Matrix user forums

Hello,

and thanks for your replies..

Here are my findings on your suggestions:
[dazz] The IOC port change didn't make a differnce, couldn't get the INT to work.
[enamul] To update to the latest version is always a good idea, but I was confinced that it must be working with the older version and a ...

Hello,

I have some smaller projects and would like to use the 12F683 with INTerrupt possibilities,
I have the same problem(s) as stated in 2009 with Flowcode 3. My version is Flowcode V4 en is (still) showing me the RB0INT lables
instead of GP, And I cant get the INT pin, or as a matter of fact ...

Hi All,

I figured it out myself, It's quite simple, (In my case) DONT rename PIC_Custom.c to Custom_Code.c.
As mentioned at the Custom Components page, Flowcode 4 uses PIC_Custom.c file(s).

o' and by the way, There is no RESET line defined, mine is active low and already connected.
Two options ...

Hello,

I tried to compile to chip the beta component GLCD KS0108,
the only thing I get is:

LCD Print TestV4.c(168:2): error: unknown identifier 'FCD_Custom0_LCD_Init
LCD Print TestV4.c(168:2): error: failed to generate expression
LCD Print TestV4.c(178:2): error: unknown identifier 'FCD_Custom0 ...

Hello Ben,

Thanks for the E-Block testfiles for version 4.

regards Frank

Hello Ben,

Sorry fot the late reply,
The code doesn't work, and I wanted to try some other options.

The problem lies with the %s_COLCNT, the %s must be substituted by the unique
number that the LCD component gets (by the linker ?)

If I replace the %s by that number in the functioncall in flowcode ...

Hello Ben,

Thanks for your reply, I didn't think it would be usefull to test it on the hardware,
because the simulation didn't work. I will try it today (sunday) and will let you know.

regards Frank,

Hello,

For a neat scrolling effect regarding the LCD, I'am in need of the Columns (and rows) used by the LCD. (16, 20, 40, 80)

So far I tried to use C Code and the variable %s_COLCNT (used by the LCD macro's) to assign to the flowcode variable Xp.

and to create a custom LCD macro getcol (return ...

Thanks for your reply,

I'm happy to hear that it's just a conversion issue of older v2 files,
For a moment I was a bit worried, especially when there are just readers and no repliers,
that’s why I also placed the questions at the E-Blocks section (sorry for that).
The advantage of the supplied ...

Goodday,

I purchased Flowcode in march together with the e-blocks switch, led and lcd.
The cd contains flowcode version, 4.2.3.58 had to upgrade to 4.3.7.63 because some
icons were misplaced. In my opinion all components are working, I can place them and
edit there connections.

Last week I ...

Goodday,

I purchased Flowcode in march together with the e-blocks switch, led and lcd.
The cd contains flowcode version, 4.2.3.58 had to upgrade to 4.3.7.63 because some
icons were misplaced. In my opinion all components are working, I can place them and
edit there connections.

Last week I ...

Goodday,

Ik would like to "transfer" flowcode 4.2 from my regular pc to my laptop.

How about the licensekeys that I entered and received, is this gonna work (again)?.
Or must I install flowcode on my laptop, enter key and ask for a new 2nd key?
(and of course remove from regular pc.)

in short ...