Difference between revisions of "Component: TCP/IP (EB023 v2) (E-blocks 1)"

Latest revision as of 13:13, 7 February 2023

Author	Matrix TSL
Version	2.0
Category	E-blocks 1

TCP/IP component

TCP/IP component designed to work with the WIZ810MJ module from Wiznet, as used on version 2 EB023 E-block and the MIAC Industrial Addon module.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_TCPIP_EB023-00-2_EB.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_TCPIP_EB023-00-2_EB.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

CreateIPSocket

	CreateIPSocket
Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3. Note that sockets with different modes can be opened on different channels.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Protocol
Specifies which IP protocol to use
- BYTE	Broadcast
Allows broadcast type packets to be sent and received
- BYTE	Return

CreateMACSocket

	CreateMACSocket
This macro creates a socket for sending and receiving Ethernet data using raw data.
- BYTE	Promiscuous
Receive everything (1) or just data bound for your MAC (0)
- BYTE	Broadcast
Allows broadcast messages to be accepted (1) or rejected (0)
- BYTE	Error
Allowsmessages with errors to be accepted (1) or rejected (0)
- BYTE	Return

CreateTCPSocket

	CreateTCPSocket
This macro creates a socket for sending and receiving TCP data.
- BYTE	Channel
Specifies the communications channel 0-3
- UINT	Src_Port
Port Number
- BYTE	Return

CreateUDPSocket

	CreateUDPSocket
This macro creates a socket for sending and receiving UDP data.
- BYTE	Channel
Specifies the communications channel 0-3
- UINT	Src_Port
Port Number
- BYTE	Return

CreateUDPSocket_Sim

	CreateUDPSocket_Sim
This macro creates a socket for sending and receiving UDP data.
- BYTE	Channel
Specifies the communications channel 0-3
- UINT	Src_Port
Port Number
- BYTE	Return

GetSocketStatus

	GetSocketStatus
This returns the state of the requested channel's socket.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

Initialise

	Initialise
Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros
- BYTE	Return

MIAC_Module_GetData

	MIAC_Module_GetData

- BYTE	Index

- BYTE	Return

MIAC_Module_Message

	MIAC_Module_Message

- UINT	CAN_ID

- UINT	CMD_ID

- BYTE	Return

MIAC_Module_PushData

	MIAC_Module_PushData

- BYTE	Data

- VOID	Return

MIAC_Module_SetData

	MIAC_Module_SetData

- BYTE	Count

- BYTE	D0

- BYTE	D1

- BYTE	D2

- BYTE	D3

- BYTE	D4

- BYTE	D5

- VOID	Return

RxDataAvailable

	RxDataAvailable
This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received. A positive return value indicates that data is available.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxDataSize

	RxDataSize
This macro is used to detect the size of data collected by the Rx_data_available macro.
- BYTE	Channel
Specifies the communications channel 0-3
- UINT	Return

RxDataSize_Sim

	RxDataSize_Sim
This macro is used to detect the size of data collected by the Rx_data_available macro.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxFlushData

	RxFlushData
Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

RxFlushData_Sim

	RxFlushData_Sim
Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

RxMatchMyIP

	RxMatchMyIP
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxMatchMyMAC

	RxMatchMyMAC
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxMatchMyMAC_Sim

	RxMatchMyMAC_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxMatch_2_Bytes

	RxMatch_2_Bytes
This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 4 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Return

RxMatch_2_Bytes_Sim

	RxMatch_2_Bytes_Sim
This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 4 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Return

RxMatch_4_Bytes

	RxMatch_4_Bytes
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Byte3
Specifies the value of the third byte
- BYTE	Byte4
Specifies the value of the fourth byte
- BYTE	Return

RxMatch_4_Bytes_Sim

	RxMatch_4_Bytes_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Byte3
Specifies the value of the third byte
- BYTE	Byte4
Specifies the value of the fourth byte
- BYTE	Return

RxMatch_6_Bytes

	RxMatch_6_Bytes
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 4 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Byte3
Specifies the value of the third byte
- BYTE	Byte4
Specifies the value of the fourth byte
- BYTE	Byte5
Specifies the value of the fifth byte
- BYTE	Byte6
Specifies the value of the sixth byte
- BYTE	Return

