Difference between revisions of "Component: SPI Slave (Comms: Interface)"

From Flowcode Help
Jump to navigationJump to search
 
(14 intermediate revisions by the same user not shown)
Line 15: Line 15:
 
Low level routines for controlling or interacting with an SPI interface. SPI or Serial Peripheral Interface is a bus used for board level communications between devices. A target microcontroller will usually have at least one hardware SPI peripheral built in.
 
Low level routines for controlling or interacting with an SPI interface. SPI or Serial Peripheral Interface is a bus used for board level communications between devices. A target microcontroller will usually have at least one hardware SPI peripheral built in.
  
−
==Detailed description==
+
==Component Source Code==
  
−
''No detailed description exists yet for this component''
+
Please click here to download the component source project: [https://www.flowcode.co.uk/wiki/componentsource/FC_Comp_Source_SPI_Slave.fcfx FC_Comp_Source_SPI_Slave.fcfx]
  
−
==Examples==
+
Please click here to view the component source code (Beta): [https://www.flowcode.co.uk/FlowchartView/?wfile=componentsource/FC_Comp_Source_SPI_Slave.fcfx FC_Comp_Source_SPI_Slave.fcfx]
  
 +
==Detailed description==
  
  
−
Simple Master program that sends an incrementing test value to the SPI bus as well as outputting the value onto LEDs.
 
  
−
{{Fcfile|SPI_Master.fcfx|SPI_Master}}
 
  
  
−
Simple Slave program that collects the value sent by the master and outputs the value onto LEDs. Allows the master slave comms to be compared to check that everything is working correctly.
 
  
−
{{Fcfile|SPI_Slave.fcfx|SPI_Slave}}
 
  
  
−
Another simple example to buffer incoming SPI bytes sent by the master and output these to the LCD.
 
  
−
{{Fcfile|SPI_Slave2.fcfx|SPI_Slave2}}
 
  
  
−
==Downloadable macro reference==
 
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SendChar'''
 
−
|-
 
−
| colspan="2" | General purpose SPI send byte macro 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Char
 
−
|-
 
−
| colspan="2" | Data byte to send 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetChar'''
 
−
|-
 
−
| colspan="2" | General purpose SPI get byte macro 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UnInitialise'''
 
−
|-
 
−
| colspan="2" | Deactivates the SPI peripheral leaving the I/O pins in a state where they can be used for general purpose I/O. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
 
−
|-
 
−
| colspan="2" | Activates the SPI peripheral and claims control over the I/O pins. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Disable_CS'''
 
−
|-
 
−
| colspan="2" | Outputs a high signal to the chip select pin to deselect the remote slave device. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetByteArray'''
 
−
|-
 
−
| colspan="2" | Attempts to read an array of bytes from the SPI bus. Similar to the GetString component macro but allows the value 0. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | NumBytes
 
−
|-
 
−
| colspan="2" | Number of bytes to read 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Data
 
−
|-
 
−
| colspan="2" | Byte Array to Assign Data to. 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
 +
''No detailed description exists yet for this component''
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+
==Examples==
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetChar'''
 
−
|-
 
−
| colspan="2" | General purpose SPI get byte macro 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UnInitialise'''
 
−
|-
 
−
| colspan="2" | Deactivates the SPI peripheral leaving the I/O pins in a state where they can be used for general purpose I/O. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Enable_CS'''
 
−
|-
 
−
| colspan="2" | Outputs a low signal to the chip select pin to select the remote slave device. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
 
−
|-
 
−
| colspan="2" | Activates the SPI peripheral and claims control over the I/O pins. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CStop'''
 
−
|-
 
−
| colspan="2" | Put the I2C Module into Stop mode 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIPrescaler'''
 
−
|-
 
−
| colspan="2" | Modify the speed of the SPI bus 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Prescaler
 
−
|-
 
−
| colspan="2" | Range: 0-2 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetDuty'''
 
−
|-
 
−
| colspan="2" | Sets the duty for the PWM output 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Range: 0-5 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Duty
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSample10'''
 
−
|-
 
−
| colspan="2" | Reads the voltage present on an Alanog pin as an 10-bit value range 0-1023 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | ADCChannel
 
