Page 1 of 1
Need help with RFID 125 Khz Hitag S2048 transponder.
Posted: Tue Jan 14, 2014 3:23 pm
by Mathy
Hello,
I made some tests with the RFID component.
I have a 125 Khz Hitag S2048 transponder and I can read the 4 bytes with the READ_RFID_UID command.
It works very well.
Now, I'm trying to read the 16 bytes with the READ_RFID_BLOCK command but It doesn't work.
I think I don't understand very well what means the address and the key_type macro.
Is it possible to have additional information ?
Thank you for your help
Re: Need help with RFID 125 Khz Hitag S2048 transponder.
Posted: Tue Jan 14, 2014 5:23 pm
by Mathy
Re,
I think there is a problem in your code because in the RFID module datasheet, we need to send 0x72 to execute the READ_RFID_BLOCK command and flowcode send 0x52 like in the READ_RFID_UID command.
If I replace 0x52 by 0x72, it still don't work and i don't know if it is because of a bug ar because i don't understand how works the macro.
Is it possible to have a look a this ?
Thank you
Re: Need help with RFID 125 Khz Hitag S2048 transponder.
Posted: Wed Jan 15, 2014 10:03 am
by Mathy
I think i have spotted the problem.
I don't know if It is made in the rules but you can see here the new component c file :
Code: Select all
/*Macro_Read_RFID_Block_Start*/
MX_UINT8 RetVal;
MX_UINT8 UID_Val = 0;
{
//125 Khz
{
RFID_SendRS232Char(MX_RFID_READ_BLOCKH); //Send Read Block Command
RFID_SendRS232Char(Address); //
RetVal = %a_UART_Receive(200); //Collect response
if ((RetVal & 0x06) == 0x06) //if Read command succsesful
{
%a_MX_RFID_In_Buff[0] = %a_UART_Receive(200); //Collect LS Byte response
%a_MX_RFID_In_Buff[1] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[2] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[3] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[4] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[5] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[6] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[7] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[8] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[9] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[10] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[11] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[12] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[13] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[14] = %a_UART_Receive(200);
%a_MX_RFID_In_Buff[15] = %a_UART_Receive(200); //Collect MS Byte response
}
return RetVal;
}
}