RxReadByte

	RxReadByte
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxReadByte_Sim

	RxReadByte_Sim
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxReadHeader

	RxReadHeader
Once data in a particular channel has been received, the header will be filled with information about the received data. This macro will return the information in the header. The idx parameter specifies which byte of information in the header to read
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Idx
Specifies the byte index to return
- BYTE	Return

RxReadString

	RxReadString
A call to this macro will return a string of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Length

- STRING	Return

RxSkipBytes

	RxSkipBytes
Often when receiving data packets, it may be necessary to ignore large sections of the data. This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Count
Specifies how many bytes to skip
- VOID	Return

SetDestination

	SetDestination
This is used in IP and UDP modes to set the destination of the intended data transfer. The destination IP address needs to be set for both IP and UDP modes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Dst_IP0
Specifies the first byte of an IP address
- BYTE	Dst_IP1
Specifies the second byte of an IP address
- BYTE	Dst_IP2
Specifies the third byte of an IP address
- BYTE	Dst_IP3
Specifies the fourth byte of an IP address
- UINT	Dst_Port
Destination Port
- BYTE	Return

SetGateway

	SetGateway
This macro sets up the Internet E-Block's Gateway address. In most circumstances, this macro will not be required as the gateway address setting in the component property page will remain constant throughout your application.
- BYTE	IP0
First Byte of IP address
- BYTE	IP1
Second Byte of IP address
- BYTE	IP2
Third Byte of IP address
- BYTE	IP3
Fourth Byte of IP address
- VOID	Return

SetMACAddress

	SetMACAddress
This macro sets up the Internet E-Block's MAC address. In most circumstances, this macro will not be required as the MAC address setting in the component property page will remain constant throughout your application.
- BYTE	MAC0
First Byte of address
- BYTE	MAC1
Second Byte of address
- BYTE	MAC2
Third Byte of address
- BYTE	MAC3
Fourth Byte of address
- BYTE	MAC4
Fourth Byte of address
- BYTE	MAC5
Fifth Byte of address
- VOID	Return

SetMyIP

	SetMyIP
This macro sets up the Internet E-Block's own IP address. In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.
- BYTE	IP0
First Byte of IP address
- BYTE	IP1
Second Byte of IP address
- BYTE	IP2
Third Byte of IP address
- BYTE	IP3
Fourth Byte of IP address
- VOID	Return

SetSubnetMask

	SetSubnetMask
This macro sets up the Internet E-Block's Subnet Mask. In most circumstances, this macro will not be required as the subnet mask setting in the component property page will remain constant throughout your application.
- BYTE	IP0
First Byte of IP address
- BYTE	IP1
Second Byte of IP address
- BYTE	IP2
Third Byte of IP address
- BYTE	IP3
Fourth Byte of IP address
- VOID	Return

TCPClose

	TCPClose
When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TCPConnect

	TCPConnect
This macro puts a previously opened TCP channel in "active open" mode. This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Dst_IP0
First Byte of IP address
- BYTE	Dst_IP1
Second Byte of IP address
- BYTE	Dst_IP2
Third Byte of IP address
- BYTE	Dst_IP3
Fourth Byte of IP address
- UINT	Dst_Port
Destination Port
- BYTE	Return

TCPListen

	TCPListen
This macro puts a previously opened TCP channel in "passive open" mode. This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxEnd

	TxEnd
Once the transmit buffer has been filled with data, call this macro to actually send the data.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendByte

	TxSendByte
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a single byte of data, or with a string of information.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Data
Data byte to append to Tx buffer.
- VOID	Return

TxSendByte_Sim

	TxSendByte_Sim
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a single byte of data, or with a string of information.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Data
Data byte to append to Tx buffer.
- VOID	Return

TxSendMyIP

	TxSendMyIP
This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendMyMAC

	TxSendMyMAC
This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendString

	TxSendString
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a string of information.
- BYTE	Channel
Specifies the communications channel 0-3
- STRING	Data
Data byte to append to Tx buffer.
- BYTE	Length

