Page 1 of 1
5" LCD
Posted: Sat Mar 09, 2019 7:16 pm
by Daytun Unitt
HI all, I am looking for a 5" LCD panel or larger, up to 7" that works reliably with flowcode 8 and the uno platform.
I need 8 pins unused on the uno to include A0 and A1, the others do not matter.
Does anyone know a decent, reliable and cheap LCD that fits this?
Thanks
Re: 5" LCD
Posted: Sun Mar 10, 2019 3:42 pm
by chipfryer27
Hi
Whilst I don't know much about Arduino (should really take the time though) I'm perhaps not best placed to answer, but a quick google pulled up some info on an Arduino forum. It gave details of 5" displays and also suggested that the Uno wasn't best suited to driving such.
This may be of help to you
https://forum.arduino.cc/index.php?topic=492441.0
Regards
Re: 5" LCD
Posted: Sun Mar 10, 2019 9:49 pm
by viktor_au
Hi Daytun Unitt
Did you check the list of displays in FC8 Menu->Displays->GLCD Base?
And if you did (glcd_ssd1963 thread) why do you ask again?
Re: 5" LCD
Posted: Sun Mar 10, 2019 9:53 pm
by viktor_au
If you are going to use Arduino IDE:
Re: 5" LCD
Posted: Mon Mar 11, 2019 10:48 am
by stefan.erni
Hi
I used a STM32F469 Disco Board complet with 4" touchscreen.
It was a good price, less than 60 euro and comfortable to use with Flowcode. The Arduino standard connectors are there an still free to use.
4 inches 800x480 pixel TFT color LCD with
MIPI DSI interface and capacitive touch screen
https://www.digikey.ch/product-detail/d ... gLSCPD_BwE
viewtopic.php?f=63&t=19306&hilit=disco
Re: 5" LCD
Posted: Sat Mar 16, 2019 12:59 pm
by Daytun Unitt
"Hi Daytun Unitt
Did you check the list of displays in FC8 Menu->Displays->GLCD Base?
And if you did (glcd_ssd1963 thread) why do you ask again?"
I asked specifically if anyone knows of a make and model as the thread you referenced clearly states that it only works with some makes/models. not all with that driver.