Compiler HEX File too big
Posted: Tue Mar 19, 2019 8:38 am
Hello,
i have build a little test project to show differents between compilers different flowcode versions.
If i use flowcode v.5 i have no Problems. If the project is bigger the different is bigger too. Is it possible
to use compiler from flowcode v.5 with flowcode v.8?
thanks
Dirk
i have build a little test project to show differents between compilers different flowcode versions.
The Project is complete the same. If i used flowcode v.6 or v.8 my Projects are too big for space in chips.V5:
RAM available:1024 bytes, used:62 bytes (6.1%), free:962 bytes (93.9%),
Heap size:336 bytes, Heap max single alloc:95 bytes
ROM available:8192 words, used:974 words (11.9%), free:7218 words (88.1%)
V6:
RAM available:1024 bytes, used:67 bytes (6.6%), free:957 bytes (93.4%),
Heap size:336 bytes, Heap max single alloc:95 bytes
ROM available:8192 words, used:1424 words (17.4%), free:6768 words (82.6%)
V8:
Memory Summary:
Program space used 567h ( 1383) of 2000h words ( 16.9%)
Data space used 4Ah ( 74) of 3F0h bytes ( 7.3%)
EEPROM space used 10h ( 16) of 100h bytes ( 6.2%)
Data stack space used 0h ( 0) of 3B2h bytes ( 0.0%)
Configuration bits used 2h ( 2) of 2h words (100.0%)
ID Location space used 0h ( 0) of 4h bytes ( 0.0%)
You have compiled in FREE mode.
Using Omniscient Code Generation that is available in PRO mode,
you could have produced up to 60% smaller and 400% faster code.
See http://www.microchip.com/MPLABXCcompilers for more information.
Compilation successful!
Start von Linker/Assembler...
C:\Program Files (x86)\Flowcode v8\tools\DoNothing\DoNothing.exe
If i use flowcode v.5 i have no Problems. If the project is bigger the different is bigger too. Is it possible
to use compiler from flowcode v.5 with flowcode v.8?
thanks
Dirk