Matrix user forums

Hello Benj,

thank you very much, for help.
This workaround works fine.

best regards
Andreas

Hello,

I have a problem with RC5 Component.
My Flowchart run with 16F877A don't with 16F877
I need the Function with the 16F877 (without "A"). Can anybody help me for a running solution?

Here the compiler Message:


Launching the compiler...
c:\program files (x86)\matrix multimedia\flowcode v4 ...

watch this.....

http://www.matrixmultimedia.com/mmforums/viewtopic.php?f=29&t=9074&p=28583#p28584

Hello,

V5 should support all hardware PWM channels on all devices.

Well saying this there is currently a maximum of 8, I'll probably up this to 10 in the C code as I think there are some 18F ...

Hello matrix Team,
does V5 support 3 PWM Channels?

Hallo Jürgen,
wenn es "nur" darum geht den PIC nicht ausbauen zu müssen, könntest Du diesen
doch via ICSP programmieren.

Gruß Andreas

Hello Benj,
vielen Dank für den schnellen Support.

Schau doch mal in den Projekt-Optionen, ob Du auch die richtige Taktfrequenz dort eingetragen ist.
Benutzt Du einen Quarz?

Hello Benj,
vielen Dank für das Beispiel.
Ist es damit auch möglich das Toggle Bit auszulesen?

Gruß Andreas

Hallo @ all,
in der Version 4.5 gibt es ja jetzt das RC5 Component.
Gibt es auch dazu schon Beispieldateien oder irgendwo eine Erklärung
wie die Makros zu benutzen sind? Hat von Euch schon jemand erfolgreich damit gearbeitet?

Für Informationen wäre ich Euch dankbar.
In erster Linie würde ich gerne ...

Hello Benj,
thank you for Info.
So I hope you can find the Problem with this Family.
At this time i will work with 16f886, is this chip working correct with flowcode4 and ppp?

Hello Martin,
The 4MHz is correct, it is an xtal.
Thank you very much for your help. I hope Steve has any Idea for the problem with this Pic.

Hi Andreas.
I'm assuming you have EB006 programmer?

Yes, I have this programmer


Have you tried using autodetect from the Chip configure menu? If it fails then I believe there is a problem with communication between USB and target device.
I can think of a few things that could cause that ...

Hi Matrix Team,
i will be programming a 16F722.
The ppp Porgramm type
Programming failed: <config1> <config2>
I have switch to Expert Config Screen and I have selected 16F722.
can anybody help me please?

best regards Andreas

Thank you for information, Benj.

Hello Benj,
thank you for help.

[quote="Benj"
This signifies the number of attempts to try and wait for incoming data before returning a timeout value of 255. If data is received then the macro will return immediatley.[/quote]
Is this time in [ms] ?

Regards
Andreas

Hello @ all,
great Article Steve. Your Master and Node code run perfect.
I have some question..
- When I send more than one byte, must i set a delay between the RS232 Makros ? Have anybody an example for me, please?
- For what are the Number in the rs232 recieve makro (nTimeout)
in your example are ...

Hello Benj,
thank you for your fast answer.

Hello @ all,
i have more than three boards with microcontroller.
One 16f877 with 14,745600 MHz Quarz
and two 16f88 with 4 MHz Quarz.
My Question, is it possible to connect this three boards via Rs485 and 9600baud
or must be all Microcontroller with the same value of Quarz to run the RS485?

Greetz ...

Hello Benj,
thank you for your reply and this good news.
So I will patiently wait times.

Hello Matrix-Team,
I'm very intrested for the board EB063.
Are example code for V4 PIC available?

best regards
Andreas

woh, thank you for this fast reply.

If i use the Hitech compiler 9.65 and compile a Flowjob with a Switch Icon and than a jump to another Point,
then i have this message:

clock_13.c: FCM_progg_untermenue()
3379: break;
^ (345) unreachable code (warning)
3389: break;
^ (345) unreachable code (warning)
3399: break;
^ (345 ...

Hello medelec,
thank you for the example files.
Now I understand the makros and can finish my project.
You are the Best. Thank you for help .

Thank you very much for your help medelec.
That is it.

Regards Andreas

Hello medelec,
thank you for help and sorry for my english.
My message to display are 26types long.
Yes it is correct,
I will start at 0,0 (left side) than scroll right, the message disappears out at the right
and then it starts again in the left side. Than agin and again....