Difference between revisions of "Component: Combo Board (EB083) (E-blocks 1)"

Revision as of 09:55, 27 January 2023

Author	Matrix TSL
Version	1.0
Category	E-blocks 1

Combo Board component

A component to drive the EB083 Combo board including LEDs, Switches, LCD, 7-Segs and analogue inputs.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_EB086_DEMO.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_EB086_DEMO.fcfx

Detailed description

No detailed description exists yet for this component

Examples

The following files provide examples of how to use this component:

Arduino Mega 2560 & Combo Board

This blank project consists of the Matrix EB083 Combo Board connected to an Arduino Mega 2560.

Arduino Uno R3 & Combo Board

This blank project consists of the Matrix EB093 Combo Board connected to an Arduino Uno R3.

Note; Due to a limitation in the Arduino Uno hardware, portA6 & PortA7 are replicated from PortA5 in this template.

Macro reference

	Seg_ShowDigit
Displays a digit on the 7-seg display
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Value
The value to display (0 - 9)
- BYTE	DecimalPoint
Decides if the decimal point is lit
- VOID	Return

	LCD_PrintFormattedNumber
Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295
- ULONG	Number
Enter the number or variable to print to the LCD
- BOOL	Format
0=Signed, 1=Unsigned
- VOID	Return

	LCD_RemapCharacter
Assigns a remap character allowing the PrintString function to automatically swap between pre-defined characters. The characters can be custom (in the range 0-9) or can point to an existing character in the LCD character map.
- BYTE	RemapIdx
Remap Index, Range: 0 to (Remap Characters - 1)
- BYTE	SearchCharacter
Character to look for a replace
- BYTE	ReplacementCharacter
New character value to use in place of the search character.
- VOID	Return

	LCD_ScrollDisplay
Scrolls the display left or right by a number of given positions.
- BYTE	Position
Holds the number of positions to shift the display
- BYTE	Direction
0 = left, 1 = right
- VOID	Return

	IO_SetPort
Sets the state of a single port
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	Value

- VOID	Return

	IO_SetLEDState
Sets the state of a single LED
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	LED
0 = LED0, 7 = LED7
- BYTE	State
0 = Off, 1 = On
- VOID	Return

	LCD_PrintFloat
Print a Float number rounded up to a specified amount of decimal places.
- FLOAT	Number
Enter the number or variable to print to the LCD
- BYTE	DecimalPlaces
Enter how many decimal places to round up to (1 - 6)
- VOID	Return

	IO_GetPort
Reads the state of a single port
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Return

	LCD_Cursor
Moves the cursor on the LCD Display
- BYTE	x
Set the cursor position in the X plane, 0 is the left most cell
- BYTE	y
Set the cursor position in the Y plane, 0 is the top most cell
- VOID	Return

	Seg_ShowSegments
Allows the individual segments of the display to be controlled.
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Segments
8-bit Binary value to set the segments, bit0 = segA, bit1 = segB...
- VOID	Return

	LCD_Start
Startup routine required by the hardware device. Automatically clears the display after initialising.
- VOID	Return

	LCD_Command
Use this method/macro to send a specific command to the LCD. Refer to the Matrix Multimedia EB006 datasheet for a list of supported instructions. For Non-Matrix LCD's refer to the manufacturers datasheet.
- BYTE	instruction
Send a defined command to the LCD Screen. See datasheet for supported commands.
- VOID	Return

	LCD_RAMWrite
Modifies the internal memory of the LCD to allow for up to 8 customised characters to be created and stored in the device memory
- BYTE	Index
Values 0 to 7
- BYTE	d0

- BYTE	d1

- BYTE	d2

- BYTE	d3

- BYTE	d4

- BYTE	d5

- BYTE	d6

- BYTE	d7

- VOID	Return

	IO_ReadAnalogAsInt
Reads one of the analogue components as an Integer value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- INT	Return

	LCD_PrintString
Breaks down a string of text and sends it to the LCD via the private RawSend(byte, mask) macro
- STRING	Text
Enter the text or variable to print to the LCD
- VOID	Return

