proto type pcb for 40 pin ic's
Posted: Sat May 12, 2012 6:32 am
Prototype PCB 40 way
Here is the schematic and the .sch file (again crompressed with 7 zip) not had chance to route the pcb yet
These PCB’s are all very Similar in design and allow for 3.5 or 5 volt dc operation
With a 9 way socket to allow an eblock to be fitted if required.
With a prototyping area for development and terminal blocks for interfacing.
The files are made in eagle 6.01 a licence to open 160 x 80 mm files may be required (hobbyist or greater)
Files are compressed with 7-Zip Please change .txt to .7z as a file ext as wasn't allowed to upload attachment
http://www.7-zip.org/
Steve
Here is the schematic and the .sch file (again crompressed with 7 zip) not had chance to route the pcb yet
These PCB’s are all very Similar in design and allow for 3.5 or 5 volt dc operation
With a 9 way socket to allow an eblock to be fitted if required.
With a prototyping area for development and terminal blocks for interfacing.
The files are made in eagle 6.01 a licence to open 160 x 80 mm files may be required (hobbyist or greater)
Files are compressed with 7-Zip Please change .txt to .7z as a file ext as wasn't allowed to upload attachment
http://www.7-zip.org/
Steve