Difference between revisions of "Component: API (Arduino Mega) (API Slave Devices)"

Revision as of 09:52, 27 January 2023

Author	Matrix TSL
Version	2.0
Category	API Slave Devices

API (Arduino Mega) component

Connects to an Arduino Mega running the API Firmware allowing the board to become a slave to the Flowcode Embedded simulation or Flowcode App Developer. Supports: Digital IO / ADC / I2C / SPI / UART / PWM See Flowcode Help Wiki for firmware.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_Arduino_Mega_API_Comp.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_Arduino_Mega_API_Comp.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

	I2CInitialise
Initialsie the I2C module ready for communications
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	ADCSampleArray8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- BYTE	Samples
8-bit samples returned from the function
- VOID	Return

	SPITransferTrans
Transfer an array of bytes using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- UINT	Count
Number of bytes to send and receive
- BYTE	DataOut
Outgoing data
- BYTE	DataIn
Incoming data
- VOID	Return

	IOGetInputPin
Sets the selected digital pin to an input and reads the input state.
- BYTE	Pin
Range: 0-53
- BOOL	Return

	UARTBaud
Control the communications rate of the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Rate
0=1200, 1=2400, 2=4800, 3=9600, 4=19200, 5=38400, 6=57600, 7=115200
- VOID	Return

	ADCSample8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255
- BYTE	ADCChannel
Range: 0-15
- BYTE	Return

	I2CTransReceive
Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data variable to receive into
- UINT	Count
Number of bytes to receive
- UINT	Return

	UARTCheckRX
Check to see if the UART module has received any data
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	UARTInitialise
Initialise the UART module ready for communications
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- VOID	Return

	RegisterWrite
Writes to one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Data
The data value to assign to the register
- VOID	Return

	ADCSetPrechargeTime
Specifies the precharge time for the ADC input readings in microseconds. The longer the time the more immune to noise the reading will be.
- BYTE	ChargeTime
Default 10
- VOID	Return

	RegisterRead
Read one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Return

	I2CRestart
Put the I2C Module into Restart mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	PWMDisable
Disable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	I2CStart
Put the I2C Module into Start mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	SPITransfer
Transfer a byte using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	DataOut

- BYTE	Return

	I2CReceive
Receive a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BOOL	Last
Last byte to receive: Range 0-1
- BYTE	Return

	I2CStop
Put the I2C Module into Stop mode
- BYTE	Channel

- VOID	Return

	ADCSetReferenceVoltage
Specified the reference setting for ADC reads.
- BYTE	RefType
0=AREF, 1=VCC, 3=Internal 1.1V
- VOID	Return

	SPIPrescaler
Modify the speed of the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	Prescaler
Range: 0-2
- VOID	Return

	PWMSetDuty
Sets the duty for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Duty

- VOID	Return

	ADCSample10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023
- BYTE	ADCChannel
Range: 0-15
- UINT	Return

	I2CTransSend
Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data to send
- UINT	Count
Number of bytes to send out, MS bit 0x8000 signifies no Stop if set
- UINT	Return

	IOSetOutputPin
Sets the selected digital pin to an output and assigns the output state.
- BYTE	Pin
Range: 0-53
- BOOL	State
Range: 0-1
- VOID	Return

	UARTReceive
Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available.
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	ADCSampleAverage10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- UINT	Return

	I2CTransInit
Initialises the I2C Transaction mode with the 7-bit device address
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DeviceAddress
7-bit Device Address
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	SPIInitialise
Initialsie the SPI module ready for communications
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- VOID	Return

	I2CSend
Transmit a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DataOut

- BOOL	Return

	UARTSend
Send a byte via the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Data
Data Byte to send. Range: 0-255
- VOID	Return

	PWMSetPrescaler
Sets the prescaler for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Prescaler

- BYTE	Period
Default 255
- VOID	Return

	PWMEnable
Enable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	ADCSampleArray10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- UINT	Samples
10-bit samples returned from the function
- VOID	Return

	ADCSampleAverage8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- BYTE	Return

	Initialise
Initialise the comms to the Arduino board ready for commands to be sent.
- VOID	Return

Property reference

	Properties
	Connection
	COM Port
Lists all the current available COM port hardware on your PC.
	Refresh Ports

