18F4455 and RFID

[mmuehr]

Hi all,
I´ve sone trouble to get the RFID examples running on a 18F4455( in this ex.2)

I use the following configuration:

status byte on Port D
LCD on Port A
RFID on Port C with Jumper C and 2 set, Protocol Mifare 1K/4K
EB006 with 18F4455, XTAL/Fast external PSU (I think 20MHz Crystal)

Ihe card is detected, but there is no change on the Status Port nor on the LCD.

My chip config see attachment

[Benj]

Hello,

Have you done a 1 second flasher test to ensure your clock speed and configuration settings are ok? My guess is that the clock speed in the project options window is not set to 48000000?

[mmuehr]

Thats it, Thanks.

BTW Is there a possibility to save project and chip settings as a template ?

[Benj]

Hello,

Great glad you got it working, thanks for letting us know.

Yes this is possible, Create a blank file and add your configuration and project options settings. Save the file with a informative title eg 18F4455_template and then when you need to create a new project simply open the file and then re-save as your new project name.