	LCD_ClearLine
Clears a single line on the display and then moves the cursor to the start of the line to allow you to start populating the line with data.
- BYTE	Line
The line to clear, zero being the first (top) line of the display
- VOID	Return

	IO_GetSwitchState
Reads the state of a single switch Returns: 0 = Switch not pressed, 1 = Switch pressed
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Switch
0 = SW0, 7 = SW7
- BYTE	Return

	IO_ReadAnalogAsByte
Reads one of the analogue components as an byte value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- BYTE	Return

	LCD_PrintAscii
Takes the ascii value for a character and prints the character
- BYTE	character
Holds an ascii value.
- VOID	Return

	LCD_PrintNumber
Based on v5 macro, will allow you to print a number. This is limited to a signed-INT, -32768 to 32767
- INT	Number
Enter the number or variable to print to the LCD
- VOID	Return

	LCD_RawSend
Sends data to the LCD display
- BYTE	data
The data byte to send to the LCD
- BOOL	type
A boolean to indicate command type: true to write data, false to write a command
- VOID	Return

	LCD_Clear
Clears the entire contents of the display.
- VOID	Return

Property reference

	Properties
	Connection Type

	Bank 0 Connections
	Bank 0

	Bank 1 Connections
	Bank 1

	Analog Connections
	Light Sensor
Light Sensor ADC channel Connected to Bank 0 pin 0 which is usually analog pin AN0.
	Potentiometer
Potentiometer ADC channel Connected to Bank 0 pin 1 which is usually analog pin AN1.
	Simulation
	Analog Scope Traces
Controls if traces are automatically added to the data recorder window for the analogue signals on the combo board.

==Macro reference==

	Seg_ShowDigit
Displays a digit on the 7-seg display
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Value
The value to display (0 - 9)
- BYTE	DecimalPoint
Decides if the decimal point is lit
- VOID	Return

	LCD_PrintFormattedNumber
Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295
- ULONG	Number
Enter the number or variable to print to the LCD
- BOOL	Format
0=Signed, 1=Unsigned
- VOID	Return

	LCD_RemapCharacter
Assigns a remap character allowing the PrintString function to automatically swap between pre-defined characters. The characters can be custom (in the range 0-9) or can point to an existing character in the LCD character map.
- BYTE	RemapIdx
Remap Index, Range: 0 to (Remap Characters - 1)
- BYTE	SearchCharacter
Character to look for a replace
- BYTE	ReplacementCharacter
New character value to use in place of the search character.
- VOID	Return

	LCD_ScrollDisplay
Scrolls the display left or right by a number of given positions.
- BYTE	Position
Holds the number of positions to shift the display
- BYTE	Direction
0 = left, 1 = right
- VOID	Return

	IO_SetPort
Sets the state of a single port
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	Value

- VOID	Return

	IO_SetLEDState
Sets the state of a single LED
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	LED
0 = LED0, 7 = LED7
- BYTE	State
0 = Off, 1 = On
- VOID	Return

	LCD_PrintFloat
Print a Float number rounded up to a specified amount of decimal places.
- FLOAT	Number
Enter the number or variable to print to the LCD
- BYTE	DecimalPlaces
Enter how many decimal places to round up to (1 - 6)
- VOID	Return

	IO_GetPort
Reads the state of a single port
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Return

	LCD_Cursor
Moves the cursor on the LCD Display
- BYTE	x
Set the cursor position in the X plane, 0 is the left most cell
- BYTE	y
Set the cursor position in the Y plane, 0 is the top most cell
- VOID	Return

	Seg_ShowSegments
Allows the individual segments of the display to be controlled.
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Segments
8-bit Binary value to set the segments, bit0 = segA, bit1 = segB...
- VOID	Return

	LCD_Start
Startup routine required by the hardware device. Automatically clears the display after initialising.
- VOID	Return

	LCD_Command
Use this method/macro to send a specific command to the LCD. Refer to the Matrix Multimedia EB006 datasheet for a list of supported instructions. For Non-Matrix LCD's refer to the manufacturers datasheet.
- BYTE	instruction
Send a defined command to the LCD Screen. See datasheet for supported commands.
- VOID	Return

