_LCDDisplay0_Command(char in); void FCD_LCDDisplay0_Cursor(char x, char y); void FCD_LCDDisplay0_PrintNumber(short Number); void FCD_LCDDisplay0_PrintString(char* String, char MSZ_String); void FCD_LCDDisplay0_ScrollDisplay(char Direction, char Num_Positions); void FCD_LCDDisplay0_ClearLine(char Line); void FCD_LCDDisplay0_RAM_Write(char nIdx, char d0, char d1, char d2, char d3, char d4, char d5, char d6, char d7); //Defines: /**** Macro Substitutions **** 0 = CRC Check Enable (0-Off / 1-On) portc = One Wire Port Register trisc = One Wire Data Direction Register 6 = One Wire Pin %e = Clock Cycles For A 1us Delay ******************************/ #define CRC_CHECKING 0 #define OO_PORT portc #define OO_TRIS trisc #define OO_PIN 6 //Global Variables char oo_scratchpad[9]; // Scratchpad contents // 0 Temperature LSB // 1 Temperature MSB // 2 Hi alarm temperature // 3 Lo alarm temperature // 4 Reserved, 0xFF // 5 Reserved, 0xFF // 6 Remainder register // 7 Nr of counts per degree // 8 CRC of pad contents // Commands for the OO // 1. ROM function commands #define OO_READROM 0x33 #define OO_MATCHROM 0x55 #define OO_SKIPROM 0xCC #define OO_SEARCHROM 0xF0 #define OO_ALARMSEARCH 0xEC // 2. Memory Command Functions #define OO_WRITEPAD 0x4E #define OO_READPAD 0xBE #define OO_COPYPAD 0x48 #define OO_CONVERTT 0x44 #define OO_RECALLE2 0xB8 #define OO_READSUPPLY 0xB4 //I/O for the OO #define Float_OO {set_bit(OO_TRIS, OO_PIN);} #define Clear_OO {clear_bit(OO_TRIS, OO_PIN); clear_bit(OO_PORT, OO_PIN);} char FCD_One_Wire0_oo_get_next_id(); void FCD_One_Wire0_tx_bit(char out); char FCD_One_Wire0_rx_bit(); // CRC working variable char crc = 0; //CRC for the OO #if CRC_CHECKING == 1 // CRC lookup table #ifdef _BOOSTC rom char* crc_rom = {0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65, 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220, 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98, 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255, 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7, 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154, 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36, 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185, 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205, 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80, 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238, 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115, 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139, 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22, 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168, 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53}; #endif #ifdef HI_TECH_C const char crc_rom[] = {0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65, 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220, 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98, 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255, 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7, 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154, 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36, 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185, 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205, 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80, 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238, 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115, 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139, 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22, 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168, 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53}; #endif #endif // Internal variables char id[8]; signed char conflict; char new_conflict; //Device ID Variables char num_devices = 0; char DevID[64] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; //One_Wire(0): //Macro functie declaraties void FCD_One_Wire0_oo_crc_shuffle_byte(char input); void