Matrix user forums

Hello

CPU 32MS250

My config settings are as follows:

#pragma config FNOSC = FRCPLL
#pragma config FPLLIDIV = DIV_2
#pragma config FPLLMUL = MUL_20
#pragma config FPLLODIV = DIV_2
#pragma config FPBDIV = DIV_1

#pragma config DEBUG = OFF

#define GetSystemClock() (40000000ul)
#define GetPeripheralClock() (GetSystemClock())

#include <plib.h>

My config settings for UART are as follows:
channel 2, Baud_List = 9600, DBit = 8bit,TXRemap = PORT B4, RXRemap = PORT A1.
The bits are too slow on Port B4.

With my settings
U2MODEbits.BRGH = 1;
U2BRG = 84;
The data is transferred with 9600 baud

What I am doing as wrong.
Please Can You help me

Hello,

CPU 32MS250

Really not sure what chip you mean by this. Can you please double check this is correct.

The CPU ist 32MX250

Sounds like this is linked to the clock issue you're having. If you fix that then this should also be fixed.

We've overcome a number of... 'challenges' getting the UART baud rate and associated registers correct for a given clock frequency with this PIC family.

The following information may possibly be of some assistance when working with these complex new devices...

http://stackoverflow.com/questions/1770 ... -baud-rate

http://www.microchip.com/forums/m824389.aspx

http://www.microchip.com.tw/Data_CD/Ref ... 20UART.pdf


Best regards,

Brendan