	LCD_RAMWrite
Modifies the internal memory of the LCD to allow for up to 8 customised characters to be created and stored in the device memory
- BYTE	Index
Values 0 to 7
- BYTE	d0

- BYTE	d1

- BYTE	d2

- BYTE	d3

- BYTE	d4

- BYTE	d5

- BYTE	d6

- BYTE	d7

- VOID	Return

	IO_ReadAnalogAsInt
Reads one of the analogue components as an Integer value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- INT	Return

	LCD_PrintString
Breaks down a string of text and sends it to the LCD via the private RawSend(byte, mask) macro
- STRING	Text
Enter the text or variable to print to the LCD
- VOID	Return

	LCD_ClearLine
Clears a single line on the display and then moves the cursor to the start of the line to allow you to start populating the line with data.
- BYTE	Line
The line to clear, zero being the first (top) line of the display
- VOID	Return

	IO_GetSwitchState
Reads the state of a single switch Returns: 0 = Switch not pressed, 1 = Switch pressed
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Switch
0 = SW0, 7 = SW7
- BYTE	Return

	IO_ReadAnalogAsByte
Reads one of the analogue components as an byte value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- BYTE	Return

	LCD_PrintAscii
Takes the ascii value for a character and prints the character
- BYTE	character
Holds an ascii value.
- VOID	Return

	LCD_PrintNumber
Based on v5 macro, will allow you to print a number. This is limited to a signed-INT, -32768 to 32767
- INT	Number
Enter the number or variable to print to the LCD
- VOID	Return

	LCD_RawSend
Sends data to the LCD display
- BYTE	data
The data byte to send to the LCD
- BOOL	type
A boolean to indicate command type: true to write data, false to write a command
- VOID	Return

	LCD_Clear
Clears the entire contents of the display.
- VOID	Return

Property reference

	Properties
	Connection Type

	Bank 0 Connections
	Bank 0

	Bank 1 Connections
	Bank 1

	Analog Connections
	Light Sensor
Light Sensor ADC channel Connected to Bank 0 pin 0 which is usually analog pin AN0.
	Potentiometer
Potentiometer ADC channel Connected to Bank 0 pin 1 which is usually analog pin AN1.
	Simulation
	Analog Scope Traces
Controls if traces are automatically added to the data recorder window for the analogue signals on the combo board.

==Macro reference==

	Seg_ShowDigit
Displays a digit on the 7-seg display
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Value
The value to display (0 - 9)
- BYTE	DecimalPoint
Decides if the decimal point is lit
- VOID	Return

	LCD_PrintFormattedNumber
Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295
- ULONG	Number
Enter the number or variable to print to the LCD
- BOOL	Format
0=Signed, 1=Unsigned
- VOID	Return

	LCD_RemapCharacter
Assigns a remap character allowing the PrintString function to automatically swap between pre-defined characters. The characters can be custom (in the range 0-9) or can point to an existing character in the LCD character map.
- BYTE	RemapIdx
Remap Index, Range: 0 to (Remap Characters - 1)
- BYTE	SearchCharacter
Character to look for a replace
- BYTE	ReplacementCharacter
New character value to use in place of the search character.
- VOID	Return

	LCD_ScrollDisplay
Scrolls the display left or right by a number of given positions.
- BYTE	Position
Holds the number of positions to shift the display
- BYTE	Direction
0 = left, 1 = right
- VOID	Return

	IO_SetPort
Sets the state of a single port
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	Value

- VOID	Return

	IO_SetLEDState
Sets the state of a single LED
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	LED
0 = LED0, 7 = LED7
- BYTE	State
0 = Off, 1 = On
- VOID	Return

	LCD_PrintFloat
Print a Float number rounded up to a specified amount of decimal places.
- FLOAT	Number
Enter the number or variable to print to the LCD
- BYTE	DecimalPlaces
Enter how many decimal places to round up to (1 - 6)
- VOID	Return

	IO_GetPort
Reads the state of a single port
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Return

	LCD_Cursor
Moves the cursor on the LCD Display
- BYTE	x
Set the cursor position in the X plane, 0 is the left most cell
- BYTE	y
Set the cursor position in the Y plane, 0 is the top most cell
- VOID	Return