FCD_One_Wire0_oo_crc_init(); char FCD_One_Wire0_rx_bit(); void FCD_One_Wire0_tx_bit(char out); char FCD_One_Wire0_oo_get_next_id(); char FCD_One_Wire0_oo_busreset(); char FCD_One_Wire0_oo_get_pad_byte(char index); void FCD_One_Wire0_oo_tx_byte(char data); char FCD_One_Wire0_oo_rx_byte(); char FCD_One_Wire0_oo_scanbus(); char FCD_One_Wire0_oo_get_devicecount(); char FCD_One_Wire0_oo_read_device(char count); char FCD_One_Wire0_oo_get_IDByte(char device, char octet); char FCD_One_Wire0_DS1820_start_conversion(); char FCD_One_Wire0_DS1820_read_scratchpad(); short FCD_One_Wire0_DS1820_get_temp(); //Defines: /**** Macro Substitutions **** 0 = SM BUS Enable 0 = Slew Rate Enable 25 = Baud Rate 1 = Hardware or Bitbanged I2C portd = Bitbanged Port Register trisd = Bitbanged Data Direction Register 3 = Bitbanged Clock Pin 4 = Bitbanged Data Pin MI2C_5834788 = Unique component ID ******************************/ //common defines #define MI2C_5834788_MX_MI2C_SMBUS 0 #define MI2C_5834788_MX_MI2C_SLEW 0 #define MI2C_5834788_MX_MI2C_BAUD 25 #define MI2C_5834788_MX_HARDWARE 1 #define MI2C_5834788_MX_PORT portd #define MI2C_5834788_MX_TRIS trisd #define MI2C_5834788_MX_SCL 3 #define MI2C_5834788_MX_SDA 4 #define MI2C_5834788_MX_I2C_DELAY delay_us(10); #define MI2C_5834788_SET_SCL set_bit(MI2C_5834788_MX_TRIS,MI2C_5834788_MX_SCL); #define MI2C_5834788_CLEAR_SCL {clear_bit(MI2C_5834788_MX_TRIS,MI2C_5834788_MX_SCL); clear_bit(MI2C_5834788_MX_PORT,MI2C_5834788_MX_SCL);} #define MI2C_5834788_SET_SDA set_bit(MI2C_5834788_MX_TRIS,MI2C_5834788_MX_SDA); #define MI2C_5834788_CLEAR_SDA {clear_bit(MI2C_5834788_MX_TRIS,MI2C_5834788_MX_SDA); clear_bit(MI2C_5834788_MX_PORT,MI2C_5834788_MX_SDA);} //I2C_Master(0): //Macro functie declaraties void FCD_I2C_Master0_MI2C_Init(); void FCD_I2C_Master0_MI2C_Start(); void FCD_I2C_Master0_MI2C_Restart(); void FCD_I2C_Master0_MI2C_Stop(); char FCD_I2C_Master0_MI2C_Transmit_Byte(char Data); char FCD_I2C_Master0_MI2C_Receive_Byte(char Last); void FCD_I2C_Master0_MI2C_Send_Byte_Transaction(char Device_ID, char AddrH, char AddrL, char Data); char FCD_I2C_Master0_MI2C_Receive_Byte_Transaction(char Device_ID, char AddrH, char AddrL); //LCDDisplay(0): //Macro implementaties void FCD_LCDDisplay0_RawSend(char in, char mask) { unsigned char pt; clear_bit(LCD_1049572_PORT0, LCD_1049572_BIT0); clear_bit(LCD_1049572_PORT1, LCD_1049572_BIT1); clear_bit(LCD_1049572_PORT2, LCD_1049572_BIT2); clear_bit(LCD_1049572_PORT3, LCD_1049572_BIT3); clear_bit(LCD_1049572_PORT4, LCD_1049572_RS); clear_bit(LCD_1049572_PORT5, LCD_1049572_E); pt = ((in >> 4) & 0x0f); if (pt & 0x01) set_bit(LCD_1049572_PORT0, LCD_1049572_BIT0); if (pt & 0x02) set_bit(LCD_1049572_PORT1, LCD_1049572_BIT1); if (pt & 0x04) set_bit(LCD_1049572_PORT2, LCD_1049572_BIT2); if (pt & 0x08) set_bit(LCD_1049572_PORT3, LCD_1049572_BIT3); if (mask) set_bit(LCD_1049572_PORT4, LCD_1049572_RS); LCD_1049572_DELAY; set_bit (LCD_1049572_PORT5, LCD_1049572_E); LCD_1049572_DELAY; clear_bit (LCD_1049572_PORT5, LCD_1049572_E); pt = (in & 0x0f); LCD_1049572_DELAY; clear_bit(LCD_1049572_PORT0, LCD_1049572_BIT0); clear_bit(LCD_1049572_PORT1, LCD_1049572_BIT1); clear_bit(LCD_1049572_PORT2, LCD_1049572_BIT2); clear_bit(LCD_1049572_PORT3, LCD_1049572_BIT3); clear_bit(LCD_1049572_PORT4, LCD_1049572_RS); clear_bit(LCD_1049572_PORT5, LCD_1049572_E); if (pt & 0x01) set_bit(LCD_1049572_PORT0, LCD_1049572_BIT0); if (pt & 0x02) set_bit(LCD_1049572_PORT1, LCD_1049572_BIT1); if (pt & 0x04) set_bit(LCD_1049572_PORT2, LCD_1049572_BIT2); if (pt & 0x08) set_bit(LCD_1049572_PORT3, LCD_1049572_BIT3); if (mask) set_bit(LCD_1049572_PORT4, LCD_1049572_RS); LCD_1049572_DELAY; set_bit (LCD_1049572_PORT5, LCD_1049572_E); LCD_1049572_DELAY; clear_bit (LCD_1049572_PORT5, LCD_1049572_E); LCD_1049572_DELAY; } void