I use Flowcode V7.1.1.0 and i try upload code in Arduino UNO R3 (PDIP). I see error:
But with latest Arduino software, i can successful upload sketch in to UNO R3 board without any errors!
Code: Select all
Target folder: C:
Source name: C:\Flowcode1.fcfx
Title:
Description:
Device: AVR.ATMEGA.ATMEGA328P
Generated by: Flowcode v7.1.1.0
Date: Friday, October 07, 2016 11:03:02
Users: 1
Registered to:
Licence key: *****
NOT FOR COMMERCIAL USE
http://www.flowcode.co.uk
Launching the compiler...
C:\Program Files\Flowcode 7\compilers\avr\batchfiles\avra.bat atmega328p "C:\Flowcode1.elf" "C:\Flowcode1.c" "C:\Flowcode1.lst"
Launching compiler...
C:\Users\Stein\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-gcc.exe" -mmcu=atmega328p -Os -funsigned-char -o "C:\Flowcode1.elf" "C:\Flowcode1.c" -lm
C:\Users\Stein\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-objdump.exe" -S "C:\Flowcode1.elf" 1>"C:\Flowcode1.lst"
C:\Users\Stein\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-size.exe" -B -d "C:\Flowcode1.elf"
text data bss dec hex filename
704 0 22 726 2d6 C:\Flowcode1.elf
Compilation successful!
Completed compilation, return = 0
Launching the linker/assembler...
C:\Program Files\Flowcode 7\compilers\avr\batchfiles\avrb.bat "C:\Flowcode1.elf" "C:\Flowcode1.hex" "C:\Flowcode1.cof"
C:\Users\Stein\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-objcopy" -O ihex -R .eeprom "C:\Flowcode1.elf" "C:\Flowcode1.hex"
HEX file creation successful!
C:\Users\Stein\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avr-objcopy" -O coff-avr -R .eeprom "C:\Flowcode1.elf" "C:\Flowcode1.cof"
COFF file creation successful!
Launching the programmer...
C:\Program Files\Flowcode 7\compilers\avr\batchfiles\avrc_arduinoA.bat m328p arduino com7 115200 "Flowcode1.hex"
C:\Users\Stein\Desktop>"C:\PROGRA~1\FLOWCO~1\COMPIL~1\avr\BATCHF~1\..\bin\avrdude.exe" -p m328p -P com7 -b 115200 -c arduino -U flash:w:"Flowcode1.hex"
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude.exe: Device signature = 0x1e950f
avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: reading input file "Flowcode1.hex"
avrdude.exe: error opening Flowcode1.hex: No such file or directory
avrdude.exe: input file Flowcode1.hex auto detected as invalid format
avrdude.exe: can't open input file Flowcode1.hex: No such file or directory
avrdude.exe: read from file 'Flowcode1.hex' failed
avrdude.exe done. Thank you.
Error returned from [avrdude]
C:\Program Files\Flowcode 7\compilers\avr\batchfiles\avrc_arduinoA.bat reported error code 1
FINISHED