	Seg_ShowSegments
Allows the individual segments of the display to be controlled.
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Segments
8-bit Binary value to set the segments, bit0 = segA, bit1 = segB...
- VOID	Return

	LCD_Start
Startup routine required by the hardware device. Automatically clears the display after initialising.
- VOID	Return

	LCD_Command
Use this method/macro to send a specific command to the LCD. Refer to the Matrix Multimedia EB006 datasheet for a list of supported instructions. For Non-Matrix LCD's refer to the manufacturers datasheet.
- BYTE	instruction
Send a defined command to the LCD Screen. See datasheet for supported commands.
- VOID	Return

	LCD_RAMWrite
Modifies the internal memory of the LCD to allow for up to 8 customised characters to be created and stored in the device memory
- BYTE	Index
Values 0 to 7
- BYTE	d0

- BYTE	d1

- BYTE	d2

- BYTE	d3

- BYTE	d4

- BYTE	d5

- BYTE	d6

- BYTE	d7

- VOID	Return

	IO_ReadAnalogAsInt
Reads one of the analogue components as an Integer value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- INT	Return

	LCD_PrintString
Breaks down a string of text and sends it to the LCD via the private RawSend(byte, mask) macro
- STRING	Text
Enter the text or variable to print to the LCD
- VOID	Return

	LCD_ClearLine
Clears a single line on the display and then moves the cursor to the start of the line to allow you to start populating the line with data.
- BYTE	Line
The line to clear, zero being the first (top) line of the display
- VOID	Return

	IO_GetSwitchState
Reads the state of a single switch Returns: 0 = Switch not pressed, 1 = Switch pressed
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Switch
0 = SW0, 7 = SW7
- BYTE	Return

	IO_ReadAnalogAsByte
Reads one of the analogue components as an byte value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- BYTE	Return

	LCD_PrintAscii
Takes the ascii value for a character and prints the character
- BYTE	character
Holds an ascii value.
- VOID	Return

	LCD_PrintNumber
Based on v5 macro, will allow you to print a number. This is limited to a signed-INT, -32768 to 32767
- INT	Number
Enter the number or variable to print to the LCD
- VOID	Return

	LCD_RawSend
Sends data to the LCD display
- BYTE	data
The data byte to send to the LCD
- BOOL	type
A boolean to indicate command type: true to write data, false to write a command
- VOID	Return

	LCD_Clear
Clears the entire contents of the display.
- VOID	Return

Property reference

	Properties
	Connection Type

	Bank 0 Connections
	Bank 0

	Bank 1 Connections
	Bank 1

	Analog Connections
	Light Sensor
Light Sensor ADC channel Connected to Bank 0 pin 0 which is usually analog pin AN0.
	Potentiometer
Potentiometer ADC channel Connected to Bank 0 pin 1 which is usually analog pin AN1.
	Simulation
	Analog Scope Traces
Controls if traces are automatically added to the data recorder window for the analogue signals on the combo board.

==Macro reference==

	Seg_ShowDigit
Displays a digit on the 7-seg display
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Value
The value to display (0 - 9)
- BYTE	DecimalPoint
Decides if the decimal point is lit
- VOID	Return

	LCD_PrintFormattedNumber
Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295
- ULONG	Number
Enter the number or variable to print to the LCD
- BOOL	Format
0=Signed, 1=Unsigned
- VOID	Return

	LCD_RemapCharacter
Assigns a remap character allowing the PrintString function to automatically swap between pre-defined characters. The characters can be custom (in the range 0-9) or can point to an existing character in the LCD character map.
- BYTE	RemapIdx
Remap Index, Range: 0 to (Remap Characters - 1)
- BYTE	SearchCharacter
Character to look for a replace
- BYTE	ReplacementCharacter
New character value to use in place of the search character.
- VOID	Return

	LCD_ScrollDisplay
Scrolls the display left or right by a number of given positions.
- BYTE	Position
Holds the number of positions to shift the display
- BYTE	Direction
0 = left, 1 = right
- VOID	Return

	IO_SetPort
Sets the state of a single port
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	Value