- VOID	Return

TxStart

	TxStart
This macro indicates the start of data transmission for the specified buffer. In TCP mode, data transmission can only begin once the socket has become established. In other modes, data transmission can occur as soon as the socket has been opened.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

Property reference

	Properties
	Connections
	Channel
SPI Channel selector
	Prescale
Prescale option selector
	MOSI
SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.
	MISO
SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.
	CLK
SPI Clock Pin CLK - The Clock signal is driven by the SPI master.
	CS / SS
Chip Select / Slave Select Pin Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device.
	Gateway IP
	Gateway0

	Gateway1

	Gateway2

	Gateway3

	Subnet Mask
	Subnet0

	Subnet1

	Subnet2

	Subnet3

	IP Address
	IP0

	IP1

	IP2

	IP3

	MAC Address
	MAC0

	MAC1

	MAC2

	MAC3

	MAC4

	MAC5

	Simulation
	Label

	Sim Type
Decides how to perform the simulation of the component. TCP IP - Communicates using the Windows TCP IP communications DLL SPI / API - Communicates using the CAL SPI to allow the communications to be analysed and debugged.
	SPI Simulation
	Scope Traces
Selects if the scope traces are automatically generated or not
	Console Data
Selects if the console data is automatically generated or not
	API

@@ Line 22: / Line 22: @@
 ==Detailed description==
@@ Line 46: / Line 48: @@
 ==Examples==
@@ Line 68: / Line 72: @@
 ''<span style="color:red;">No additional examples</span>''
 ==Macro reference==
+===CreateIPSocket===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
+| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
 |-
 |-
@@ Line 84: / Line 99: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Protocol
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
 |-
+| colspan="2" | Specifies which IP protocol to use&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Broadcast
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 107: / Line 114: @@
+===CreateMACSocket===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Promiscuous
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
+| width="90%" | Broadcast
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
+| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
+| width="90%" | Error
 |-
-| colspan="2" | Specifies the value of the second byte&nbsp;
+| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 145: / Line 143: @@
+===CreateTCPSocket===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
 |-
-| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.&nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
+| width="90%" | Channel
 |-
-| colspan="2" | First Byte of IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | IP1
+| width="90%" | Src_Port
 |-
-| colspan="2" | Second Byte of IP address&nbsp;
+| colspan="2" | Port Number&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===CreateUDPSocket===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
 |-
 |-
@@ Line 191: / Line 181: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Data
+| width="90%" | Src_Port
 |-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
+| colspan="2" | Port Number&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===CreateUDPSocket_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
 |-
-| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read &nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
 |-
 |-
@@ Line 219: / Line 205: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Idx
+| width="90%" | Src_Port
 |-
-| colspan="2" | Specifies the byte index to return&nbsp;
+| colspan="2" | Port Number&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 229: / Line 215: @@
+===GetSocketStatus===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
 |-
-| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
+| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
 |-
 |-
@@ Line 242: / Line 229: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===Initialise===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
+|-
+| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
 |-
-| colspan="2" | Specifies how many bytes to skip&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===MIAC_Module_GetData===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_SetData'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_GetData'''
 |-
 | colspan="2" | &nbsp;
@@ Line 261: / Line 258: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
+| width="90%" | Index
 |-
 | colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D0
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===MIAC_Module_Message===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_Message'''
 |-
 | colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+|-
-| width="90%" | D1
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | CAN_ID
 |-
 | colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | D2
+| width="90%" | CMD_ID
 |-
 | colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D3
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===MIAC_Module_PushData===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_PushData'''
 |-
 | colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D4
-|-
-| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D5
+| width="90%" | Data
 |-
 | colspan="2" | &nbsp;
@@ Line 300: / Line 310: @@
+===MIAC_Module_SetData===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_SetData'''
 |-
-| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
+| colspan="2" | &nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Count
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Protocol
+| width="90%" | D0
 |-
-| colspan="2" | Specifies which IP protocol to use&nbsp;
+| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
+| width="90%" | D1
 |-
-| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
+| colspan="2" | &nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | D2
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | &nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
 |-
-| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | D3
 |-
+| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | D4
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
+| width="90%" | D5
 |-
-| colspan="2" | Specifies the first byte of an IP address&nbsp;
+| colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Dst_IP1
-|-
-| colspan="2" | Specifies the second byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
-|-
-| colspan="2" | Specifies the third byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
-|-
-| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Dst_Port
-|-
-| colspan="2" | Destination Port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxDataAvailable===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_GetData'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Index
+| width="90%" | Channel
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 389: / Line 378: @@
+===RxDataSize===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
 |-
-| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
+| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
 |-
 |-