FCD_LCDDisplay0_Start() { clear_bit(LCD_1049572_TRIS0, LCD_1049572_BIT0); clear_bit(LCD_1049572_TRIS1, LCD_1049572_BIT1); clear_bit(LCD_1049572_TRIS2, LCD_1049572_BIT2); clear_bit(LCD_1049572_TRIS3, LCD_1049572_BIT3); clear_bit(LCD_1049572_TRIS4, LCD_1049572_RS); clear_bit(LCD_1049572_TRIS5, LCD_1049572_E); Wdt_Delay_Ms(12); FCD_LCDDisplay0_RawSend(0x33, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x33, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x32, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x2c, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x06, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x0c, 0); Wdt_Delay_Ms(2); //clear the display FCD_LCDDisplay0_RawSend(0x01, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x02, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_Clear() { FCD_LCDDisplay0_RawSend(0x01, 0); Wdt_Delay_Ms(2); FCD_LCDDisplay0_RawSend(0x02, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_PrintASCII(char Character) { FCD_LCDDisplay0_RawSend(Character, 0x10); } void FCD_LCDDisplay0_Command(char in) { FCD_LCDDisplay0_RawSend(in, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_Cursor(char x, char y) { #if (LCD_1049572_ROWCNT == 1) y=0x80; #endif #if (LCD_1049572_ROWCNT == 2) if (y==0) y=0x80; else y=0xc0; #endif #if (LCD_1049572_ROWCNT == 4) if (y==0) y=0x80; else if (y==1) y=0xc0; #if (LCD_1049572_COLCNT == 16) else if (y==2) y=0x90; else y=0xd0; #endif #if (LCD_1049572_COLCNT == 20) else if (y==2) y=0x94; else y=0xd4; #endif #endif FCD_LCDDisplay0_RawSend(y+x, 0); Wdt_Delay_Ms(2); } void FCD_LCDDisplay0_PrintNumber(short Number) { short tmp_int; char tmp_byte; if (Number < 0) { FCD_LCDDisplay0_RawSend('-', 0x10); Number = 0 - Number; } tmp_int = Number; if (Number >= 10000) { tmp_byte = tmp_int / 10000; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 10000; tmp_byte--; } } if (Number >= 1000) { tmp_byte = tmp_int / 1000; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 1000; tmp_byte--; } } if (Number >= 100) { tmp_byte = tmp_int / 100; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 100; tmp_byte--; } } if (Number >= 10) { tmp_byte = tmp_int / 10; FCD_LCDDisplay0_RawSend('0' + tmp_byte, 0x10); while (tmp_byte > 0) { tmp_int = tmp_int - 10; tmp_byte--; } } FCD_LCDDisplay0_RawSend('0' + tmp_int, 0x10); } void FCD_LCDDisplay0_PrintString(char* String, char MSZ_String) { char idx = 0; for (idx=0; idx error } // Issue the search ROM command FCD_One_Wire0_oo_tx_byte(OO_SEARCHROM); // Start the search for the sensor for (byte_index = 0; byte_index < 8; byte_index++) { char data_in_byte = 0; for (bit_index = 0; bit_index < 8; bit_index++) { // Read 2 consecutive bits from the One Wire bus val0 = FCD_One_Wire0_rx_bit(); //Test Input val1 = FCD_One_Wire0_rx_bit(); //Test Input // Evaluate the result if ((val0 == 0) && (val1 == 0)) { //current_conflict = counter; // if conflict occurs earlier than the previous conflict, then use the previous value if (counter < conflict) { // use previous value bit_test = id[byte_index] >> bit_index; //added JCMB 10/01/09 if (bit_test & 0x01) { val0 = 1; } else { val0 = 0; lz_selected = counter; //added JCMB 10/01/09 go_on = 1; //added JCMB 10/01/09 } } else if (counter == conflict) { // use 1 val0 = 1; } else { // use zero on new conflicts val0 = 0; conflict = counter; new_conflict = 1; } } else if (val0 && val1) // 1 et 1 impossible { return 2; } // Store the bit in the ID array data_in_byte = data_in_byte >> 1; if (val0) { data_in_byte |= 0x80; } FCD_One_Wire0_tx_bit(val0); counter++; } id[byte_index] = data_in_byte; } //added JCMB 10/01/09 if ((new_conflict == 0) && go_on) { new_conflict = 1; conflict = lz_selected ; } // Verify ID CRC #if CRC_CHECKING == 1 FCD_One_Wire0_oo_crc_init(); #endif for (byte_index = 0; byte_index < 8; byte_index++) { #if CRC_CHECKING == 1 FCD_One_Wire0_oo_crc_shuffle_byte(id[byte_index]); #endif } // Bail on CRC errors #if CRC_CHECKING == 1 if (crc) return crc; #endif return 0; } char FCD_One_Wire0_oo_busreset() { Float_OO; // Release bus Clear_OO; // Send the reset pulse delay_us(200); // Wait