using flowkit with ECIO

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 4.
To post in this forum you must have a registered copy of Flowcode 4 or higher. To sign up for this forum topic please use the "Online Resources" link in the Flowcode Help Menu.

Moderator: Benj

Post Reply
mimiyum
Posts: 94
Joined: Wed Jul 16, 2008 4:39 pm
Location: Philippines
Been thanked: 1 time
Contact:
Contact mimiyum

using flowkit with ECIO

Post by mimiyum »

Hello,

Do you have any examples on using the flowkit with ECIO. I tried a simple program on the ECIO-28 and attached it to the flowkit. It says "COULD NOT COMMUNICATE
WITH ICD. PLEASE CONNECT AN APPROPRIATE ICD UNIT (EG. EB006 V7) AND TRY AGAIN.

Does this mean I have to connect it to the EB-006? should my EB-006 be V7? I have a V6. What settings should we look out for? Can I use the EB061 instead?

Thanks!
Mimiyum
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: using flowkit with ECIO

Post by Benj »

Hello Mimiyum,

The FlowKIT should work fine with the ECIO. The default ICD connections for the ECIO device are via the USB. Eg you have a second USB cable connecting the FlowKIT to the ECIO. Then you use the switch on the FlowKIT to control whether you are using ICD or programming the ECIO. If you are using USB in your program or wish to use pin onnections instead then you can change the pin settings in the project options window of Flowcode.

You can also use the FlowKIT on your v6 EB006 if you require for debugging.

The FlowKIT datasheet should contain all the information you require to get you up and running.
http://www.matrixmultimedia.com/datashe ... 9-30-1.pdf
Top
Post Reply

Return to “Flowcode V4”