Matrix user forums

Hey everyone, I am quite new to this and require your help!
I am using Flowcode 4 and 2 PIC 18F4520

What I have to do is this. There are 8 switches on Port B (one each byte)on a PIC(1) and I have to somehow send the signals of when they are pressed via serial to another PIC(2) which has 8 LED's on the PORT C. So when switch 1 is pressed on PIC 1, LED 1 come on on PIC 2.

I have absolutely no idea how to go about this and require your help!
I have a feeling I might need to use variables somehow maybe (Variable1=port B), I literally have no idea as I am am a complete beginner!

I would really appreciate any help you could give me and look forward to your replies!

If you are using Flowcode v4, you should sing up to that forum and ask your questions there .

http://www.matrixmultimedia.com/mmforum ... =29&t=6524

Btw, if you are a beginner I suggest you to start with easy stuff (not that this is too complicated).

Thanks for the reply! I will post there aswell!
I have no time to start with anything!! I just need this done and I won't need to look at flowcode again!

Could you help me!!?