Get keypadnum_to lcd.

[nuwan5213]

Hi all,
i want to 3digit number display using keypad and lcd.
i tryed hours to create flow code and no results,my tric was get number and disply,time delay,moove curaer then get another number so on.
is it simiulator problem or any trick with kepad number gettig?
please help.

[Sean]

If you are using the GetKeypadNumber keypad macro, the value returned can not be displayed directly using the PrintASCII macro, you will need to use the PrintNumber macro.

Using the GetKeypadAscii macro will return individual characters that can be displayed using PrintASCII

[medelec35]

Will this help you?
http://www.matrixmultimedia.com/mmforum ... 140#p17448

[Spanish_dude]

Hi,
If I remember well, the GetKeypadNumber returns 255 when no button is pressed, so what you could do is this :

Code: Select all

char counter, number;
int value = 0;

// some code 

counter = 0;
value = 0;

while (counter < 2)
{
    number = GetKeypadNumber();

    if (number != 255 && number < 10)
    {
        value = value* 10 + number;
        counter = counter + 1;
    }
}

// print value on LCD

I haven't added comments to the program like I usually do when I write one, because I think this is easy to understand. (I'll explain if needed)

Nicolas

EDIT:
I added "&& number < 10" because in the simulation, the * and # is read as a 10 and 11 so we don't want that.

[nuwan5213]

Hi medelec,
thanks for link. Ok now the problem is cannot get number 11,22,33...like that.what are the modifications to get same digit repeated number.?,
sorry for spell mistake .im posting with my mobile devise.
regards,
nuwan

[medelec35]

Hi. nuwan5213
I have put a basic flowchart together for Flowcode V4.
You can enter one or two numbers (can easily expand to accommodate more numbers)
Total is stored in a variable called Value.
Press # to reset.
If you want to do something different them please let me know so I can alter flowchart for you.

With This one you need to enter the two digits seperatly e.g 33, 16 etc.
I can change it if you just want to press a sinlge 3 and value would be asigned with 33

Note: In both cases, you will need alter the target device, osc speed and configuation settings to suit your application.

Martin

[medelec35]

More basic version. Rather than change it , I decided to post it any way.
Just press a single digit e.g 5, then Value Variable will be 55 and display will also show 55

Martin

[nuwan5213]

Hi,
medelec thanks.problem solved.

[medelec35]

That's great. Thanks for letting us know.

Martin