Matrix user forums

Hi all,

I'm getting "error 1" message while compiling the attached program.

The compiler message is like this,

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Target folder: H:\INTERF~1
Source name: H:\Interface\PWM.fcfx
Title:
Description:
Device: PIC.16F.16F1508
Generated by: Flowcode v6.1.2.0
Date: Monday, August 24, 2015 22:21:50
Users: 1
Registered to: ***************
Licence key: ******
http://www.flowcode.co.uk
Launching the compiler...
Launching BoostC...
Completed BoostC compilation, return = 1



FINISHED

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

The oscillator is set external @ 19.660MHz

Kindly help me to resolve this issue.....

Regards,
San

Hi all,

Even the "RS232" macro is throwing the "Error 1" while compiling.
There seems to be many issues with the 16f1508.fcdx file

I'm struck halfway in a project & hoping for some help.

Regards,
Sanjay

Hi Sanjay,
I'll have a look at updating the CAL for this chip and get back to you as soon as possible.
Leigh

Hi
Please try this updated PWM CAL,, place in your Flowcode 6\CAL\PIC directory.
Regards,
Leigh
ps. next the RS232 ....

Here's a fix for the 16F1508 UART ...

Hi Leigh,

After the update, the RS232 macro is working & the PWM is throwing "error 2"

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
http://www.flowcode.co.uk
Launching the compiler...
C:\Program Files\Flowcode 6\compilers\pic\boostc\boostc_16F.exe -v -t PIC16F1508 "PWM.c"
Launching BoostC...
.............................................................................................................................
Completed BoostC compilation, return = 0

Launching the linker/assembler...
C:\Program Files\Flowcode 6\compilers\pic\boostc\boostlink_picmicro.exe -ld "C:\Program Files\Flowcode 6\compilers\pic\boostc\lib" libc_16F.lib rand_16F.lib float_16F.lib "PWM.obj" -t PIC16F1508 -d "H:\C_ENTR~1\INTERF~1" -p "PWM" -swcs 6 2
BoostLink Optimizing Linker Version 7.20
http://www.sourceboost.com
Copyright(C) 2004-2013 Pavel Baranov
Copyright(C) 2004-2013 David Hobday


Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external symbol, function:FC_CAL_PWM_ChangePeriod_1
Error: Unresolved external function:'FC_CAL_PWM_ChangePeriod_1(unsigned char,unsigned short)'
Error: Unresolved external symbol, function:FC_CAL_PWM_ChangePeriod_1
........


failure

C:\Program Files\Flowcode 6\compilers\pic\boostc\boostlink_picmicro.exe reported error code -2


FINISHED
----------------------------------------------------------------------------------------------------------------------------------------------------------------------

Kindly advice on this issue.

Regards,
Sanjay

Hi Sanjay,

Sorry about that. I fixed our head revision, but it's 2 months since our last release and there have been a few changes in the components (but not yet released).
So I've attached the latest components, these will match with the CAL code.
Please copy these component files to the Flowcode 6 \components directory, might be worth doing a backup of the old versions first

Let me know if you have any issues, in which case I'll have to roll back to a previous CAL version, and fix that instead.

Regards,
Leigh

Hi Leigh,

After updating the component, PWM is working fine.

Kindly let me know how to enable RXINT, as the option is not there on the Interrupt macro or provide me any sample working FC program to receive UART data on interrupt.

Regards,
Sanjay

Hi
Attached is an updated fcd with a UART interrupt for the 16F1508, place it in your Flowcode 6\FCD\PIC directory.
You will need to create, and specify in the interrupt enable, a new macro to run on interrupt.
This macro will then need to call ReceiveChar and place the character received into a buffer.
To help with that, there is a Circular Buffer component.
I don't have any samples, but a search on this forum will come up with a few, such as
http://www.flowcode.co.uk/mmforums/viewtopic.php?p=33484

Leigh

Hi Leigh,

Thanks for the update. UART Int is working fine without any issues.
Kindly provide the PWM & UART updates for 16F1509.

Regards,
Sanjay

Thanks for letting us know that it works.
Here is the 16F1509 fcd ...

Hi all,

I'm getting "error 1" message while compiling the attached program when SPI is on Channel 1.

The compiler message is like this,

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Target folder: H:\Clock\nRF
Source name: H:\Clock\nRF\16F1508_SPI_Test.fcfx
Title:
Description:
Device: PIC.16F.16F1508
Generated by: Flowcode v6.1.2.0
Date: Wednesday, June 01, 2016 07:10:22
Users: 1
Registered to: 30day_67332800
Licence key: U5VWEK
http://www.flowcode.co.uk
Launching the compiler...
C:\Program Files\Flowcode 6\compilers\pic\boostc\boostc_16F.exe -v -t PIC16F1508 "16F1508_SPI_Test.c"
Launching BoostC...
........................................................................................................................
Completed BoostC compilation, return = 1

C:\Program Files\Flowcode 6\compilers\pic\boostc\boostc_16F.exe reported error code 1


FINISHED

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

& the same program compiles OK when software SPI is selected.

The oscillator is set external @ 19.660MHz

Kindly help me to resolve this issue.....

Regards,
San

Looks like an error in Boostc header file
we don't normally edit their files, but here's a quick fix attached
drop in into
Flowcode6..... \compilers\pic\boostc\include

Hello,

I'm getting "error 1" message while compiling the attached program with GPS Macro.
Kindly help.

San

Hi San,
Could you PM your compiler output please? (GPS.msg.txt)
As it works OK on my installation.

Thanks
Leigh