@@ Line 402: / Line 392: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxDataSize_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_Message'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
 |-
 |-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | CAN_ID
+| width="90%" | Channel
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | CMD_ID
-|-
-| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 430: / Line 416: @@
+===RxFlushData===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
 |-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
+| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
 |-
 |-
@@ Line 443: / Line 430: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxFlushData_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
+| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
 |-
 |-
@@ Line 461: / Line 449: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxMatchMyIP===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
 |-
 |-
@@ Line 484: / Line 468: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxMatchMyMAC===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.&nbsp;
-| width="90%" | Byte2
 |-
-| colspan="2" | Specifies the value of the second byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
+| width="90%" | Channel
 |-
-| colspan="2" | Specifies the value of the third byte&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte5
-|-
-| colspan="2" | Specifies the value of the fifth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte6
-|-
-| colspan="2" | Specifies the value of the sixth byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 519: / Line 492: @@
+===RxMatchMyMAC_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
+|-
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxMatch_2_Bytes===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
 |-
 | colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
@@ Line 547: / Line 540: @@
+===RxMatch_2_Bytes_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
 |-
-| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
 |-
 |-
@@ Line 560: / Line 554: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte1
+|-
+| colspan="2" | Specifies the value of the first byte&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte2
+|-
+| colspan="2" | Specifies the value of the second byte&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxMatch_4_Bytes===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
 |-
-| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
 |-
 |-
@@ Line 579: / Line 584: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
+| width="90%" | Byte1
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Specifies the value of the first byte&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Byte2
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Specifies the value of the second byte&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte3
 |-
+| colspan="2" | Specifies the value of the third byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Byte4
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 611: / Line 608: @@
+===RxMatch_4_Bytes_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
 |-
-| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
 |-
 |-
@@ Line 624: / Line 622: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Byte1
-|}
+|-
+| colspan="2" | Specifies the value of the first byte&nbsp;
+|-
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte2
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Specifies the value of the second byte&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_PushData'''
 |-
-| colspan="2" | &nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte3
 |-
+| colspan="2" | Specifies the value of the third byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
+| width="90%" | Byte4
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Specifies the value of the fourth byte&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxMatch_6_Bytes===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
 |-
 |-
@@ Line 661: / Line 662: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
+| width="90%" | Byte1
+|-
+| colspan="2" | Specifies the value of the first byte&nbsp;
 |-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte2
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| colspan="2" | Specifies the value of the second byte&nbsp;
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte3
+|-
+| colspan="2" | Specifies the value of the third byte&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte4
+|-
+| colspan="2" | Specifies the value of the fourth byte&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte5
+|-
+| colspan="2" | Specifies the value of the fifth byte&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte6
+|-
+| colspan="2" | Specifies the value of the sixth byte&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxReadByte===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
 |-
-| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
+| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
 |-
 |-
@@ Line 683: / Line 710: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxReadByte_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
+| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
 |-
 |-
@@ Line 701: / Line 729: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxReadHeader===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
 |-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
+| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read &nbsp;
 |-
 |-
@@ Line 724: / Line 748: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Idx
+|-
+| colspan="2" | Specifies the byte index to return&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===RxReadString===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
 |-
-| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).&nbsp;
+| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
 |-
 |-
@@ Line 743: / Line 773: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
+| width="90%" | Length
 |-
-| colspan="2" | First Byte of IP address&nbsp;
+| colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | Dst_IP1
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxSkipBytes===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Second Byte of IP address&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
-| width="90%" | Dst_IP2
 |-
-| colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
+| width="90%" | Channel
 |-
-| colspan="2" | Fourth Byte of IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_Port
+| width="90%" | Count
 |-
-| colspan="2" | Destination Port&nbsp;
+| colspan="2" | Specifies how many bytes to skip&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===SetDestination===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
 |-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
+| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
 |-
 |-
@@ Line 785: / Line 820: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Dst_IP0
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Specifies the first byte of an IP address&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP1
 |-
+| colspan="2" | Specifies the second byte of an IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Dst_IP2
