[Device]
FlowcodeProduct=AVR
ChipName=at90s2343
AltChipName=2343
Pins=8
Ports=2
ADCPins=0
ADCBits=0
MaxClock=20000000
PrescalerBits=3
ClockDivider=1
TimerOverflow=256
ConfigAddress=0x0000
ConfigCount=1
PWMCount=0

[Pins]
Pin1="RESET"
Pin2="(CLOCK) PB3"
Pin3="PB4"
Pin4="Gnd"
Pin5="PB0 (MOSI)"
Pin6="PB1 (MISO/INT0)"
Pin7="PB2 (SCK/T0)"
Pin8="Vcc"

[Ports]
PortPin2=0x0103
PortPin3=0x0104
PortPin5=0x0100
PortPin6=0x0101
PortPin7=0x0102

[PortMasks]
PortMask0=0x00
PortMask1=0x1f

[Code]
;Substitute macros
;%c Clock Speed
;%o Operand
;%s Prescaler
;%p PortID
;%m MaskBits
;%i Inverse Mask
;%a ADC channel
;%a Config Address
;%v Config Value
;%r Interrupt Flag Register
;%b Interrupt Flag Bit
;%n Interrupt Macro Name
Directives="#define F_CPU %cUL\n#include <avr\io.h>\n#include <avr\interrupt.h>\n#include <avr\eeprom.h>\n#include <MX_util\delay.h>\n#include <MX_util\bit_cmds.h>\n"
MainStart="int main()\n{\n"
MainEnd="\tmainendloop: goto mainendloop;\n}\n\n"
IntStart=""
IntEnd=""
Initialise="MCUCR=0x0a;\n\tWDTCR=0x10;\n"
IntInit="GIMSK=0x00;\n\n"
InputCmdFull="DDR%p = DDR%p & %i;\n%o = PIN%p;\n"
InputCmdOneBit="DDR%p = DDR%p & %i;\n%o = ((PIN%p & %m) == %m);\n"
InputCmdMask="DDR%p = DDR%p & %i;\n%o = PIN%p & %m;\n"
OutputCmdFull="DDR%p = 0xFF;\nPORT%p = %o;\n"
OutputCmdOneBit="DDR%p = DDR%p | %m;\nif (%o)\n\tPORT%p = (PORT%p & %i) | %m;\nelse\n\tPORT%p = PORT%p & %i;\n"
OutputCmdMask="DDR%p = DDR%p | %m;\nPORT%p = (PORT%p & %i) | %o;\n"
DelayCmdS="delay_s(%o);\n"
DelayCmdMs="delay_ms(%o);\n"
InitialPortLetter="A"
ConfigData="#pragma DATA %a, %v\n"
IntHandler=

[Defines]
Define1=#define MX_AVR
Define2=#define MX_EE
Define3=#define MX_EE_SIZE 128

[Interrupts]
GeneralInit="sei();\n"
Count=2
1=TMR0
2=INT0

[TMR0]
;it is vital that this section remains exactly as-is (for all chips?)
Name=(this is retrieved from the resource file)
UseExplicitHandlerCode=1
FlagReg=
FlagBit=
HandlerCode="ISR(TIMER0_OVF_vect)\n{\n\tFCM_%n();\n}\n"
UseExplicitEnableCode=1
EnReg=
EnBit=
EnableCode="TIMSK |= (1 << TOIE0);\n"
DisableCode="TIMSK &= ~(1 << TOIE0);\n"
OptCnt=1
TmrOpt=1
Opt1="Clock Source & Prescaler Select"
Opt1Cnt=8
Opt1_1="no clock"
Opt1_1Val="TCCR0 &= 0xf8;\n"
Opt1_2="1:1"
Opt1_2Val="TCCR0 &= 0xf8;\nTCCR0 |= 0x01;\n"
Opt1_3="1:8"
Opt1_3Val="TCCR0 &= 0xf8;\nTCCR0 |= 0x02;\n"
Opt1_4="1:64"
Opt1_4Val="TCCR0 &= 0xf8;\nTCCR0 |= 0x03;\n"
Opt1_5="1:256"
Opt1_5Val="TCCR0 &= 0xf8;\nTCCR0 |= 0x04;\n"
Opt1_6="1:1024"
Opt1_6Val="TCCR0 &= 0xf8;\nTCCR0 |= 0x05;\n"
Opt1_7="T0 pin, -ve edge"
Opt1_7Val="TCCR0 &= 0xf8;\nTCCR0 |= 0x06;\n"
Opt1_8="T0 pin, +ve edge"
Opt1_8Val="TCCR0 &= 0xf8;\nTCCR0 |= 0x07;\n"

[INT0]
Name="INT0 Input"
UseExplicitHandlerCode=1
FlagReg=
FlagBit=
HandlerCode="ISR(INT0_vect)\n{\n\tFCM_%n();\n}\n"
UseExplicitEnableCode=1
EnReg=
EnBit=
EnableCode="GIMSK |= (1 << INT0);\n"
DisableCode="GIMSK &= ~(1 << INT0);\n"
IntPort=3
IntPin=2
OptCnt=1
TmrOpt=0
Opt1="Interrupt Edge Select"
Opt1Cnt=2
Opt1_1="rising edge of INT0"
Opt1_1Val="MCUCR |= (1 << ISC01) | (1 << ISC00);\n"
Opt1_2="falling edge of INT0"
Opt1_2Val="MCUCR |= (1 << ISC01);\nMCUCR &= ~(1 << ISC00);\n"