−
|-
 
−
| colspan="2" | Range: 0-12 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransSend'''
 
−
|-
 
−
| colspan="2" | Sends an I2C Transaction on the selected I2C channel. Returns the number of bytes sent. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Data
 
−
|-
 
−
| colspan="2" | Data to send 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
 
−
| width="90%" | Count
 
−
|-
 
−
| colspan="2" | Number of bytes to send out, MS bit 0x8000 signifies no Stop if set 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CTransInit'''
 
−
|-
 
−
| colspan="2" | Initialises the I2C Transaction mode with the 7-bit device address 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | DeviceAddress
 
−
|-
 
−
| colspan="2" | 7-bit Device Address 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Baud
 
−
|-
 
−
| colspan="2" | 0=100KHz, 1=400KHz, 2=1MHz 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IOSetOutputPin'''
 
−
|-
 
−
| colspan="2" | Sets the selected digital pin to an output and assigns the output state. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Pin
 
−
|-
 
−
| colspan="2" | Range: 0-29 
 
−
|-
 
−
| width="10%" align="center" | [[File:]] -
 
−
| width="90%" | State
 
−
|-
 
−
| colspan="2" | Range: 0-1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTReceive'''
 
−
|-
 
−
| colspan="2" | Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIInitialise'''
 
−
|-
 
−
| colspan="2" | Initialsie the SPI module ready for communications 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
 +
Simple Master program that sends an incrementing test value to the SPI bus as well as outputting the value onto LEDs.
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+
{{Fcfile|SPI_Master.fcfx|SPI_Master}}
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CSend'''
 
−
|-
 
−
| colspan="2" | Transmit a byte using the I2C bus 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | DataOut
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+
Simple Slave program that collects the value sent by the master and outputs the value onto LEDs. Allows the master slave comms to be compared to check that everything is working correctly.
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTSend'''
 
−
|-
 
−
| colspan="2" | Send a byte via the UART module 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Data
 
−
|-
 
−
| colspan="2" | Data Byte to send. Range: 0-255 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
 +
{{Fcfile|SPI_Slave.fcfx|SPI_Slave}}
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetPrescaler'''
 
−
|-
 
−
| colspan="2" | Sets the prescaler for the PWM output 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Prescaler
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Period
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
 +
Another simple example to buffer incoming SPI bytes sent by the master and output these to the LCD.
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+
{{Fcfile|SPI_Slave2.fcfx|SPI_Slave2}}
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMEnable'''
 
−
|-
 
−
| colspan="2" | Enable a PWM output 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Range: 0-1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
 
−
|-
 
−
| colspan="2" | Initialise the comms to the Arduino board ready for commands to be sent. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
−
 
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''IOSetOutputPin'''
 
−
|-
 
−
| colspan="2" | Sets the selected digital pin to an output and assigns the output state. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Pin
 
−
|-
 
−
| colspan="2" | Range: 0-29 
 
−
|-
 
−
| width="10%" align="center" | [[File:]] -
 
−
| width="90%" | State
 
−
|-
 
−
| colspan="2" | Range: 0-1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTReceive'''
 
−
|-
 
−
| colspan="2" | Receives a data byte from the UART. Recommend calling the UARTCheckRx function first to ensure data is available. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage10'''
 
−
|-
 
−
| colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023. Performs the selected number of samples with the selected time in microseconds in between samples 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | ADCChannel
 
−
|-
 
−
| colspan="2" | Range: 0, 3-7 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | SampleCount
 
−
|-
 
−
| colspan="2" | Range: 1- 100 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | SampleDelay
 
−
|-
 
−
| colspan="2" | Delay in us between each sample 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireScanBus'''
 
−
|-
 
−
| colspan="2" | Scans the one wire bus to detect all connected devices. Returns the number of one wire devices found. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
  
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SPIInitialise'''
 
−
|-
 
−
| colspan="2" | Initialsie the SPI module ready for communications 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - SPI Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
  
 +
==Macro reference==
  
 +
===GetChar===
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
|-
 
|-
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireReceiveByte'''
+
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetChar'''
 
|-
 
|-
−
| colspan="2" | Receives a byte from the one wire bus a bit at a time 
+
| colspan="2" | General purpose SPI get byte macro 
 
|-
 
|-
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 
 
 
|-
 
|-
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
Line 610: Line 114:
  