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Specifies the third byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP3
+|-
+| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | Dst_Port
+|-
+| colspan="2" | Destination Port&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 808: / Line 850: @@
+===SetGateway===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetGateway'''
+|-
+| colspan="2" | This macro sets up the Internet E-Block's Gateway address.  In most circumstances, this macro will not be required as the gateway address setting in the component property page will remain constant throughout your application.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | IP0
+|-
+| colspan="2" | First Byte of IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | IP1
+|-
+| colspan="2" | Second Byte of IP address&nbsp;
 |-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | IP2
 |-
+| colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | IP3
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Fourth Byte of IP address&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 826: / Line 884: @@
+===SetMACAddress===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMACAddress'''
 |-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
+| colspan="2" | This macro sets up the Internet E-Block's MAC address.  In most circumstances, this macro will not be required as the MAC address setting in the component property page will remain constant throughout your application.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | MAC0
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | First Byte of address&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | MAC1
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Second Byte of address&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | MAC2
 |-
+| colspan="2" | Third Byte of address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Promiscuous
+| width="90%" | MAC3
 |-
-| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
+| colspan="2" | Fourth Byte of address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
+| width="90%" | MAC4
 |-
-| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
+| colspan="2" | Fourth Byte of address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Error
+| width="90%" | MAC5
 |-
-| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
+| colspan="2" | Fifth Byte of address&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===SetMyIP===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
+| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | IP0
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | First Byte of IP address&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port
+| width="90%" | IP1
 |-
-| colspan="2" | Port Number&nbsp;
+| colspan="2" | Second Byte of IP address&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | IP2
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
 |-
+| colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | IP3
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Fourth Byte of IP address&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 913: / Line 962: @@
+===SetSubnetMask===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMACAddress'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetSubnetMask'''
 |-
-| colspan="2" | This macro sets up the Internet E-Block's MAC address.  In most circumstances, this macro will not be required as the MAC address setting in the component property page will remain constant throughout your application.&nbsp;
+| colspan="2" | This macro sets up the Internet E-Block's Subnet Mask.  In most circumstances, this macro will not be required as the subnet mask setting in the component property page will remain constant throughout your application.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC0
+| width="90%" | IP0
 |-
-| colspan="2" | First Byte of address&nbsp;
+| colspan="2" | First Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC1
+| width="90%" | IP1
 |-
-| colspan="2" | Second Byte of address&nbsp;
+| colspan="2" | Second Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC2
+| width="90%" | IP2
 |-
-| colspan="2" | Third Byte of address&nbsp;
+| colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC3
+| width="90%" | IP3
 |-
-| colspan="2" | Fourth Byte of address&nbsp;
+| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC4
-|-
-| colspan="2" | Fourth Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC5
-|-
-| colspan="2" | Fifth Byte of address&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 956: / Line 996: @@
+===TCPClose===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
+| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
 |-
 |-
@@ Line 969: / Line 1,010: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Byte1
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|-
+|}
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
+===TCPConnect===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect'''
 |-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
+| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).&nbsp;
 |-
 |-
@@ Line 1,007: / Line 1,029: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Dst_IP0
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | First Byte of IP address&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetSubnetMask'''
 |-
-| colspan="2" | This macro sets up the Internet E-Block's Subnet Mask.  In most circumstances, this macro will not be required as the subnet mask setting in the component property page will remain constant throughout your application.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-|-
+| width="90%" | Dst_IP1
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
 |-
 | colspan="2" | Second Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
+| width="90%" | Dst_IP2
 |-
 | colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
+| width="90%" | Dst_IP3
 |-
 | colspan="2" | Fourth Byte of IP address&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
+| width="90%" | Dst_Port
+|-
+| colspan="2" | Destination Port&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===TCPListen===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
+| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
 |-
 |-
@@ Line 1,058: / Line 1,073: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Byte1
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===TxEnd===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
+|-
+| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
+| width="90%" | Channel
 |-
-| colspan="2" | Specifies the value of the second byte&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===TxSendByte===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
 |-
 |-
@@ Line 1,086: / Line 1,111: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Data
+|-
+| colspan="2" | Data byte to append to Tx buffer.&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===TxSendByte_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
 |-
-| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
 |-
 |-
@@ Line 1,103: / Line 1,134: @@
 |-
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Data
+|-
+| colspan="2" | Data byte to append to Tx buffer.&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 1,109: / Line 1,145: @@