- VOID	Return

	IO_SetLEDState
Sets the state of a single LED
- BYTE	Bank
0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs
- BYTE	LED
0 = LED0, 7 = LED7
- BYTE	State
0 = Off, 1 = On
- VOID	Return

	LCD_PrintFloat
Print a Float number rounded up to a specified amount of decimal places.
- FLOAT	Number
Enter the number or variable to print to the LCD
- BYTE	DecimalPlaces
Enter how many decimal places to round up to (1 - 6)
- VOID	Return

	IO_GetPort
Reads the state of a single port
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Return

	LCD_Cursor
Moves the cursor on the LCD Display
- BYTE	x
Set the cursor position in the X plane, 0 is the left most cell
- BYTE	y
Set the cursor position in the Y plane, 0 is the top most cell
- VOID	Return

	Seg_ShowSegments
Allows the individual segments of the display to be controlled.
- BYTE	Digit
Which of the digits to change (0 - 3)
- BYTE	Segments
8-bit Binary value to set the segments, bit0 = segA, bit1 = segB...
- VOID	Return

	LCD_Start
Startup routine required by the hardware device. Automatically clears the display after initialising.
- VOID	Return

	LCD_Command
Use this method/macro to send a specific command to the LCD. Refer to the Matrix Multimedia EB006 datasheet for a list of supported instructions. For Non-Matrix LCD's refer to the manufacturers datasheet.
- BYTE	instruction
Send a defined command to the LCD Screen. See datasheet for supported commands.
- VOID	Return

	LCD_RAMWrite
Modifies the internal memory of the LCD to allow for up to 8 customised characters to be created and stored in the device memory
- BYTE	Index
Values 0 to 7
- BYTE	d0

- BYTE	d1

- BYTE	d2

- BYTE	d3

- BYTE	d4

- BYTE	d5

- BYTE	d6

- BYTE	d7

- VOID	Return

	IO_ReadAnalogAsInt
Reads one of the analogue components as an Integer value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- INT	Return

	LCD_PrintString
Breaks down a string of text and sends it to the LCD via the private RawSend(byte, mask) macro
- STRING	Text
Enter the text or variable to print to the LCD
- VOID	Return

	LCD_ClearLine
Clears a single line on the display and then moves the cursor to the start of the line to allow you to start populating the line with data.
- BYTE	Line
The line to clear, zero being the first (top) line of the display
- VOID	Return

	IO_GetSwitchState
Reads the state of a single switch Returns: 0 = Switch not pressed, 1 = Switch pressed
- BYTE	Bank
0 = Top Bank of Switches, 1 = Bottom Bank of Switches
- BYTE	Switch
0 = SW0, 7 = SW7
- BYTE	Return

	IO_ReadAnalogAsByte
Reads one of the analogue components as an byte value
- BYTE	Channel
0 = Light Sensor, 1 = Potentiometer
- BYTE	Return

	LCD_PrintAscii
Takes the ascii value for a character and prints the character
- BYTE	character
Holds an ascii value.
- VOID	Return

	LCD_PrintNumber
Based on v5 macro, will allow you to print a number. This is limited to a signed-INT, -32768 to 32767
- INT	Number
Enter the number or variable to print to the LCD
- VOID	Return

	LCD_RawSend
Sends data to the LCD display
- BYTE	data
The data byte to send to the LCD
- BOOL	type
A boolean to indicate command type: true to write data, false to write a command
- VOID	Return

	LCD_Clear
Clears the entire contents of the display.
- VOID	Return

Property reference

	Properties
	Connection Type

	Bank 0 Connections
	Bank 0

	Bank 1 Connections
	Bank 1

	Analog Connections
	Light Sensor
Light Sensor ADC channel Connected to Bank 0 pin 0 which is usually analog pin AN0.
	Potentiometer
Potentiometer ADC channel Connected to Bank 0 pin 1 which is usually analog pin AN1.
	Simulation
	Analog Scope Traces
Controls if traces are automatically added to the data recorder window for the analogue signals on the combo board.

