Matrix user forums

Thank's very much for your quick help and teach.

Sorry if J don't understand your answere.
J use for compiling boostc delivered with FlowCode.
In FlowCode simulation leds are blinking with Debug = 0 or Debug = 1.

Thank's for the quick answer.
The problem is that in simutation there is no difference !

With the attached code if Debug =0 Leds are always ON, if Debug = 1 they are blinking.
Debug = 0 use var bool, Debug = 1 use Int.
Doe's my coding is frong in using var bool ?

J create a var MyVar[12] and init it in the project expolrer as "1234567890AB"
Compile give the error: "Too many initializers"
If J change MyVar[12] to MyVar[13] or if J init it with "" compiling is OK.

J did a few tests, it seem to be OK.
Thank's.

EB006-00-7 + EB037-00-1 + PIC18F4525 + FC 5.1 + SD Card Fat 16 (4 pieces):
Init_Fat() always return 255 !
Thank's for a quick help.

"a small number of faulty units have been shipped in error" !
How many have been shipped not faulty ?
"we will contact you and the other recipients shortly" !
My first mail about this pb is dated 9 february 2012 !

Patch for french is OK.
Thank's.

Same problem for french.
Thank's.

J have the same problems with 18F46K22.
Using EB-006-00-7 and FlowCode V5, !MCLR disabled, Single-Supply ICSP disabled.

Compiling OK.
Merci.

Compiling Test01.fcf to HEX give the error:
Test01.c(128:11): error: ',' expected
In Test01.c J read:
void FCM_HM2Txt2(MX_CHAR* FCR_RETVAL, MX_UINT8 FC_HM2TXT2_SZ_RETURN)
{

MX_CHAR

//Calcul
//Calcul:
// .Return = "abcdef"
FCI_SCOPY("abcdef",6, FCR_RETVAL,FC_HM2TXT2_SZ_RETURN);

}

What the ...

Compil to C OK but error while compiling to HEX.
-1 In MX_UINT8 Scan_Current_Folde r:
if (Read_Byte_From_Buffer((Idx) + 2) == 0x00)
return MX_ACK_FILEEMPTY; //Address is empty
in MX_SINT16 FCD_FAT160_Scan_Current_Folder:
if (Read_Byte_From_Buffer((Idx) + 2) == 0x00)
return MX_ACK_FILEEMPTY ...

Ok to add the file to the main one wire example download.
J made an other change in the macro TempToStr.
In the Custom_Code.c J rename CUSTOM_Dummy_Function() to ONEW_Dummy_Function() because of a conflict with other component.

Tests OK.
The new code you send works fine with my 16x4 LCD dispaly.

J got my LCD from "Electronique Diffusion", http://www.elecdif.com.
Ref. for ElecDif is "OPLCD4X16C".
Ref. on the display is "ECM 1604C-RN-YBS".
J can't find doc. on web for this display.
It works fine with the change J made.

Sorry J found an other bug in my 1WMultiDS.fcf.
In macro TempToStr, for DS18B20 and negative temperature, the resulte was
1 Β°C too low.

2 errors corrected in 1WMultiDS.fcf
Switch D0 erased (No use).
In macro TempToStr, bit 0 does'nt add 625 to rest.

With a 16x4 lcd display lines 2 and 3 are shifted of 4 postitions.
J modifie LCDDisplay_Code.c and now it's ok.

Old code:
void Cursor(char x, char y)
{
/*Macro_Curseur_Start*/
/*Macro_Cursor_Start*/

#if (%j == 1)
y=0x80;
#endif

#if (%j == 2)
if (y==0)
y=0x80;
else
y=0xc0;
#endif

#if ...

Hello Ben.
J used to read temps 8 x DS18 (5 x DS18S20 and 3 x DS18B20).
Only 2 to 4 DS18 were detected.It depend of wich DS18 were connected.
So j ad a macro called 1W_get_IDByte, 2 param (Num of the device and num of the byte to be return).
It return the byte of the lasered rom code stored in ...

J am french, sorry for my english.
After a lot of test, j found bugs in NEXT code.
Attached OneWireMultiDS.zip with: Custom_Code_1W_get_IDByte.c, that is custom_code.c modified with one macro added.
1WMultiDS.fcf for test.