  
 +
===Initialise===
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
|-
 
|-
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''I2CSend'''
+
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
 
|-
 
|-
−
| colspan="2" | Transmit a byte using the I2C bus 
+
| colspan="2" | Activates the SPI peripheral and claims control over the I/O pins. 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | DataOut
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:]] -
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
−
 
 
−
 
 
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UARTSend'''
 
−
|-
 
−
| colspan="2" | Send a byte via the UART module 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Channel Index: Range 0 - UART Bus Count - 1 
 
 
|-
 
|-
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Data
 
−
|-
 
−
| colspan="2" | Data Byte to send. Range: 0-255 
 
 
|-
 
|-
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
Line 656: Line 128:
  
  
 +
===SendChar===
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
|-
 
|-
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''OneWireGetDeviceCount'''
+
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SendChar'''
 
|-
 
|-
−
| colspan="2" | Returns the number of devices found by the last ScanBus operation. 
+
| colspan="2" | General purpose SPI send byte macro 
 
|-
 
|-
 
|-
 
|-
 
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
−
| width="90%" | Channel
+
| width="90%" | Char
 
|-
 
|-
−
| colspan="2" | Channel Index: Range 0 - I2C Bus Count - 1 
+
| colspan="2" | Data byte to send 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
−
 
 
−
 
 
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMSetPrescaler'''
 
−
|-
 
−
| colspan="2" | Sets the prescaler for the PWM output 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Range: 0 - 11 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Prescaler
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Period
 
−
|-
 
−
| colspan="2" |  
 
 
|-
 
|-
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
Line 702: Line 147:
  
  
 +
===UnInitialise===
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
|-
 
|-
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''PWMEnable'''
+
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''UnInitialise'''
 
|-
 
|-
−
| colspan="2" | Enable a PWM output 
+
| colspan="2" | Deactivates the SPI peripheral leaving the I/O pins in a state where they can be used for general purpose I/O. 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | Channel
 
−
|-
 
−
| colspan="2" | Range: 0-11 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
−
 
 
−
 
 
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleArray10'''
 
−
|-
 
−
| colspan="2" | Reads the voltage present on an Analog pin as an 10-bit value range 0-1023 Performs the selected number of samples with the selected time in microseconds in between samples and returns each sample in a single packet 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | ADCChannel
 
−
|-
 
−
| colspan="2" | Range: 0, 3-7 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | SampleCount
 
 
|-
 
|-
−
| colspan="2" | Range: 1- 32 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
 
−
| width="90%" | SampleDelay
 
−
|-
 
−
| colspan="2" | Delay in us between each sample 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
 
−
| width="90%" | Samples
 
−
|-
 
−
| colspan="2" | 10-bit samples returned from the function 
 
 
|-
 
|-
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
|}
 
|}
−
 
−
 
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''ADCSampleAverage8'''
 
−
|-
 
−
| colspan="2" | Reads the voltage present on an Analog pin as an 8-bit value range 0-255 Performs the selected number of samples with the selected time in microseconds in between samples 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | ADCChannel
 
−
|-
 
−
| colspan="2" | Range: 0, 3-7 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | SampleCount
 
−
|-
 
−
| colspan="2" | Range: 1- 100 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" | SampleDelay
 
−
|-
 
−
| colspan="2" | Delay in us between each sample 
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
−
 
−
 
−
{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
 
−
|-
 
−
| colspan="2" | Initialise the comms to the Arduino board ready for commands to be sent. 
 