for 600 µs, this is the reset pulse delay_us(200); delay_us(200); Float_OO; // Release bus delay_us(60); // Wait 60 us (release) let device drive the bus if (test_bit(OO_PORT, OO_PIN) == 1) // Now sample, if there is a sensor on the bus, the line should be low return 1; // <<-error delay_us(140); // Wait another 540 us to complete the reset sequence delay_us(200); delay_us(200); return 0; } char FCD_One_Wire0_oo_get_pad_byte(char index) { return oo_scratchpad[index]; } void FCD_One_Wire0_oo_tx_byte(char data) { char counter = 0; while (counter < 8) { FCD_One_Wire0_tx_bit(data); data = data >> 1; //Rotate to next bit of data counter++; //Increment Counter } } char FCD_One_Wire0_oo_rx_byte() { char counter = 0; char data = 0; char oo_bit = 0; while (counter < 8) { oo_bit = FCD_One_Wire0_rx_bit(); data = data >> 1; //Shift incoming data to next bit if (oo_bit > 0) { data = data | 0x80; //Append incoming bit to data byte } counter++; //Increment Counter } #ifdef OO_CRC_CHECKING FCD_One_Wire0_oo_crc_shuffle_byte(data); //Check CRC #endif return data; } char FCD_One_Wire0_oo_scanbus() { char retval = 0; char device_count = 0; char loper; conflict = -1; new_conflict = 1; // Reset the bus, wake up devices. retval = FCD_One_Wire0_oo_busreset(); if (retval == 1) { return 255; // -> error } // new_conflict gets updated in the FCD_One_Wire0_oo_get_next_id() function. while (new_conflict) { retval = FCD_One_Wire0_oo_get_next_id(); // Bail in case of errors if (retval) return retval; // Add the device id to EEPROM for (loper=0; loper < 8; loper++) { DevID[loper+(device_count<<3)] = id[loper]; } device_count++; } // Write number of devices to the EEPROM num_devices = device_count; return 0; } char FCD_One_Wire0_oo_get_devicecount() { return num_devices; } char FCD_One_Wire0_oo_read_device(char count) { char loper = 0; char counter = 0; char temp; short value; FCD_One_Wire0_oo_busreset(); FCD_One_Wire0_oo_tx_byte(OO_MATCHROM); for (loper=0; loper < 8; loper++) { id[loper] = DevID[loper+(count<<3)]; FCD_One_Wire0_oo_tx_byte(id[loper]); } FCD_One_Wire0_oo_tx_byte(OO_READPAD); #if CRC_CHECKING == 1 FCD_One_Wire0_oo_crc_init(); //Reset the CRC register, CRC is updated in the FCD_One_Wire0_oo_rx_byte() function. #endif while (counter < 9) { temp = FCD_One_Wire0_oo_rx_byte(); oo_scratchpad[counter] = temp; counter++; } #if CRC_CHECKING == 1 return crc; //Verify the CRC #endif return 0; } char FCD_One_Wire0_oo_get_IDByte(char device, char octet) { char retval = 255; if ((device >= num_devices) | (octet > 7)) { return retval ; //error } retval = DevID[octet+(device<<3)]; return retval ; } char FCD_One_Wire0_DS1820_start_conversion() { char in = 0; char counter = 0; FCD_One_Wire0_oo_busreset(); FCD_One_Wire0_oo_tx_byte(OO_SKIPROM); // Command all temp sensors on the bus to start a conversion FCD_One_Wire0_oo_tx_byte(OO_CONVERTT); // Convert temperature while (in == 0) { in = FCD_One_Wire0_oo_rx_byte(); delay_ms(4); counter++; if (counter == 0xFF) // Security: if the conversion is not completed return 1; // after > 1 sec -> break. } return 0; } char FCD_One_Wire0_DS1820_read_scratchpad() { char temp; char counter = 0; if ( FCD_One_Wire0_oo_busreset() ) return (1); FCD_One_Wire0_oo_tx_byte(OO_SKIPROM); //Command all temp sensors on the bus to start a conversion FCD_One_Wire0_oo_tx_byte(OO_READPAD); //Convert temperature #if CRC_CHECKING == 1 FCD_One_Wire0_oo_crc_init(); //Reset the CRC register, CRC is updated in the FCD_One_Wire0_oo_rx_byte() function. #endif while (counter < 9) { temp = FCD_One_Wire0_oo_rx_byte(); oo_scratchpad[counter] = temp; counter++; } #if CRC_CHECKING == 1 return crc; //Verify the CRC #endif return 0; } short FCD_One_Wire0_DS1820_get_temp() { short retval; retval = oo_scratchpad[1]; retval = retval << 8; retval = retval | oo_scratchpad[0]; return retval; } //I2C_Master(0): //Macro implementaties void FCD_I2C_Master0_MI2C_Init() { #if MI2C_5834788_MX_HARDWARE == 1 //Use Master I2C Hardware #ifndef MX_MI2C #warning "This chip does not have Master I2C capability" #else #ifdef MX_I2C_A #define MI2C_5834788_MX_I2C_TRIS trisa #endif #ifdef MX_I2C_B #define MI2C_5834788_MX_I2C_TRIS trisb #endif #ifdef MX_I2C_C #define MI2C_5834788_MX_I2C_TRIS trisc #endif #ifdef MX_I2C_D #define MI2C_5834788_MX_I2C_TRIS trisd #endif #if MI2C_5834788_MX_MI2C_SLEW == 1 cr_bit (sspstat,SMP); //Slew Rate Control Enabled #else st_bit (sspstat,SMP); //Slew Rate Control Disabled #endif #if MI2C_5834788_MX_MI2C_SMBUS == 1 st_bit (sspstat,CKE); //Enable SMBus specific inputs #else cr_bit (sspstat,CKE); //Disable SMBus specific inputs #endif #ifdef _BOOSTC #ifdef SSPCON sspcon = 0x28; //Setup I2C into Master Mode #endif #ifdef SSPCON1 sspcon1 = 0x28; //Setup I2C into Master Mode #endif #endif #ifdef HI_TECH_C #ifdef sspcon sspcon = 0x28; //Setup I2C into Master Mode #endif #ifdef sspcon1 sspcon1 = 0x28; //Setup I2C into Master Mode #endif #endif sspadd = MI2C_5834788_MX_MI2C_BAUD; //Set the Baud Rate sspcon2 = 0x00; //Clear the control bits st_bit(intcon, GIE); set_bit(MI2C_5834788_MX_TRIS, MI2C_5834788_MX_SCL); //Configure SCL as Input set_bit(MI2C_5834788_MX_TRIS, MI2C_5834788_MX_SDA); //Configure SDA as Input #endif #else //Use Software clear_bit(MI2C_5834788_MX_PORT,MI2C_5834788_MX_SCL); //Set Outputs to 0 clear_bit(MI2C_5834788_MX_PORT,MI2C_5834788_MX_SDA); MI2C_5834788_SET_SDA; //Configure SDA as Input MI2C_5834788_SET_SCL; //Configure SCL as Input #endif } void FCD_I2C_Master0_MI2C_Start() { #if MI2C_5834788_MX_HARDWARE == 1 //Use Master I2C Hardware #ifndef MX_MI2C #warning "This chip does not have Master I2C capability" #else cr_bit(pir1,SSPIF); //Clear SSP interrupt flag st_bit(sspcon2,SEN); //Initiate start condition while(ts_bit(sspcon2,SEN)); //Wait for start bit to be generated #endif #else //Use Software I2C MI2C_5834788_SET_SCL; //Make Sure SCL is Set MI2C_5834788_SET_SDA; //Make Sure SDA is Set MI2C_5834788_MX_I2C_DELAY; //Small Delay MI2C_5834788_CLEAR_SDA; //Clear SDA MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_CLEAR_SCL; //Clear SCL MI2C_5834788_MX_I2C_DELAY; #endif } void FCD_I2C_Master0_MI2C_Restart() { #if MI2C_5834788_MX_HARDWARE == 1 //Use Master I2C Hardware #ifndef MX_MI2C #warning "This chip does not have Master I2C capability" #else cr_bit(pir1,SSPIF); //Clear SSP interrupt flag st_bit(sspcon2,RSEN); //Initiate restart condition while(ts_bit(sspcon2,RSEN)); //Wait for restart bit to be generated #endif #else //Use Software I2C MI2C_5834788_SET_SDA; //Set SDA High MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_SET_SCL; //Set SCL High MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_CLEAR_SDA; //Set SDA Low MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_CLEAR_SCL; //Set SCL Low MI2C_5834788_MX_I2C_DELAY; #endif } void FCD_I2C_Master0_MI2C_Stop() { #if MI2C_5834788_MX_HARDWARE == 1 //Use Master I2C Hardware #ifndef MX_MI2C #warning "This chip does not have Master I2C capability" #else cr_bit(pir1,SSPIF); //Clear SSP interrupt flag st_bit(sspcon2,PEN); //Initiate stop condition while(ts_bit(sspcon2,PEN)); //Wait for stop bit to be generated delay_ms(10); //Wait before reusing the I2C BUS #endif #else //Use Software I2C MI2C_5834788_CLEAR_SCL; //Set SCL Low MI2C_5834788_CLEAR_SDA; //Set SDA Low MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_SET_SCL; //Set SCL High MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_SET_SDA; //Set SDA High delay_ms(10); //Wait before reusing the I2C BUS #endif } char FCD_I2C_Master0_MI2C_Transmit_Byte(char Data) { #if MI2C_5834788_MX_HARDWARE == 1 //Use Master I2C Hardware #ifndef MX_MI2C #warning "This chip does not have Master I2C capability" #else cr_bit(pir1,SSPIF); //Clear SSP interrupt flag sspbuf=Data; //Send byte while(ts_bit(pir1,SSPIF) == 0); //Wait for control bit to be sent if(ts_bit(sspcon2,ACKSTAT)) //Check Acknowledgement return (1); //No