+===TxSendMyIP===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
 |-
-| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
 |-
 |-
@@ Line 1,122: / Line 1,159: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===TxSendMyMAC===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
+|-
+| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
+|-
 |-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
 |-
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
+===TxSendString===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetGateway'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
 |-
-| colspan="2" | This macro sets up the Internet E-Block's Gateway address.  In most circumstances, this macro will not be required as the gateway address setting in the component property page will remain constant throughout your application.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
+| width="90%" | Channel
 |-
-| colspan="2" | First Byte of IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | IP1
+| width="90%" | Data
 |-
-| colspan="2" | Second Byte of IP address&nbsp;
+| colspan="2" | Data byte to append to Tx buffer.&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
+| width="90%" | Length
 |-
-| colspan="2" | Third Byte of IP address&nbsp;
+| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 1,173: / Line 1,212: @@
+===TxStart===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-==Property reference==
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties'''
-|-
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Connections
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Channel
-|-
-| colspan="2" | SPI Channel selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Prescale
-|-
-| colspan="2" | Prescale option selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MOSI
-|-
-| colspan="2" | SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MISO
-|-
-| colspan="2" | SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CLK
-|-
-| colspan="2" | SPI Clock Pin CLK - The Clock signal is driven by the SPI master.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CS / SS
-|-
-| colspan="2" | Chip Select / Slave Select Pin  Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device. &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Gateway IP
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Subnet Mask
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | IP Address
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | MAC Address
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC4
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC5
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Simulation
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-10-icon.png]]
-| width="90%" | Label
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Sim Type
-|-
-| colspan="2" | Decides how to perform the simulation of the component. TCP IP - Communicates using the Windows TCP IP communications DLL SPI / API - Communicates using the CAL SPI to allow the communications to be analysed and debugged.&nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | SPI Simulation
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
-| width="90%" | Scope Traces
-|-
-| colspan="2" | Selects if the scope traces are automatically generated or not&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
-| width="90%" | Console Data
-|-
-| colspan="2" | Selects if the console data is automatically generated or not&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | API
-|-
-| colspan="2" | &nbsp;
-|}==Macro reference==
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
-|-
-| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Idx
-|-
-| colspan="2" | Specifies the byte index to return&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
-|-
-| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | Specifies how many bytes to skip&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_SetData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D4
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D5
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
-|-
-| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Protocol
-|-
-| colspan="2" | Specifies which IP protocol to use&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
-|-
-| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
-|-
-| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
-|-
-| colspan="2" | Specifies the first byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP1
-|-
-| colspan="2" | Specifies the second byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
-|-
-| colspan="2" | Specifies the third byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
-|-
-| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Dst_Port
-|-
-| colspan="2" | Destination Port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_GetData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Index
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
-|-
-| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_Message'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | CAN_ID
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | CMD_ID
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
-|-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte5
-|-
-| colspan="2" | Specifies the value of the fifth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte6
-|-
-| colspan="2" | Specifies the value of the sixth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
-|-
-| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
-|-
-| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
-|-
-| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_PushData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
-|-
-| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect'''
-|-
-| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Dst_Port
-|-
-| colspan="2" | Destination Port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
-|-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
-|-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Promiscuous
-|-
-| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
-|-
-| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Error
-|-
-| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMACAddress'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's MAC address.  In most circumstances, this macro will not be required as the MAC address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC0
-|-
-| colspan="2" | First Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC1
-|-
-| colspan="2" | Second Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC2
-|-
-| colspan="2" | Third Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC3
-|-
-| colspan="2" | Fourth Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC4
-|-
-| colspan="2" | Fourth Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC5
-|-
-| colspan="2" | Fifth Byte of address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
-|-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetSubnetMask'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's Subnet Mask.  In most circumstances, this macro will not be required as the subnet mask setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
-|-
-| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
-|-
-| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetGateway'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's Gateway address.  In most circumstances, this macro will not be required as the gateway address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-==Property reference==
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties'''
-|-
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Connections
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Channel
-|-
-| colspan="2" | SPI Channel selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Prescale
-|-
-| colspan="2" | Prescale option selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MOSI
-|-
-| colspan="2" | SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MISO
-|-
-| colspan="2" | SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CLK
-|-
-| colspan="2" | SPI Clock Pin CLK - The Clock signal is driven by the SPI master.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CS / SS
-|-
-| colspan="2" | Chip Select / Slave Select Pin  Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device. &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Gateway IP
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Subnet Mask
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | IP Address
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | MAC Address
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC4
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC5
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Simulation
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-10-icon.png]]
-| width="90%" | Label
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Sim Type
-|-
-| colspan="2" | Decides how to perform the simulation of the component. TCP IP - Communicates using the Windows TCP IP communications DLL SPI / API - Communicates using the CAL SPI to allow the communications to be analysed and debugged.&nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | SPI Simulation
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
-| width="90%" | Scope Traces
-|-
-| colspan="2" | Selects if the scope traces are automatically generated or not&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
-| width="90%" | Console Data
-|-
-| colspan="2" | Selects if the console data is automatically generated or not&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | API
-|-
-| colspan="2" | &nbsp;
-|}==Macro reference==
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
-|-
-| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Idx
-|-
-| colspan="2" | Specifies the byte index to return&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
-|-
-| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | Specifies how many bytes to skip&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_SetData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D4
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D5
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
-|-
-| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Protocol
-|-
-| colspan="2" | Specifies which IP protocol to use&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
-|-
-| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
-|-
-| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
-|-
-| colspan="2" | Specifies the first byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP1
-|-
-| colspan="2" | Specifies the second byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
-|-
-| colspan="2" | Specifies the third byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
-|-
-| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Dst_Port
-|-
-| colspan="2" | Destination Port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_GetData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Index
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
-|-
-| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_Message'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | CAN_ID
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | CMD_ID
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
-|-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte5
-|-
-| colspan="2" | Specifies the value of the fifth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte6
-|-
-| colspan="2" | Specifies the value of the sixth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
-|-
-| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
-|-
-| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
-|-
-| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_PushData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
-|-
-| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect'''
-|-
-| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Dst_Port
-|-
-| colspan="2" | Destination Port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
-|-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
-|-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Promiscuous
-|-
-| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
-|-
-| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Error
-|-
-| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMACAddress'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's MAC address.  In most circumstances, this macro will not be required as the MAC address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC0
-|-
-| colspan="2" | First Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC1
-|-
-| colspan="2" | Second Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC2
-|-
-| colspan="2" | Third Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC3
-|-
-| colspan="2" | Fourth Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC4
-|-
-| colspan="2" | Fourth Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC5
-|-
-| colspan="2" | Fifth Byte of address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
-|-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetSubnetMask'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's Subnet Mask.  In most circumstances, this macro will not be required as the subnet mask setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
-|-
-| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
-|-
-| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetGateway'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's Gateway address.  In most circumstances, this macro will not be required as the gateway address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-==Property reference==
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" | [[File:Fc9-prop-icon.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties'''
-|-
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Connections
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Channel
-|-
-| colspan="2" | SPI Channel selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Prescale
-|-
-| colspan="2" | Prescale option selector&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MOSI
-|-
-| colspan="2" | SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | MISO
-|-
-| colspan="2" | SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CLK
-|-
-| colspan="2" | SPI Clock Pin CLK - The Clock signal is driven by the SPI master.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-5-icon.png]]