	API Peripherals
	Digital IO

	Analog Input

	Analog Output

	PWM Output

	I2C Bus

	SPI Bus

	UART

	Servo

	Console
	Console Log
Create an automatic console log of the commands sent to the Arduino
	Log Mode
Controls how the console data is formatted. Fixed statistics gives an easy to read overview of the IO, Analog and PWM functionality Command Log gives a more in depth analysis of the outgoing commands and incoming returns

==Macro reference==

	I2CInitialise
Initialsie the I2C module ready for communications
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	ADCSampleArray8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- BYTE	Samples
8-bit samples returned from the function
- VOID	Return

	SPITransferTrans
Transfer an array of bytes using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- UINT	Count
Number of bytes to send and receive
- BYTE	DataOut
Outgoing data
- BYTE	DataIn
Incoming data
- VOID	Return

	IOGetInputPin
Sets the selected digital pin to an input and reads the input state.
- BYTE	Pin
Range: 0-53
- BOOL	Return

	UARTBaud
Control the communications rate of the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Rate
0=1200, 1=2400, 2=4800, 3=9600, 4=19200, 5=38400, 6=57600, 7=115200
- VOID	Return

	ADCSample8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255
- BYTE	ADCChannel
Range: 0-15
- BYTE	Return

	I2CTransReceive
Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data variable to receive into
- UINT	Count
Number of bytes to receive
- UINT	Return

	UARTCheckRX
Check to see if the UART module has received any data
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	UARTInitialise
Initialise the UART module ready for communications
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- VOID	Return

	RegisterWrite
Writes to one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Data
The data value to assign to the register
- VOID	Return

	ADCSetPrechargeTime
Specifies the precharge time for the ADC input readings in microseconds. The longer the time the more immune to noise the reading will be.
- BYTE	ChargeTime
Default 10
- VOID	Return

	RegisterRead
Read one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Return

	I2CRestart
Put the I2C Module into Restart mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	PWMDisable
Disable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	I2CStart
Put the I2C Module into Start mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	SPITransfer
Transfer a byte using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	DataOut

- BYTE	Return

	I2CReceive
Receive a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BOOL	Last
Last byte to receive: Range 0-1
- BYTE	Return

	I2CStop
Put the I2C Module into Stop mode
- BYTE	Channel

- VOID	Return

	ADCSetReferenceVoltage
Specified the reference setting for ADC reads.
- BYTE	RefType
0=AREF, 1=VCC, 3=Internal 1.1V
- VOID	Return

	SPIPrescaler
Modify the speed of the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	Prescaler
Range: 0-2
- VOID	Return

	PWMSetDuty
Sets the duty for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Duty

- VOID	Return

	ADCSample10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023
- BYTE	ADCChannel
Range: 0-15
- UINT	Return

	I2CTransSend
Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data to send
- UINT	Count
Number of bytes to send out, MS bit 0x8000 signifies no Stop if set
- UINT	Return

	IOSetOutputPin
Sets the selected digital pin to an output and assigns the output state.
- BYTE	Pin
Range: 0-53
- BOOL	State
Range: 0-1
- VOID	Return

	UARTReceive
Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available.
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	ADCSampleAverage10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- UINT	Return

	I2CTransInit
Initialises the I2C Transaction mode with the 7-bit device address
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DeviceAddress
7-bit Device Address
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	SPIInitialise
Initialsie the SPI module ready for communications
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- VOID	Return

	I2CSend
Transmit a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DataOut

- BOOL	Return

	UARTSend
Send a byte via the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Data
Data Byte to send. Range: 0-255
- VOID	Return

	PWMSetPrescaler
Sets the prescaler for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Prescaler

- BYTE	Period
Default 255
- VOID	Return

	PWMEnable
Enable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	ADCSampleArray10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- UINT	Samples
10-bit samples returned from the function
- VOID	Return

	ADCSampleAverage8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- BYTE	Return

	Initialise
Initialise the comms to the Arduino board ready for commands to be sent.
- VOID	Return

Property reference

	Properties
	Connection
	COM Port
Lists all the current available COM port hardware on your PC.
	Refresh Ports

	API Peripherals
	Digital IO

	Analog Input

	Analog Output

	PWM Output

	I2C Bus

	SPI Bus

	UART

	Servo

	Console
	Console Log
Create an automatic console log of the commands sent to the Arduino
	Log Mode
Controls how the console data is formatted. Fixed statistics gives an easy to read overview of the IO, Analog and PWM functionality Command Log gives a more in depth analysis of the outgoing commands and incoming returns

