Hi all.
I recently discovered that the above mentioned component(RFID_MFRC522_V2) is no longer remappable? If I choose for example ch 2 then all com pins are locked to RG6-RG7-RG8. but pin SS and Reset can still be remapped.
My target: 33EP512MU814
Is this a bug or done by purpose?
Best regards
Nick
RFID_MFRC522_V2 non remappable?
Moderator: Benj
-
electronix
- Posts: 58
- Joined: Sat Aug 22, 2009 5:45 pm
- Has thanked: 17 times
- Been thanked: 7 times
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: RFID_MFRC522_V2 non remappable?
Hi Nick,
SPI channel 2 has fixed pins and is not remappable on the 33EP512MU814 device.
This is a limitation of the device silicone rather then a problem with Flowcode. Channels 1, 3 and 4 do have the remappable functionality.
SPI channel 2 has fixed pins and is not remappable on the 33EP512MU814 device.
This is a limitation of the device silicone rather then a problem with Flowcode. Channels 1, 3 and 4 do have the remappable functionality.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
electronix
- Posts: 58
- Joined: Sat Aug 22, 2009 5:45 pm
- Has thanked: 17 times
- Been thanked: 7 times
Re: RFID_MFRC522_V2 non remappable?
Hi Ben☺
Thanks for clearing that one so quick for me ☺.
Best regards
Nick
Thanks for clearing that one so quick for me ☺.
Best regards
Nick