Matrix user forums

I'll try to explain what I want.
at the start of the program I want to auto search for i2s address and store the result in EEprom. So far all good. (here I have lcd_I2C1 as a dummy to be able to find a addreses).
Here comes the problem.
I now want to start the lcd_I2C2 component with LCD Address from eeprom. This I can not find out how to do.

is there anyone who can help me with this?
https://dl.dropboxusercontent.com/u/209 ... anner.fcfx

Hello,

I have looked at the component source, there is a SetI2CAddress macro but it had not been exposed in the component.

So I have now exposed the macro for you and you should be able to access it by copying the file below to your "Flowcode 6/Components" folder and restarting Flowcode.
The Set Address macro must be called before you call the Start macro.

Let us know how you get on.

Here is the same fix done for v7,

Thanks Benj this worked perfectly

Benj wrote:Hello,

I have looked at the component source, there is a SetI2CAddress macro but it had not been exposed in the component.

So I have now exposed the macro for you and you should be able to access it by copying the file below to your "Flowcode 6/Components" folder and restarting Flowcode.

lcd_I2C.fcpx

The Set Address macro must be called before you call the Start macro.

Let us know how you get on.

Hi Benj,
I use a Flowcode 5, here I have a LCD I2C, cant find an address.
Maybe u have component file of LCD I2C to Flowcode 5.
I tried to program on Flowcode 6 but it works (show on LCD) on simulation, on hardware doesn't work.
Please help

Hello,

Have you tried other addresses than 27?