Acknowledgement else return (0); //Acknowledgement received #endif #else //Use Software I2C char bit_mask; char local_ack = 0; for(bit_mask=0x80;bit_mask;bit_mask=bit_mask>>1) { if(Data & bit_mask) { MI2C_5834788_SET_SDA; //Set SDA High } else { MI2C_5834788_CLEAR_SDA; //Set SDA Low } MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_SET_SCL; //Set SCL High MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_CLEAR_SCL; //Set SCL Low MI2C_5834788_MX_I2C_DELAY; } MI2C_5834788_SET_SDA; //Set SDA High MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_SET_SCL; //Set SCL High MI2C_5834788_MX_I2C_DELAY; if (test_bit(MI2C_5834788_MX_PORT,MI2C_5834788_MX_SDA)) //Get the Status Bit local_ack = 1; MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_CLEAR_SCL; //Set SCL Low MI2C_5834788_MX_I2C_DELAY; return (local_ack); //0 = Ack received : 1 = Ack not received #endif } char FCD_I2C_Master0_MI2C_Receive_Byte(char Last) { #if MI2C_5834788_MX_HARDWARE == 1 //Use Master I2C Hardware #ifndef MX_MI2C #warning "This chip does not have Master I2C capability" #else cr_bit(pir1,SSPIF); //Clear SSP interrupt flag st_bit(sspcon2,RCEN); //Initiate Read while(ts_bit(pir1,SSPIF) == 0); //Wait for data read if (Last) st_bit(sspcon2,ACKDT); //Send Nack else cr_bit(sspcon2,ACKDT); //Send Ack st_bit(sspcon2,ACKEN); //Initiate Nack while(ts_bit(sspcon2,ACKEN)); //Wait for data read return(sspbuf); //Store incoming data #endif #else //Use Software I2C char bit_mask; char Data = 0; char local_ack; MI2C_5834788_SET_SDA; //Set SDA High MI2C_5834788_MX_I2C_DELAY; for(bit_mask=0x80;bit_mask;bit_mask=bit_mask>>1) { MI2C_5834788_SET_SCL; //Set SCL High MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_SET_SDA; if(test_bit(MI2C_5834788_MX_PORT,MI2C_5834788_MX_SDA)) //Read Incoming Bit Data = Data | bit_mask; //Add data to variable MI2C_5834788_CLEAR_SCL; //Set SCL Low MI2C_5834788_MX_I2C_DELAY; } if (Last) //Acknowledge? { MI2C_5834788_SET_SDA; //Send Nack } else { MI2C_5834788_CLEAR_SDA; //Send Ack } MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_SET_SCL; //Set SCL High MI2C_5834788_MX_I2C_DELAY; MI2C_5834788_CLEAR_SCL; //Set SCL Low MI2C_5834788_MX_I2C_DELAY; return (Data); #endif } void FCD_I2C_Master0_MI2C_Send_Byte_Transaction(char Device_ID, char AddrH, char AddrL, char Data) { Device_ID = Device_ID << 1; //Shift Device ID to enable write mode FCD_I2C_Master0_MI2C_Start(); //Start transaction FCD_I2C_Master0_MI2C_Transmit_Byte(Device_ID); //Transmit Device Address FCD_I2C_Master0_MI2C_Transmit_Byte(AddrH); //Transmit Internal Address FCD_I2C_Master0_MI2C_Transmit_Byte(AddrL); FCD_I2C_Master0_MI2C_Transmit_Byte(Data); //Send Data byte FCD_I2C_Master0_MI2C_Stop(); //Stop Transaction } char FCD_I2C_Master0_MI2C_Receive_Byte_Transaction(char Device_ID, char AddrH, char AddrL) { char RetVal = 0; Device_ID = Device_ID << 1; //Shift Device ID to enable write mode FCD_I2C_Master0_MI2C_Start(); //Start transaction FCD_I2C_Master0_MI2C_Transmit_Byte(Device_ID); //Transmit Device Address FCD_I2C_Master0_MI2C_Transmit_Byte(AddrH); //Transmit Internal Address FCD_I2C_Master0_MI2C_Transmit_Byte(AddrL); FCD_I2C_Master0_MI2C_Restart(); //Restart transaction Device_ID = Device_ID | 0x01; //Change Device ID to read mode FCD_I2C_Master0_MI2C_Transmit_Byte(Device_ID); //Transmit Device Address RetVal = FCD_I2C_Master0_MI2C_Receive_Byte(1); //Read data at address FCD_I2C_Master0_MI2C_Stop(); //Stop Transaction return RetVal; //Return data } //Macro implementaties void FCM_Startup() { //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Start FCD_LCDDisplay0_Start(); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Clear FCD_LCDDisplay0_Clear(); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Starting Device") FCD_LCDDisplay0_PrintString("Starting Device",15); //Component Macro Aanroepen //Component Macro Aanroepen: One_Wire_BusReset=One_Wire(0)::oo_busreset FCV_ONE_WIRE_BUSRESET = FCD_One_Wire0_oo_busreset(); //Component Macro Aanroepen //Component Macro Aanroepen: One_Wire_ScanBus=One_Wire(0)::oo_scanbus FCV_ONE_WIRE_SCANBUS = FCD_One_Wire0_oo_scanbus(); //Component Macro Aanroepen //Component Macro Aanroepen: One_Wire_DeviceCount=One_Wire(0)::oo_get_devicecount FCV_ONE_WIRE_DEVICECOUNT = FCD_One_Wire0_oo_get_devicecount(); //Delay //Delay: 1 s delay_s(1); //Decision //Decision: One_Wire_BusReset = 0? if (FCV_ONE_WIRE_BUSRESET == 0) { //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Devices are present") FCD_LCDDisplay0_PrintString("Devices are present",19); } else { //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("No Device Present") FCD_LCDDisplay0_PrintString("No Device Present",17); } //Delay //Delay: 3 s delay_s(3); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Wis lijn(2) FCD_LCDDisplay0_ClearLine(2); //Decision //Decision: One_Wire_ScanBus == 0? if (FCV_ONE_WIRE_SCANBUS == 0) { //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Error on Bus") FCD_LCDDisplay0_PrintString("Error on Bus",12); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(13, 2) FCD_LCDDisplay0_Cursor(13, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(One_Wire_ScanBus) FCD_LCDDisplay0_PrintNumber(FCV_ONE_WIRE_SCANBUS); } else { //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Bus OK") FCD_LCDDisplay0_PrintString("Bus OK",6); } //Delay //Delay: 3 s delay_s(3); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Wis lijn(2) FCD_LCDDisplay0_ClearLine(2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Working Devices:") FCD_LCDDisplay0_PrintString("Working Devices:",16); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(16, 2) FCD_LCDDisplay0_Cursor(16, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(One_Wire_DeviceCount) FCD_LCDDisplay0_PrintNumber(FCV_ONE_WIRE_DEVICECOUNT); //Delay //Delay: 3 s delay_s(3); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Wis lijn(2) FCD_LCDDisplay0_ClearLine(2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Preparing i2c Bus") FCD_LCDDisplay0_PrintString("Preparing i2c Bus",17); //Delay //Delay: 3 s delay_s(3); } void FCM_Preparing() { //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Clear FCD_LCDDisplay0_Clear(); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Preparing Device") FCD_LCDDisplay0_PrintString("Preparing Device",16); //Delay //Delay: 600 ms delay_ms(255); delay_ms(255); delay_ms(90); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Building Menu") FCD_LCDDisplay0_PrintString("Building Menu",13); //Delay //Delay: 3 s delay_s(3); } void FCM_BuildUP_Display() { //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Clear FCD_LCDDisplay0_Clear(); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Water Temp:") FCD_LCDDisplay0_PrintString("Water Temp:",11); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 1) FCD_LCDDisplay0_Cursor(0, 1); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Light Level:") FCD_LCDDisplay0_PrintString("Light Level:",12); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 2) FCD_LCDDisplay0_Cursor(0, 2); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("pH Level:") FCD_LCDDisplay0_PrintString("pH Level:",9); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 3) FCD_LCDDisplay0_Cursor(0, 3); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::PrintString("Retrieving Info...") FCD_LCDDisplay0_PrintString("Retrieving Info...",18); } void FCM_Time_Date_DS1307() { // //Component Macro Aanroepen: I2C_Master(0)::MI2C_Start FCD_I2C_Master0_MI2C_Start(); //ecrire //Component Macro Aanroepen: I2C_Master(0)::MI2C_Transmit_Byte(0xD0) FCD_I2C_Master0_MI2C_Transmit_Byte(0xD0); //reg0 //Component Macro Aanroepen: I2C_Master(0)::MI2C_Transmit_Byte(0) FCD_I2C_Master0_MI2C_Transmit_Byte(0); //restart //Component Macro Aanroepen: I2C_Master(0)::MI2C_Restart FCD_I2C_Master0_MI2C_Restart(); //lecture //Component Macro Aanroepen: