Difference between revisions of "Component: DAC (MCP4725) (MCP4725) (Analog Output)"
From Flowcode Help
Jump to navigationJump to search| Line 72: | Line 72: | ||
''<span style="color:red;">No additional examples</span>'' | ''<span style="color:red;">No additional examples</span>'' | ||
| + | |||
| + | |||
| Line 140: | Line 142: | ||
| width="90%" style="border-top: 2px solid #000;" | ''Return'' | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
|} | |} | ||
| − | |||
| − | |||
Revision as of 12:18, 3 February 2023
| Author | Matrix TSL |
| Version | 1.0 |
| Category | Analog Output |
Contents
DAC (MCP4725) component
Component to drive a 12-bit digital to analogue converter (DAC) IC from Microchip via an I2C interface.
Component Source Code
Please click here to download the component source project: FC_Comp_Source_temp/DAC_MCP4725.fcfx
Please click here to view the component source code (Beta): FC_Comp_Source_temp/DAC_MCP4725.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
Disable
|
Disable |
| Disables the DAC output. | |
 - VOID
|
Return |
Enable
|
|
Enable |
| Enables the DAC Output. | |
| - VOID
|
Return |
Initialise
|
|
Initialise |
| Configures the I2C peripheral ready for communications and initialises the internal variables. DAC needs to be enabled before any output voltage can be generated. | |
| - VOID
|
Return |
SetOutput
|
|
SetOutput |
| Sets the output voltage of the DAC 12-Bit: Range 0-4095 | |
 - UINT
|
DAC_Value |
| The value to output to the DAC | |
| - VOID
|
Return |
Property reference
|
Properties |
|
Disabled Pull Down |
| Sets the pull down resistance when the IC's DAC output is disabled. | |
|
Vref Voltage |
| Reference Voltage, Used to calculate the Voltage resolution. | |
|
Steps |
| Number of discrete output states available from the DAC. | |
|
Control Bits |
| Number of digital control bits | |
|
Resolution |
| Maximum output resolution based on number of control bits. | |
|
|
Voltage Resolution |
| Specifies the Resolution per digital bit in terms of Voltage. | |
|
I2C Connections |
|
|
User Address Bits |
| Specifies the bottom three "user" bits of the I2C 7-bit address | |
|
|
Channel |
| Channel selection | |
|
SDA |
| Pin used for SDA (data signal) | |
|
|
SCL |
| Pin used for SCL (clock signal) | |
|
Stop Delay |
| On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications. | |
|
|
Baud Select |
| Baud rate option selector | |
|
|
Baud Rate |
| Baud rate to be used | |
|
|
Simulation |
|
|
Simulate Comms |
