Component: Data Transfer (API I2C) ()
From Flowcode Help
Jump to navigationJump to search| Author | Matrix Ltd |
| Version | 1.2 |
| Category |
Contents
Data Transfer (API I2C) component
Comms data injector to allow a I2C bus peripheral to be attached to a comms component. The component will forward any byte transactions through to a SCADA Slave enabled hardware. Enabling the Flowcode simulation runtime to directly drive a physical I2C bus.
Component Source Code
Please click here to download the component source project: FC_Comp_Source_InjectorSCADAI2C.fcfx
Please click here to view the component source code (Beta): FC_Comp_Source_InjectorSCADAI2C.fcfx
Detailed description
No detailed description exists yet for this component
Examples
No additional examples
Macro reference
|
InitialiseInjector |
| Sets up the injector ready to receive commands or send data | |
 - STRING
|
InjectorName |
| Name of the console that will be created | |
 - BYTE
|
Return |
|
|
TxByte |
| Puts a byte onto the comms channel. | |
| - BYTE
|
DataByte |
 - VOID
|
Return |
|
|
RxByte |
| Attempt to receive a byte back from the injector 0 - 255 = Valid data 256 = RX timeout no data available | |
 - UINT
|
Return |
|
|
GetConsoleHandle |
| Gets the handle to the console allowing data displaying on the panel etc. | |
 - HANDLE
|
Return |
|
|
ChangeState |
| Sets the state of the bus. SPI - Controls the chip select pin I2C - Controls the start/restart/stop status | |
| - BYTE
|
State |
| SPI: 0=CSLow, 1=CSHigh I2C: 0=Stop, 1=Start, 2=Restart, 3=LastRx | |
| - VOID
|
Return |
Property reference
|
Properties |
|
SCADA Slave |
| SCADA Slave component to use to pipe data to a physical SPI bus | |
==Macro reference==
|
|
InitialiseInjector |
| Sets up the injector ready to receive commands or send data | |
| - STRING
|
InjectorName |
| Name of the console that will be created | |
| - BYTE
|
Return |
|
|
TxByte |
| Puts a byte onto the comms channel. | |
| - BYTE
|
DataByte |
| - VOID
|
Return |
|
|
RxByte |
| Attempt to receive a byte back from the injector 0 - 255 = Valid data 256 = RX timeout no data available | |
| - UINT
|
Return |
|
|
GetConsoleHandle |
| Gets the handle to the console allowing data displaying on the panel etc. | |
| - HANDLE
|
Return |
|
|
ChangeState |
| Sets the state of the bus. SPI - Controls the chip select pin I2C - Controls the start/restart/stop status | |
| - BYTE
|
State |
| SPI: 0=CSLow, 1=CSHigh I2C: 0=Stop, 1=Start, 2=Restart, 3=LastRx | |
| - VOID
|
Return |
Property reference
|
|
Properties |
|
|
SCADA Slave |
| SCADA Slave component to use to pipe data to a physical SPI bus | |
==Macro reference==
|
|
InitialiseInjector |
| Sets up the injector ready to receive commands or send data | |
| - STRING
|
InjectorName |
| Name of the console that will be created | |
| - BYTE
|
Return |
|
|
TxByte |
| Puts a byte onto the comms channel. | |
| - BYTE
|
DataByte |
| - VOID
|
Return |
|
|
RxByte |
| Attempt to receive a byte back from the injector 0 - 255 = Valid data 256 = RX timeout no data available | |
| - UINT
|
Return |
|
|
GetConsoleHandle |
| Gets the handle to the console allowing data displaying on the panel etc. | |
| - HANDLE
|
Return |
|
|
ChangeState |
| Sets the state of the bus. SPI - Controls the chip select pin I2C - Controls the start/restart/stop status | |
| - BYTE
|
State |
| SPI: 0=CSLow, 1=CSHigh I2C: 0=Stop, 1=Start, 2=Restart, 3=LastRx | |
| - VOID
|
Return |
Property reference
|
|
Properties |
|
|
SCADA Slave |
| SCADA Slave component to use to pipe data to a physical SPI bus | |