Difference between revisions of "Component: Combo Board (EB083) (E-blocks 1)"

Revision as of 09:55, 27 January 2023

Contents

Combo Board component

Component Source Code

Detailed description

Examples

Macro reference

Property reference

Property reference

Property reference

Property reference

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools

@@ Line 17: / Line 17: @@
 ==Component Source Code==
-Please click here to download the component source project: [https://www.flowcode.co.uk/wikicopy/componentsource/FC_Comp_Source_EB086_DEMO.fcfx FC_Comp_Source_EB086_DEMO.fcfx]
+Please click here to download the component source project: [https://www.flowcode.co.uk/wiki/componentsource/FC_Comp_Source_EB086_DEMO.fcfx FC_Comp_Source_EB086_DEMO.fcfx]
 Please click here to view the component source code (Beta): [https://www.flowcode.co.uk/FlowchartView/?wfile=componentsource/FC_Comp_Source_EB086_DEMO.fcfx FC_Comp_Source_EB086_DEMO.fcfx]
 ==Detailed description==
@@ Line 32: / Line 34: @@
 ==Examples==
@@ Line 56: / Line 60: @@
 ==Macro reference==
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Seg_ShowDigit'''
+|-
+| colspan="2" | Displays a digit on the 7-seg display &nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Digit
+|-
+| colspan="2" | Which of the digits to change (0 - 3)&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Value
+|-
+| colspan="2" | The value to display (0 - 9)&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | DecimalPoint
+|-
+| colspan="2" | Decides if the decimal point is lit&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_PrintFormattedNumber'''
+|-
+| colspan="2" | Will allow you to print a number up to 32-bits with signed or unsigned formatting. Signed = -2147483648 to 2147483647 Unsigned = 0 to 4294967295&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u32-icon.png]] - ULONG
+| width="90%" | Number
+|-
+| colspan="2" | Enter the number or variable to print to the LCD&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-bool-icon.png]] - BOOL
+| width="90%" | Format
+|-
+| colspan="2" | 0=Signed, 1=Unsigned&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_RemapCharacter'''
+|-
+| colspan="2" | Assigns a remap character allowing the PrintString function to automatically swap between pre-defined characters.  The characters can be custom (in the range 0-9) or can point to an existing character in the LCD character map.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | RemapIdx
+|-
+| colspan="2" | Remap Index, Range: 0 to (Remap Characters - 1)&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | SearchCharacter
+|-
+| colspan="2" | Character to look for a replace&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | ReplacementCharacter
+|-
+| colspan="2" | New character value to use in place of the search character.&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_ScrollDisplay'''
+|-
+| colspan="2" | Scrolls the display left or right by a number of given positions.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Position
+|-
+| colspan="2" | Holds the number of positions to shift the display&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Direction
+|-
+| colspan="2" | 0 = left, 1 = right&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IO_SetPort'''
+|-
+| colspan="2" | Sets the state of a single port&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Bank
+|-
+| colspan="2" | 0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Value
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IO_SetLEDState'''
+|-
+| colspan="2" | Sets the state of a single LED&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Bank
+|-
+| colspan="2" | 0 = Top Bank of LEDs, 1 = Bottom Bank of LEDs&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | LED
+|-
+| colspan="2" | 0 = LED0, 7 = LED7&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | State
+|-
+| colspan="2" | 0 = Off, 1 = On&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_PrintFloat'''
+|-
+| colspan="2" | Print a Float number rounded up to a specified amount of decimal places.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-f32-icon.png]] - FLOAT
+| width="90%" | Number
+|-
+| colspan="2" | Enter the number or variable to print to the LCD&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | DecimalPlaces
+|-
+| colspan="2" | Enter how many decimal places to round up to (1 - 6)&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IO_GetPort'''
+|-
+| colspan="2" | Reads the state of a single port&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Bank
+|-
+| colspan="2" | 0 = Top Bank of Switches, 1 = Bottom Bank of Switches&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_Cursor'''
+|-
+| colspan="2" | Moves the cursor on the LCD Display&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | x
+|-
+| colspan="2" | Set the cursor position in the X plane, 0 is the left most cell&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | y
+|-
+| colspan="2" | Set the cursor position in the Y plane, 0 is the top most cell&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Seg_ShowSegments'''
+|-
+| colspan="2" | Allows the individual segments of the display to be controlled. &nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Digit
+|-
+| colspan="2" | Which of the digits to change (0 - 3)&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Segments
+|-
+| colspan="2" | 8-bit Binary value to set the segments, bit0 = segA, bit1 = segB...&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_Start'''
+|-
+| colspan="2" | Startup routine required by the hardware device. Automatically clears the display after initialising.&nbsp;