==Macro reference==

	I2CInitialise
Initialsie the I2C module ready for communications
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	ADCSampleArray8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- BYTE	Samples
8-bit samples returned from the function
- VOID	Return

	SPITransferTrans
Transfer an array of bytes using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- UINT	Count
Number of bytes to send and receive
- BYTE	DataOut
Outgoing data
- BYTE	DataIn
Incoming data
- VOID	Return

	IOGetInputPin
Sets the selected digital pin to an input and reads the input state.
- BYTE	Pin
Range: 0-53
- BOOL	Return

	UARTBaud
Control the communications rate of the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Rate
0=1200, 1=2400, 2=4800, 3=9600, 4=19200, 5=38400, 6=57600, 7=115200
- VOID	Return

	ADCSample8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255
- BYTE	ADCChannel
Range: 0-15
- BYTE	Return

	I2CTransReceive
Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data variable to receive into
- UINT	Count
Number of bytes to receive
- UINT	Return

	UARTCheckRX
Check to see if the UART module has received any data
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	UARTInitialise
Initialise the UART module ready for communications
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- VOID	Return

	RegisterWrite
Writes to one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Data
The data value to assign to the register
- VOID	Return

	ADCSetPrechargeTime
Specifies the precharge time for the ADC input readings in microseconds. The longer the time the more immune to noise the reading will be.
- BYTE	ChargeTime
Default 10
- VOID	Return

	RegisterRead
Read one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Return

	I2CRestart
Put the I2C Module into Restart mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	PWMDisable
Disable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	I2CStart
Put the I2C Module into Start mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	SPITransfer
Transfer a byte using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	DataOut

- BYTE	Return

	I2CReceive
Receive a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BOOL	Last
Last byte to receive: Range 0-1
- BYTE	Return

	I2CStop
Put the I2C Module into Stop mode
- BYTE	Channel

- VOID	Return

	ADCSetReferenceVoltage
Specified the reference setting for ADC reads.
- BYTE	RefType
0=AREF, 1=VCC, 3=Internal 1.1V
- VOID	Return

	SPIPrescaler
Modify the speed of the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	Prescaler
Range: 0-2
- VOID	Return

	PWMSetDuty
Sets the duty for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Duty

- VOID	Return

	ADCSample10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023
- BYTE	ADCChannel
Range: 0-15
- UINT	Return

	I2CTransSend
Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data to send
- UINT	Count
Number of bytes to send out, MS bit 0x8000 signifies no Stop if set
- UINT	Return

	IOSetOutputPin
Sets the selected digital pin to an output and assigns the output state.
- BYTE	Pin
Range: 0-53
- BOOL	State
Range: 0-1
- VOID	Return

	UARTReceive
Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available.
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	ADCSampleAverage10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- UINT	Return

	I2CTransInit
Initialises the I2C Transaction mode with the 7-bit device address
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DeviceAddress
7-bit Device Address
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	SPIInitialise
Initialsie the SPI module ready for communications
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- VOID	Return

	I2CSend
Transmit a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DataOut

- BOOL	Return

	UARTSend
Send a byte via the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Data
Data Byte to send. Range: 0-255
- VOID	Return

	PWMSetPrescaler
Sets the prescaler for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Prescaler

- BYTE	Period
Default 255
- VOID	Return

	PWMEnable
Enable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	ADCSampleArray10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- UINT	Samples
10-bit samples returned from the function
- VOID	Return

	ADCSampleAverage8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- BYTE	Return

	Initialise
Initialise the comms to the Arduino board ready for commands to be sent.
- VOID	Return

Property reference

	Properties
	Connection
	COM Port
Lists all the current available COM port hardware on your PC.
	Refresh Ports

	API Peripherals
	Digital IO

	Analog Input

	Analog Output

	PWM Output

	I2C Bus

	SPI Bus

	UART

	Servo

	Console
	Console Log
Create an automatic console log of the commands sent to the Arduino
	Log Mode
Controls how the console data is formatted. Fixed statistics gives an easy to read overview of the IO, Analog and PWM functionality Command Log gives a more in depth analysis of the outgoing commands and incoming returns

==Macro reference==

	I2CInitialise
Initialsie the I2C module ready for communications
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	ADCSampleArray8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- BYTE	Samples
8-bit samples returned from the function
- VOID	Return

	SPITransferTrans
Transfer an array of bytes using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- UINT	Count
Number of bytes to send and receive
- BYTE	DataOut
Outgoing data
- BYTE	DataIn
Incoming data
- VOID	Return

