Component: Barometer (MS5637) (Environmental)

From Flowcode Help
Revision as of 13:31, 17 November 2021 by Wiki bot (talk | contribs)
Jump to navigationJump to search
Author Matrix TSL
Version 1.0
Category Environmental


Barometer component

A small PCB surface mount barometric pressure sensor with a I2C bus interface. Pressure range 0 to 30 Bar. Temperature range -20 to +85 °C.

Detailed description

No detailed description exists yet for this component

Examples

No additional examples


Downloadable macro reference

Fc9-comp-macro.png ReadPressureFloat
Reads the pressure as a floating point value in Bars. Resultion sets the return bit value and conversion time. Calls the ReadPressureRaw function and then converts to a meaningful value. 
Fc9-u8-icon.png - BYTE Resolution
Range 0-5 
Fc9-f32-icon.png - FLOAT Return


Fc9-comp-macro.png Reset
Resets the device 
Fc9-void-icon.png - VOID Return


Fc9-comp-macro.png ReadTemperatureFloat
Reads the temperature as a floating point value in °C. Resultion sets the return bit value and conversion time. Calls the ReadTemperatureRaw function and then converts to a meaningful value. 
Fc9-u8-icon.png - BYTE Resolution
Range 0-5 
Fc9-f32-icon.png - FLOAT Return


Fc9-comp-macro.png ReadPressureRaw
Reads the pressure as a digital 32-bit value. Resultion sets the return bit value and conversion time. 0=0.11mBar / 1=0.062mBar / 2=0.039mBar 3=0.028mBar / 4=0.021mBar / 5=0.016mBar 
Fc9-u8-icon.png - BYTE Resolution
Range 0-5 
Fc9-u32-icon.png - ULONG Return


Fc9-comp-macro.png ReadTemperatureRaw
Reads the temperature as a digital 32-bit value. Resultion sets the return bit value and conversion time. 0=0.012°C / 1=0.009°C / 2=0.006°C 3=0.004°C / 4=0.003°C / 5=0.002°C 
Fc9-u8-icon.png - BYTE Resolution
Range 0-5 
[[File:]] - Return


Fc9-comp-macro.png ReadPROM
Reads a single 16-bit value from the PROM calibration data. 
Fc9-u8-icon.png - BYTE Address
Range 0-6 
Fc9-u16-icon.png - UINT Return


Fc9-comp-macro.png Initialise
Stes up the I2C bus and initialises the termperature sensor ready for use. 
Fc9-void-icon.png - VOID Return



Property reference

Fc9-prop-icon.png Properties
Fc9-type-16-icon.png Channel
Channel selection 
Fc9-type-5-icon.png SDA
Pin used for SDA (data signal) 
Fc9-type-5-icon.png SCL
Pin used for SCL (clock signal) 
Fc9-type-16-icon.png Baud Select
Baud rate option selector 
Fc9-type-14-icon.png Baud Rate
Baud rate to be used 
Fc9-type-7-icon.png Stop Delay
On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications.  
Fc9-type-7-icon.png Scope Traces
Selects if the component pin connections are automatically generated on the data recorder window or not. Yes: Automatically add the component pins to a group on the data recorder which will reflect the sim data during simultion. No: Do not show the pin signals on the data recorder window. 
Fc9-type-7-icon.png Console Data
Selects if the console data is automatically generated or not 
Fc9-type-16-icon.png Injector
Specifies the injector component on the panel to interact with to provide comms simulation. 
Fc9-conn-icon.png Connections
Fc9-conn-icon.png Simulations
Fc9-type-7-icon.png Simulate Comms
Allows the simulation data to come from the panel GUI or relayed via an injector component.