Can't connect VNET

[MJU]

I have Flowcode 4.1.1.55 and two flowcode files with a CAN project. (CAN1project.fcf and CAN2project.fcf)
I've tested this with two Eblocks hardware boards and it works.

Now I wanted to test it in the VNET environment but while trying I can not connect the two flowcode files.

I have the article on how to set these up, but can't connect the two files.

What I did is start the VNET exe (FlowServer.exe), and checked if the IP is the same in the properties as the one of this computer. (196.168.1.2). I left the portnumber as it was. The server is running.

The client name was set in the "CreateVnet"
Then I opened my CAN1project.fcf and made a VNET connection named "connection". (message: that the new connection is established). Added node "CAN (0)" to expose.
Now I left this file open and started a new Flowcode session with CAN2project.fcf.

In VNET options the IP and port number is the same as in CAN1project.fcf.
When I click VNET-> Join Vnet, and choose the "connection", press Join, I get the message that this can't be done.

What's wrong?

Can it be that because the CAN modules are both called CAN (0)?
Do I have to set the IP of the second node to another IP number?
Do I have to make two connections, with two names?
Other?

Any help is welcome.
Note that my version is another language so some names can be diffrent from the English one.

[MJU]

After typing the above I dived back into the knowledge exchange article.

I found what I did wrong.
In the second program I needed to create a new client with a different name..
What I did was use the same as the first.

Sorry for the inconvenience.

[Benj]

Hello

Thanks for letting us know, Great news your up and running with the Vnet now.