Dual CAN ports on the 30G6012A?

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 4.
To post in this forum you must have a registered copy of Flowcode 4 or higher. To sign up for this forum topic please use the "Online Resources" link in the Flowcode Help Menu.

Moderator: Benj

Post Reply
beambase
Posts: 94
Joined: Wed Jul 29, 2009 5:15 pm
Has thanked: 6 times
Been thanked: 8 times

Dual CAN ports on the 30G6012A?

Post by beambase »

I am doing a project on a 30F6012A with FC ds24 version 4.3.

Is it possible to enable both the internal CAN controllers that is built in to the 30F6012A? I have CAN1 successfuly working.
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: Dual CAN ports on the 30G6012A?

Post by Benj »

Hello,

This is not something Flowcode can do directly but if your C knowledge is ok then you may be able to take the code for channel 1 and use this to compile together your own channel 2 code. In the most case it will be taking register names eg xxx1xxx and renaming to xxx2xxx.
Top
Post Reply

Return to “Flowcode V4”