	IOGetInputPin
Sets the selected digital pin to an input and reads the input state.
- BYTE	Pin
Range: 0-53
- BOOL	Return

	UARTBaud
Control the communications rate of the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Rate
0=1200, 1=2400, 2=4800, 3=9600, 4=19200, 5=38400, 6=57600, 7=115200
- VOID	Return

	ADCSample8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255
- BYTE	ADCChannel
Range: 0-15
- BYTE	Return

	I2CTransReceive
Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data variable to receive into
- UINT	Count
Number of bytes to receive
- UINT	Return

	UARTCheckRX
Check to see if the UART module has received any data
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	UARTInitialise
Initialise the UART module ready for communications
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- VOID	Return

	RegisterWrite
Writes to one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Data
The data value to assign to the register
- VOID	Return

	ADCSetPrechargeTime
Specifies the precharge time for the ADC input readings in microseconds. The longer the time the more immune to noise the reading will be.
- BYTE	ChargeTime
Default 10
- VOID	Return

	RegisterRead
Read one of the registers on-board the device
- UINT	RegisterAddress
The address of the register
- BYTE	Return

	I2CRestart
Put the I2C Module into Restart mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	PWMDisable
Disable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	I2CStart
Put the I2C Module into Start mode
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- VOID	Return

	SPITransfer
Transfer a byte using the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	DataOut

- BYTE	Return

	I2CReceive
Receive a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BOOL	Last
Last byte to receive: Range 0-1
- BYTE	Return

	I2CStop
Put the I2C Module into Stop mode
- BYTE	Channel

- VOID	Return

	ADCSetReferenceVoltage
Specified the reference setting for ADC reads.
- BYTE	RefType
0=AREF, 1=VCC, 3=Internal 1.1V
- VOID	Return

	SPIPrescaler
Modify the speed of the SPI bus
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- BYTE	Prescaler
Range: 0-2
- VOID	Return

	PWMSetDuty
Sets the duty for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Duty

- VOID	Return

	ADCSample10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023
- BYTE	ADCChannel
Range: 0-15
- UINT	Return

	I2CTransSend
Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent.
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	Data
Data to send
- UINT	Count
Number of bytes to send out, MS bit 0x8000 signifies no Stop if set
- UINT	Return

	IOSetOutputPin
Sets the selected digital pin to an output and assigns the output state.
- BYTE	Pin
Range: 0-53
- BOOL	State
Range: 0-1
- VOID	Return

	UARTReceive
Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available.
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Return

	ADCSampleAverage10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- UINT	Return

	I2CTransInit
Initialises the I2C Transaction mode with the 7-bit device address
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DeviceAddress
7-bit Device Address
- BYTE	Baud
0=100KHz, 1=400KHz, 2=1MHz
- VOID	Return

	SPIInitialise
Initialsie the SPI module ready for communications
- BYTE	Channel
Channel Index: Range 0 - SPI Bus Count - 1
- VOID	Return

	I2CSend
Transmit a byte using the I2C bus
- BYTE	Channel
Channel Index: Range 0 - I2C Bus Count - 1
- BYTE	DataOut

- BOOL	Return

	UARTSend
Send a byte via the UART module
- BYTE	Channel
Channel Index: Range 0 - UART Bus Count - 1
- BYTE	Data
Data Byte to send. Range: 0-255
- VOID	Return

	PWMSetPrescaler
Sets the prescaler for the PWM output
- BYTE	Channel
Range: 0-15
- BYTE	Prescaler

- BYTE	Period
Default 255
- VOID	Return

	PWMEnable
Enable a PWM output
- BYTE	Channel
Range: 0-15
- VOID	Return

	ADCSampleArray10
Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 32
- UINT	SampleDelay
Delay in us between each sample
- UINT	Samples
10-bit samples returned from the function
- VOID	Return

	ADCSampleAverage8
Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples
- BYTE	ADCChannel
Range: 0-5
- BYTE	SampleCount
Range: 1- 100
- BYTE	SampleDelay
Delay in us between each sample
- BYTE	Return

	Initialise
Initialise the comms to the Arduino board ready for commands to be sent.
- VOID	Return

Property reference

	Properties
	Connection
	COM Port
Lists all the current available COM port hardware on your PC.
	Refresh Ports