I2C_Master(0)::MI2C_Transmit_Byte(0xD1) FCD_I2C_Master0_MI2C_Transmit_Byte(0xD1); //second //Component Macro Aanroepen: RTC_SEC_BCD=I2C_Master(0)::MI2C_Receive_Byte(0) FCV_RTC_SEC_BCD = FCD_I2C_Master0_MI2C_Receive_Byte(0); //minut //Component Macro Aanroepen: RTC_MIN_BCD=I2C_Master(0)::MI2C_Receive_Byte(0) FCV_RTC_MIN_BCD = FCD_I2C_Master0_MI2C_Receive_Byte(0); //hour //Component Macro Aanroepen: RTC_HR_BCD=I2C_Master(0)::MI2C_Receive_Byte(1) FCV_RTC_HR_BCD = FCD_I2C_Master0_MI2C_Receive_Byte(1); // //Component Macro Aanroepen: I2C(0)::MI2C_Stop FCD_I2C0_MI2C_Stop(); } void FCM_Display_Time() { // //Calculation: // RTC_var1 = RTC_SEC_BCD AND 0x0F // RTC_var2 = ( RTC_SEC_BCD >> 4 ) AND 0x07 // RTC_SEC = RTC_var1 + ( RTC_var2 * 10 ) // RTC_var1 = RTC_MIN_BCD AND 0x0F // RTC_var2 = ( RTC_MIN_BCD >> 4 ) AND 0x07 // RTC_MIN = RTC_var1 + ( RTC_var2 * 10 ) // RTC_var1 = RTC_HR_BCD AND 0x0F // RTC_var2 = ( RTC_HR_BCD >> 4 ) AND 0x03 // RTC_HR = RTC_var1 + ( RTC_var2 * 10 ) FCV_RTC_VAR1 = FCV_RTC_SEC_BCD & 0x0F; FCV_RTC_VAR2 = ( FCV_RTC_SEC_BCD >> 4 ) & 0x07; FCV_RTC_SEC = FCV_RTC_VAR1 + ( FCV_RTC_VAR2 * 10 ); FCV_RTC_VAR1 = FCV_RTC_MIN_BCD & 0x0F; FCV_RTC_VAR2 = ( FCV_RTC_MIN_BCD >> 4 ) & 0x07; FCV_RTC_MIN = FCV_RTC_VAR1 + ( FCV_RTC_VAR2 * 10 ); FCV_RTC_VAR1 = FCV_RTC_HR_BCD & 0x0F; FCV_RTC_VAR2 = ( FCV_RTC_HR_BCD >> 4 ) & 0x03; FCV_RTC_HR = FCV_RTC_VAR1 + ( FCV_RTC_VAR2 * 10 ); //Component Macro Aanroepen //Component Macro Aanroepen: LCDDisplay(0)::Cursor(0, 3) FCD_LCDDisplay0_Cursor(0, 3); //N < 10 //Decision: RTC_HR < 10? if (FCV_RTC_HR < 10) { //add 0 //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(0) FCD_LCDDisplay0_PrintNumber(0); } //hour //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(RTC_HR) FCD_LCDDisplay0_PrintNumber(FCV_RTC_HR); // //Component Macro Aanroepen: LCDDisplay(0)::PrintString(":") FCD_LCDDisplay0_PrintString(":",1); //N < 10 //Decision: RTC_MIN < 10? if (FCV_RTC_MIN < 10) { //add 0 //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(0) FCD_LCDDisplay0_PrintNumber(0); } //min //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(RTC_MIN) FCD_LCDDisplay0_PrintNumber(FCV_RTC_MIN); // //Component Macro Aanroepen: LCDDisplay(0)::PrintString(":") FCD_LCDDisplay0_PrintString(":",1); //N < 10 //Decision: RTC_SEC < 10? if (FCV_RTC_SEC < 10) { //add 0 //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(0) FCD_LCDDisplay0_PrintNumber(0); } //sec //Component Macro Aanroepen: LCDDisplay(0)::PrintNumber(RTC_SEC) FCD_LCDDisplay0_PrintNumber(FCV_RTC_SEC); } void FCM_Display_Day() { } void FCM_Display_Date() { } void FCM_I2C_Bus_Init() { //Component Macro Aanroepen //Component Macro Aanroepen: I2C_Master(0)::MI2C_Init FCD_I2C_Master0_MI2C_Init(); //Component Macro Aanroepen //Component Macro Aanroepen: I2C_Master(0)::MI2C_Start FCD_I2C_Master0_MI2C_Start(); //Component Macro Aanroepen //Component Macro Aanroepen: I2C_Master(0)::MI2C_Transmit_Byte(0xD0) FCD_I2C_Master0_MI2C_Transmit_Byte(0xD0); //Component Macro Aanroepen //Component Macro Aanroepen: I2C_Master(0)::MI2C_Transmit_Byte(0) FCD_I2C_Master0_MI2C_Transmit_Byte(0); //Component Macro Aanroepen //Component Macro Aanroepen: I2C_Master(0)::MI2C_Transmit_Byte(0b00000000) FCD_I2C_Master0_MI2C_Transmit_Byte(0b00000000); //Component Macro Aanroepen //Component Macro Aanroepen: I2C_Master(0)::MI2C_Stop FCD_I2C_Master0_MI2C_Stop(); } void main() { //Initialisatie adcon1 = 0x07; //Interrupt initialisatie code option_reg = 0xC0; //Call Macro //Call Macro: Startup FCM_Startup(); //Call Macro //Call Macro: BuildUP_Display FCM_BuildUP_Display(); //Call Macro //Call Macro: Preparing FCM_Preparing(); //Call Macro //Call Macro: I2C_Bus_Init FCM_I2C_Bus_Init(); //Delay //Delay: 1 s delay_s(1); //Loop //Loop: While 1 while (1) { //Call Macro //Call Macro: Time_Date_DS1307 FCM_Time_Date_DS1307(); //Call Macro //Call Macro: Display_Time FCM_Display_Time(); } mainendloop: goto mainendloop; } void MX_INTERRUPT_MACRO(void) { }