Matrix user forums

Hi,
Same as with FC6, Using standard setting the CAN transmits at half the required speed.
To make it work on the bench I changed Register CxCTRL1 from 0x0800 to 0x0000
bit 11 = 0 //FCAN is equal to Fp, Datasheet page 362.

This works for my setup running at 1Mbit, not checked anything else as yet.
Regards, J.

The controller on the ECIO 40P16 has a silicon issue which reverses that particular bit. May-be a property can be introduced to allow users to determine activation of a work-around. (Hard coding would work as long as Microchip does not release fixed silicon)

See errata for devices affected.