	API Peripherals
	Digital IO

	Analog Input

	Analog Output

	PWM Output

	I2C Bus

	SPI Bus

	UART

	Servo

	Console
	Console Log
Create an automatic console log of the commands sent to the Arduino
	Log Mode
Controls how the console data is formatted. Fixed statistics gives an easy to read overview of the IO, Analog and PWM functionality Command Log gives a more in depth analysis of the outgoing commands and incoming returns

Difference between revisions of "Component: API (Arduino Mega) (API Slave Devices)"

Revision as of 09:52, 27 January 2023

Contents

API (Arduino Mega) component

Component Source Code

Detailed description

Examples

Macro reference

Property reference

Property reference

Property reference

Property reference

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools

@@ Line 17: / Line 17: @@
 ==Component Source Code==
-Please click here to download the component source project: [https://www.flowcode.co.uk/wikicopy/componentsource/FC_Comp_Source_Arduino_Mega_API_Comp.fcfx FC_Comp_Source_Arduino_Mega_API_Comp.fcfx]
+Please click here to download the component source project: [https://www.flowcode.co.uk/wiki/componentsource/FC_Comp_Source_Arduino_Mega_API_Comp.fcfx FC_Comp_Source_Arduino_Mega_API_Comp.fcfx]
 Please click here to view the component source code (Beta): [https://www.flowcode.co.uk/FlowchartView/?wfile=componentsource/FC_Comp_Source_Arduino_Mega_API_Comp.fcfx FC_Comp_Source_Arduino_Mega_API_Comp.fcfx]
 ==Detailed description==
@@ Line 32: / Line 34: @@
 ==Examples==
@@ Line 42: / Line 46: @@
 ==Macro reference==
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CInitialise'''
+|-
+| colspan="2" | Initialsie the I2C module ready for communications&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Baud
+|-
+| colspan="2" | 0=100KHz, 1=400KHz, 2=1MHz&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleArray8'''
+|-
+| colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ADCChannel
+|-
+| colspan="2" | Range: 0-5&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | SampleCount
+|-
+| colspan="2" | Range: 1- 32&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | SampleDelay
+|-
+| colspan="2" | Delay in us between each sample&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Samples
+|-
+| colspan="2" | 8-bit samples returned from the function&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPITransferTrans'''
+|-
+| colspan="2" | Transfer an array of bytes using the SPI bus&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | Count
+|-
+| colspan="2" | Number of bytes to send and receive&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | DataOut
+|-
+| colspan="2" | Outgoing data&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | DataIn
+|-
+| colspan="2" | Incoming data&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IOGetInputPin'''
+|-
+| colspan="2" | Sets the selected digital pin to an input and reads the input state.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Pin
+|-
+| colspan="2" | Range: 0-53&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-bool-icon.png]] - BOOL
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTBaud'''
+|-
+| colspan="2" | Control the communications rate of the UART module&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Rate
+|-
+| colspan="2" | 0=1200, 1=2400, 2=4800, 3=9600, 4=19200, 5=38400, 6=57600, 7=115200&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSample8'''
+|-
+| colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ADCChannel
+|-
+| colspan="2" | Range: 0-15&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransReceive'''
+|-
+| colspan="2" | Receives an I2C Transaction on the selected I2C channel. Returns the number of bytes received.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Data
+|-
+| colspan="2" | Data variable to receive into&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | Count
+|-
+| colspan="2" | Number of bytes to receive&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTCheckRX'''
+|-
+| colspan="2" | Check to see if the UART module has received any data&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTInitialise'''
+|-
+| colspan="2" | Initialise the UART module ready for communications&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RegisterWrite'''
+|-
+| colspan="2" | Writes to one of the registers on-board the device&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | RegisterAddress
+|-
+| colspan="2" | The address of the register&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Data
+|-
+| colspan="2" | The data value to assign to the register&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSetPrechargeTime'''
+|-
+| colspan="2" | Specifies the precharge time for the ADC input readings in microseconds. The longer the time the more immune to noise the reading will be.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ChargeTime
+|-
+| colspan="2" | Default 10&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RegisterRead'''
+|-
+| colspan="2" | Read one of the registers on-board the device&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | RegisterAddress
+|-
+| colspan="2" | The address of the register&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CRestart'''
+|-
+| colspan="2" | Put the I2C Module into Restart mode&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMDisable'''
+|-
+| colspan="2" | Disable a PWM output&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Range: 0-15&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CStart'''
+|-
+| colspan="2" | Put the I2C Module into Start mode&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPITransfer'''
+|-
+| colspan="2" | Transfer a byte using the SPI bus&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | DataOut
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CReceive'''
+|-
+| colspan="2" | Receive a byte using the I2C bus&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-bool-icon.png]] - BOOL
+| width="90%" | Last
+|-
+| colspan="2" | Last byte to receive: Range 0-1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CStop'''
+|-
+| colspan="2" | Put the I2C Module into Stop mode&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSetReferenceVoltage'''