+|-
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_Command'''
+|-
+| colspan="2" | Use this method/macro to send a specific command to the LCD. Refer to the Matrix Multimedia EB006 datasheet for a list of supported instructions. For Non-Matrix LCD's refer to the manufacturers datasheet.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | instruction
+|-
+| colspan="2" | Send a defined command to the LCD Screen. See datasheet for supported commands.&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_RAMWrite'''
+|-
+| colspan="2" | Modifies the internal memory of the LCD to allow for up to 8 customised characters to be created and stored in the device memory&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Index
+|-
+| colspan="2" | Values 0 to 7&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d0
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d1
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d2
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d3
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d4
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d5
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d6
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | d7
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IO_ReadAnalogAsInt'''
+|-
+| colspan="2" | Reads one of the analogue components as an Integer value&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | 0 = Light Sensor, 1 = Potentiometer&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-s16-icon.png]] - INT
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_PrintString'''
+|-
+| colspan="2" | Breaks down a string of text and sends it to the LCD via the private RawSend(byte, mask) macro&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
+| width="90%" | Text
+|-
+| colspan="2" | Enter the text or variable to print to the LCD&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_ClearLine'''
+|-
+| colspan="2" | Clears a single line on the display and then moves the cursor to the start of the line to allow you to start populating the line with data.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Line
+|-
+| colspan="2" | The line to clear, zero being the first (top) line of the display&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IO_GetSwitchState'''
+|-
+| colspan="2" | Reads the state of a single switch Returns: 0 = Switch not pressed, 1 = Switch pressed&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Bank
+|-
+| colspan="2" | 0 = Top Bank of Switches, 1 = Bottom Bank of Switches&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Switch
+|-
+| colspan="2" | 0 = SW0, 7 = SW7&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IO_ReadAnalogAsByte'''
+|-
+| colspan="2" | Reads one of the analogue components as an byte value&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | 0 = Light Sensor, 1 = Potentiometer&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_PrintAscii'''
+|-
+| colspan="2" | Takes the ascii value for a character and prints the character&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | character
+|-
+| colspan="2" | Holds an ascii value.&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_PrintNumber'''
+|-
+| colspan="2" | Based on v5 macro, will allow you to print a number. This is limited to a signed-INT, -32768 to 32767&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-s16-icon.png]] - INT
+| width="90%" | Number
+|-
+| colspan="2" | Enter the number or variable to print to the LCD&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_RawSend'''
+|-
+| colspan="2" | Sends data to the LCD display&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | data
+|-
+| colspan="2" | The data byte to send to the LCD&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-bool-icon.png]] - BOOL
+| width="90%" | type
+|-
+| colspan="2" | A boolean to indicate command type: true to write data, false to write a command&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''LCD_Clear'''
+|-
+| colspan="2" | Clears the entire contents of the display.&nbsp;
+|-
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+==Property reference==
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties'''
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
+| width="90%" | Connection Type
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Bank 0 Connections
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-19-icon.png]]
+| width="90%" | Bank 0
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Bank 1 Connections
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-19-icon.png]]
+| width="90%" | Bank 1
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Analog Connections
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-6-icon.png]]
+| width="90%" | Light Sensor
+|-
+| colspan="2" | Light Sensor ADC channel Connected to Bank 0 pin 0 which is usually analog pin AN0.&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-type-6-icon.png]]
+| width="90%" | Potentiometer
+|-
+| colspan="2" | Potentiometer ADC channel Connected to Bank 0 pin 1 which is usually analog pin AN1.&nbsp;
+|-
+| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
+| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Simulation
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
+| width="90%" | Analog Scope Traces
+|-
+| colspan="2" | Controls if traces are automatically added to the data recorder window for the analogue signals on the combo board.&nbsp;
+|}==Macro reference==
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"