Component: Pedestrian Crossing (Scenarios)

Author	Matrix TSL
Version	1.0
Category	Scenarios

Pedestrian Crossing component

A set of pedestrian crossing lights complete with manual light control, a simple state machine and an automatic mode to allow the lights to take care of themselves.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_PedestrianCrossing_GDI.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_PedestrianCrossing_GDI.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

AutomaticMode

	AutomaticMode
Enables or Disables automatic mode where the lights will automatically cycle between modes.
- BOOL	Mode
0 = Auto Mode Disabled, 1 = Auto Mode Enabled
- VOID	Return

GetLightState

	GetLightState
Reads the state of one of the light sets. Returns the state as a number. 0=Red, 1=Red+Wait, 2=Green, 3=FlashingGreen, 4=Unknown State
- BYTE	Return

GetStopGo

	GetStopGo
Reads one of the light sets to determine if it is safe to go through the lights. Returns 1 for a Green light, otherwise returns 0.
- BOOL	Return

ReadSwitch

	ReadSwitch
Check to see if switch is currently pressed. Return: 0 = Not Pressed, 1 = Pressed
- BOOL	Return

SetLightState

	SetLightState
Follows the standard pedestrian crossing light sequence.
- BYTE	SequenceNumber
0 = Red, 1 = Red+Wait, 2 = Green, 3 = Green Flashing
- VOID	Return

SetLights

	SetLights
Direct control over all 3 of the lights.
- BOOL	Red
0 = Off, 1 = On
- BOOL	Green
0 = Off, 1 = On
- BOOL	Wait
0 = Off, 1 = On
- VOID	Return

Property reference

	Properties
	Colours
	Red Colour
Colour Picker to set the Colour of the Red indicator.
	Green Colour
Colour Picker to set the Colour of the Green indicator.
	Wait Colour
Colour Picker to set the Colour of the Wait indicator.
	Button Colour
Colour Picker to set the Colour of the push button.
	Off Colour
Colour Picker to set the Colour of all indicators when they are switched off.
	Timings - Automatic Mode
	Wait Time (ms)
Amount of time to wait in milliseconds the pedestrians have to wait before being allowed to cross.
	Crossing Time (ms)
Amount of time to wait in milliseconds for the pedestrians to cross the road.
	Flash Time (ms)
Amount of time to wait in milliseconds to warn pedestrians to finish crossing the road.
	Button Callback
	Button Pressed Macro
Calls a user macro when the button is pressed allowing for interrupt style callback functionality.