-| width="90%" | CS / SS
-|-
-| colspan="2" | Chip Select / Slave Select Pin  Master Mode: General purpose output pin used to select the remote SPI device. Slave Mode: Hardware chip select pin input used to select the SPI device. &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Gateway IP
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Gateway3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Subnet Mask
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | Subnet3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | IP Address
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | IP3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | MAC Address
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC4
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-14-icon.png]]
-| width="90%" | MAC5
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | Simulation
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-10-icon.png]]
-| width="90%" | Label
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | Sim Type
-|-
-| colspan="2" | Decides how to perform the simulation of the component. TCP IP - Communicates using the Windows TCP IP communications DLL SPI / API - Communicates using the CAL SPI to allow the communications to be analysed and debugged.&nbsp;
-|-
-| width="10%" align="center" style="background-color:#EAE1EA;" | [[File:Fc9-conn-icon.png]]
-| width="90%" style="background-color:#EAE1EA; color:#4B008D;" | SPI Simulation
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
-| width="90%" | Scope Traces
-|-
-| colspan="2" | Selects if the scope traces are automatically generated or not&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-7-icon.png]]
-| width="90%" | Console Data
-|-
-| colspan="2" | Selects if the console data is automatically generated or not&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-type-16-icon.png]]
-| width="90%" | API
-|-
-| colspan="2" | &nbsp;
-|}==Macro reference==
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
-|-
-| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Idx
-|-
-| colspan="2" | Specifies the byte index to return&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
-|-
-| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | Specifies how many bytes to skip&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_SetData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D0
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D1
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D2
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D3
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D4
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | D5
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
-|-
-| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Protocol
-|-
-| colspan="2" | Specifies which IP protocol to use&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
-|-
-| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
-|-
-| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
-|-
-| colspan="2" | Specifies the first byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP1
-|-
-| colspan="2" | Specifies the second byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
-|-
-| colspan="2" | Specifies the third byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
-|-
-| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Dst_Port
-|-
-| colspan="2" | Destination Port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_GetData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Index
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
-|-
-| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_Message'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | CAN_ID
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | CMD_ID
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
-|-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte5
-|-
-| colspan="2" | Specifies the value of the fifth byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte6
-|-
-| colspan="2" | Specifies the value of the sixth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
-|-
-| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
-|-
-| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
-|-
-| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''MIAC_Module_PushData'''
-|-
-| colspan="2" | &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | &nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
-|-
-| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect'''
-|-
-| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Dst_Port
-|-
-| colspan="2" | Destination Port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
-|-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
-|-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Promiscuous
-|-
-| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
-|-
-| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Error
-|-
-| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
-|-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u16-icon.png]] - UINT
-| width="90%" | Src_Port
-|-
-| colspan="2" | Port Number&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
-|-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMACAddress'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's MAC address.  In most circumstances, this macro will not be required as the MAC address setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC0
-|-
-| colspan="2" | First Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC1
-|-
-| colspan="2" | Second Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC2
-|-
-| colspan="2" | Third Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC3
-|-
-| colspan="2" | Fourth Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC4
-|-
-| colspan="2" | Fourth Byte of address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | MAC5
-|-
-| colspan="2" | Fifth Byte of address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
-|-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetSubnetMask'''
-|-
-| colspan="2" | This macro sets up the Internet E-Block's Subnet Mask.  In most circumstances, this macro will not be required as the subnet mask setting in the component property page will remain constant throughout your application.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
-|-
-| colspan="2" | First Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
-|-
-| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
-|-
-| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetGateway'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
 |-
-| colspan="2" | This macro sets up the Internet E-Block's Gateway address.  In most circumstances, this macro will not be required as the gateway address setting in the component property page will remain constant throughout your application.&nbsp;
+| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
+| width="90%" | Channel
 |-
-| colspan="2" | First Byte of IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
-|-
-| colspan="2" | Second Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP2
-|-
-| colspan="2" | Third Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
-|-
-| colspan="2" | Fourth Byte of IP address&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}