Page 1 of 1
PWM component is almost ready
Posted: Tue Feb 27, 2007 6:34 pm
by Steve
The PWM component is almost ready. Are there any "early adopters" who want to try it out before I package it up for a proper release?
Please contact me or Ben if you feel like being a guinea pig...
Posted: Tue Feb 27, 2007 7:50 pm
by ALAN_26
Hi steve
I CAN TRY IT NO PROBLEM JUST SEND IT .
THANKS
Posted: Wed Feb 28, 2007 6:18 am
by Chet
I'd be happy to give it a go over
Posted: Wed Feb 28, 2007 3:38 pm
by Mark
Hi Steve,
Count me in.
Mark
Posted: Fri Mar 02, 2007 5:34 pm
by ALAN_26
hi steve
I'v try the PWM component and i can say it worsk fine on pic16f877a and on pic18f452 .
From 0 to 100% duty cycle with NO problems At all.
THANKS FOR THE FINE RELEASE !!!
Posted: Fri Mar 02, 2007 5:52 pm
by Steve
I'm about to send out a new version of the PWM component. It combines both PWM outputs in the same component, adds labels and allows changes to the period on the fly (e.g. for tone generation).
If this one works well, I'll write a help file and package it up in a new release of Flowcode (to be released in the next few weeks).
Posted: Thu Mar 08, 2007 2:25 pm
by Simo
Hello Steve,
I 'm very keen to try the PWM component on a PIC18F4550 and PIC16F873a
Can I try itr out
Posted: Fri Mar 09, 2007 5:31 pm
by goldwingers
Hi Steve, I would like to try the unit out, please tell me how to get hold of it..
Regards
Ian
Posted: Fri Mar 09, 2007 5:46 pm
by Steve
Thanks to everyone who's tried this component out - it seems to work (at least no-one has told me otherwise), so I will include it in the next Flowcode update.
Posted: Fri Mar 09, 2007 8:06 pm
by PINTO
Hi Steve,
I'm trying to convert a value into a frequency (0 to 100Khz) to output to VFC (LM331) via an optocoupler and get a 0 to 10v output.
It would be a good chance for me to try the PWM component.
Would it be possible to have a copy of the component?
Regads
Pinto
PWM
Posted: Tue Mar 20, 2007 11:00 pm
by bugmike25
Hi, i would also like to try out the PWM component.
Thanks.
Posted: Mon Mar 26, 2007 4:18 am
by FCCHow
I would like to try out the PWM component too for the PIC16F628A to dim and light up LEDs.
V2 flowcode
Posted: Mon Mar 26, 2007 4:32 pm
by bugmike25
Can this component be used with Flowcode V2?
Posted: Wed Mar 28, 2007 9:28 am
by Benj
Hello Bugmike
Im afraid the PWM component will only work with V3 of Flowcode as it is written using the new BoostC compiler.
Posted: Wed Apr 04, 2007 4:26 am
by FCCHow
Here you go. I have used the sample PWM module and modified a bit to glow an LED on the PIC16F628A. Please ignore the sound as my daughter was curious and took me a lot of takes to get a decent video
http://chowfookcheong.blogspot.com/2007/04/pwm.html
Posted: Wed Apr 04, 2007 10:52 am
by Benj
Hello Thanks for the video. Great to see enthusiasts out there using our product.
Posted: Mon Apr 09, 2007 6:48 am
by FCCHow
You're welcome. Now, I want to take this a step further.
Electroluminescent material needs an alternating voltage from 50volts to 220volts and uses a 2.5mA per sq inch or material.
Since I am not so familiar in PWM, is it possible to amplify the sinusoidal wave from the PIC and then make the EL media glow?