Component: Serial EEPROM (24C32) (EEPROM)

From Flowcode Help
Revision as of 12:03, 3 February 2023 by Wiki bot (talk | contribs)
Jump to navigationJump to search
Author Matrix TSL
Version 2.2
Category EEPROM


Serial EEPROM (24C32) component

Serial (I2C) EEPROM component for 24C32 Can be added to a MIAC project to give read and write access to the internal non-volatile memory device (if fitted, depending upon model).

Component Source Code

Please click here to download the component source project: FC_Comp_Source_temp/Serial_EEPROM_(24C32).fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_temp/Serial_EEPROM_(24C32).fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples




Macro reference

Read

Fc9-comp-macro.png Read
Read and return the value of the EEPROM at the given address 
Fc9-u16-icon.png - UINT address
 
Fc9-u8-icon.png - BYTE Return


Write

Fc9-comp-macro.png Write
Write the given data value to the EEPROM at the given address 
Fc9-u16-icon.png - UINT address
 
Fc9-u8-icon.png - BYTE data
 
Fc9-void-icon.png - VOID Return



Property reference

Fc9-prop-icon.png Properties
Fc9-conn-icon.png Connections
Fc9-type-16-icon.png Device Address
Device address bits, these must match the address pins on the EEPROM IC. 
Fc9-type-16-icon.png Channel
Channel selection 
Fc9-type-16-icon.png Baud Select
Baud rate option selector 
Fc9-type-14-icon.png Baud Rate
Baud rate to be used 
Fc9-type-7-icon.png Stop Delay
On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications.  
Fc9-type-5-icon.png SDA
Pin used for SDA (data signal) 
Fc9-type-5-icon.png SCL
Pin used for SCL (clock signal) 
Fc9-conn-icon.png Simulation
Fc9-type-7-icon.png Simulate Comms