+|-
+| colspan="2" | Specified the reference setting for ADC reads.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | RefType
+|-
+| colspan="2" | 0=AREF, 1=VCC, 3=Internal 1.1V&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIPrescaler'''
+|-
+| colspan="2" | Modify the speed of the SPI bus&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Prescaler
+|-
+| colspan="2" | Range: 0-2&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetDuty'''
+|-
+| colspan="2" | Sets the duty for the PWM output&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Range: 0-15&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Duty
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSample10'''
+|-
+| colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ADCChannel
+|-
+| colspan="2" | Range: 0-15&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransSend'''
+|-
+| colspan="2" | Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Data
+|-
+| colspan="2" | Data to send&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | Count
+|-
+| colspan="2" | Number of bytes to send out, MS bit 0x8000 signifies no Stop if set&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IOSetOutputPin'''
+|-
+| colspan="2" | Sets the selected digital pin to an output and assigns the output state.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Pin
+|-
+| colspan="2" | Range: 0-53&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-bool-icon.png]] - BOOL
+| width="90%" | State
+|-
+| colspan="2" | Range: 0-1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTReceive'''
+|-
+| colspan="2" | Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage10'''
+|-
+| colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ADCChannel
+|-
+| colspan="2" | Range: 0-5&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | SampleCount
+|-
+| colspan="2" | Range: 1- 100&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | SampleDelay
+|-
+| colspan="2" | Delay in us between each sample&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransInit'''
+|-
+| colspan="2" | Initialises the I2C Transaction mode with the 7-bit device address&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | DeviceAddress
+|-
+| colspan="2" | 7-bit Device Address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Baud
+|-
+| colspan="2" | 0=100KHz, 1=400KHz, 2=1MHz&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIInitialise'''
+|-
+| colspan="2" | Initialsie the SPI module ready for communications&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CSend'''
+|-
+| colspan="2" | Transmit a byte using the I2C bus&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | DataOut
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-bool-icon.png]] - BOOL
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTSend'''
+|-
+| colspan="2" | Send a byte via the UART module&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Data
+|-
+| colspan="2" | Data Byte to send. Range: 0-255&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetPrescaler'''
+|-
+| colspan="2" | Sets the prescaler for the PWM output&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Range: 0-15&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Prescaler
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Period
+|-
+| colspan="2" | Default 255&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMEnable'''
+|-
+| colspan="2" | Enable a PWM output&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Range: 0-15&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleArray10'''
+|-
+| colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ADCChannel
+|-
+| colspan="2" | Range: 0-5&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | SampleCount
+|-
+| colspan="2" | Range: 1- 32&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | SampleDelay
+|-
+| colspan="2" | Delay in us between each sample&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | Samples
+|-
+| colspan="2" | 10-bit samples returned from the function&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage8'''
+|-
+| colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ADCChannel
+|-
+| colspan="2" | Range: 0-5&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | SampleCount
+|-
+| colspan="2" | Range: 1- 100&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | SampleDelay
+|-
+| colspan="2" | Delay in us between each sample&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
+|-
+| colspan="2" | Initialise the comms to the Arduino board ready for commands to be sent.&nbsp;
+|-
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+==Property reference==
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties'''
+|-
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Connection
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
+| width="90%" | COM Port
+|-
+| colspan="2" | Lists all the current available COM port hardware on your PC.&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
+| width="90%" | Refresh Ports
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | API Peripherals
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | Digital IO
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | Analog Input
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | Analog Output
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | PWM Output
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | I2C Bus
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | SPI Bus
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | UART
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-21-icon.png]]
+| width="90%" | Servo
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Console
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
+| width="90%" | Console Log
+|-
+| colspan="2" | Create an automatic console log of the commands sent to the Arduino&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
+| width="90%" | Log Mode
+|-
+| colspan="2" | Controls how the console data is formatted. Fixed statistics gives an easy to read overview of the IO, Analog and PWM functionality Command Log gives a more in depth analysis of the outgoing commands and incoming returns&nbsp;
+|}==Macro reference==
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"