Matrix user forums

Benj,

The clock is running even slower now judging by the LED delays and the signal is no longer showing up on the OCSO pin. Any ideas? Thanks

Benj,

We tried writing to the OSCCON register and reading back the values on the LED. What we get back is 0x7700 for the register value. Taking a look at the PIC24FJ256GB110 data sheet that means that flowcode is programming the pic to have the oscillator set to the 'Fast RC Oscillator with ...

Benj,

Here is the program we're testing with at the moment. Is there anyway we can write to the registers? Regardless if we're using the internal or external clock the 'clock speed' we have to choose in flowcode is 4MHz to get the proper 1 second delay meaning somewhere the Fosc is getting divided ...

And here is the scope image of the osc pin

Another thing we is that the signal on the oscillator pin doesn't look like an oscillator, it looks like a clock of 2MHz even though its wired to an 8MHz source. Here is a picture from the scope and chip configuration window

Benj,

We did did what you suggested and we found out that our clock is actually running at 4MHz. The issue is when switching between the XTAL and the FRC source there is no change in the frequecy both run at 4MHz regardless. We also switched between the FRC source and the FRCDIV and still nothing ...

Hi, I'm using a PIC24FJ256GB110 and having some issues with switching the oscillator sources. Right now I have a 8MhZ external oscillator but when probing the OSC pin I only see a signal of 2MHz.

In addition I've made a simple ocde to fash the LEDS on the board with no delay, when viewing the ...