−
|-
 
−
|-
 
−
| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 
−
| width="90%" style="border-top: 2px solid #000;" | ''Return''
 
−
|}
 
−
 
−
 
  
  
Line 804: Line 169:
 
|-
 
|-
 
|-
 
|-
−
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
+
| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
−
| width="90%" | Clock Phase
+
| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Connections
−
|-
 
−
| colspan="2" | Clock Phase (data change edge) selection 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
 
−
| width="90%" | Clock Polarity
 
−
|-
 
−
| colspan="2" | Clock Polarity setting, inactive (idle) state 
 
−
|-
 
−
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
 
−
| width="90%" | Sample Point
 
−
|-
 
−
| colspan="2" | Data bit read sample point 
 
−
|-
 
−
| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
 
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Connections'''
 
 
|-
 
|-
 
|-
 
|-
Line 853: Line 203:
 
| colspan="2" | Chip Select / Slave Select Pin  Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device.  
 
| colspan="2" | Chip Select / Slave Select Pin  Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device.  
 
|-
 
|-
−
| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-conn-icon.png]]
+
| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
−
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Simulations'''
+
| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Bus Settings
 +
|-
 +
|-
 +
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
 +
| width="90%" | Clock Phase
 +
|-
 +
| colspan="2" | Clock Phase (data change edge) selection 
 +
|-
 +
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
 +
| width="90%" | Clock Polarity
 +
|-
 +
| colspan="2" | Clock Polarity setting, inactive (idle) state 
 +
|-
 +
| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
 +
| width="90%" | Sample Point
 +
|-
 +
| colspan="2" | Data bit read sample point 
 +
|-
 +
| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
 +
| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Simulation
 
|-
 
|-
 
|-
 
|-

Latest revision as of 13:12, 7 February 2023

Author Matrix Ltd
Version 1.0
Category Comms: Interface


SPI Slave component

Low level routines for controlling or interacting with an SPI interface. SPI or Serial Peripheral Interface is a bus used for board level communications between devices. A target microcontroller will usually have at least one hardware SPI peripheral built in.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_SPI_Slave.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_SPI_Slave.fcfx

Detailed description

No detailed description exists yet for this component

Examples

Simple Master program that sends an incrementing test value to the SPI bus as well as outputting the value onto LEDs.

FC6 Icon.png SPI_Master


Simple Slave program that collects the value sent by the master and outputs the value onto LEDs. Allows the master slave comms to be compared to check that everything is working correctly.

FC6 Icon.png SPI_Slave


Another simple example to buffer incoming SPI bytes sent by the master and output these to the LCD.

FC6 Icon.png SPI_Slave2







Macro reference

GetChar

Fc9-comp-macro.png GetChar
General purpose SPI get byte macro 
Fc9-u8-icon.png - BYTE Return


Initialise

Fc9-comp-macro.png Initialise
Activates the SPI peripheral and claims control over the I/O pins. 
Fc9-void-icon.png - VOID Return


SendChar

Fc9-comp-macro.png SendChar
General purpose SPI send byte macro 
Fc9-u8-icon.png - BYTE Char
Data byte to send 
Fc9-void-icon.png - VOID Return


UnInitialise

Fc9-comp-macro.png UnInitialise
Deactivates the SPI peripheral leaving the I/O pins in a state where they can be used for general purpose I/O. 
Fc9-void-icon.png - VOID Return


Property reference

Fc9-prop-icon.png Properties
Fc9-conn-icon.png Connections
Fc9-type-16-icon.png Channel
SPI Channel selector 
Fc9-type-5-icon.png MOSI
SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode. 
Fc9-type-5-icon.png MISO
SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode. 
Fc9-type-5-icon.png CLK
SPI Clock Pin CLK - The Clock signal is driven by the SPI master. 
Fc9-type-7-icon.png Use Slave Select
 
Fc9-type-5-icon.png CS / SS
Chip Select / Slave Select Pin Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device.  
Fc9-conn-icon.png Bus Settings
Fc9-type-16-icon.png Clock Phase
Clock Phase (data change edge) selection 
Fc9-type-16-icon.png Clock Polarity
Clock Polarity setting, inactive (idle) state 
Fc9-type-16-icon.png Sample Point
Data bit read sample point 
Fc9-conn-icon.png Simulation
Fc9-type-10-icon.png Label
Label used to identify the component on the panel. 
Fc9-type-7-icon.png Scope Traces
Selects if the scope traces are automatically generated or not 
Fc9-type-7-icon.png Console Data
Selects if the console data is automatically generated or not 
Fc9-type-16-icon.png API
 
Retrieved from "https://www.flowcode.co.uk/wiki/index.php?title=Component:_SPI_Slave_(Comms:_Interface)&oldid=38309"