Difference between revisions of "Component: TCP/IP (NM7010A) (Comms: Networking)"

Revision as of 12:03, 3 February 2023

Author	Matrix Ltd
Version	2.0
Category	Comms: Networking

TCP/IP (NM7010A) component

TCP/IP component designed to work with the WIZ3100 range of modules from Wiznet. Also available in the form of the version 1 EB023 E-block which uses the NM7010A module.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_temp/TCPIP_EB023-00-1.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_temp/TCPIP_EB023-00-1.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

CreateIPSocket

	CreateIPSocket
Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3. Note that sockets with different modes can be opened on different channels.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Protocol
Specifies which IP protocol to use
- BYTE	Broadcast
Allows broadcast type packets to be sent and received
- BYTE	Return

CreateIPSocket_Sim

	CreateIPSocket_Sim
Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3. Note that sockets with different modes can be opened on different channels.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Protocol
Specifies which IP protocol to use
- BYTE	Broadcast
Allows broadcast type packets to be sent and received
- BYTE	Return

CreateMACSocket

	CreateMACSocket
This macro creates a socket for sending and receiving Ethernet data using raw data.
- BYTE	Promiscuous
Receive everything (1) or just data bound for your MAC (0)
- BYTE	Broadcast
Allows broadcast messages to be accepted (1) or rejected (0)
- BYTE	Error
Allowsmessages with errors to be accepted (1) or rejected (0)
- BYTE	Return

CreateMACSocket_Sim

	CreateMACSocket_Sim
This macro creates a socket for sending and receiving Ethernet data using raw data.
- BYTE	Promiscuous
Receive everything (1) or just data bound for your MAC (0)
- BYTE	Broadcast
Allows broadcast messages to be accepted (1) or rejected (0)
- BYTE	Error
Allowsmessages with errors to be accepted (1) or rejected (0)
- BYTE	Return

CreateTCPSocket

	CreateTCPSocket
This macro creates a socket for sending and receiving TCP data.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Src_Port_Hi
Port High Byte
- BYTE	Src_Port_Lo
Port Low Byte
- BYTE	Return

CreateTCPSocket_Sim

	CreateTCPSocket_Sim
This macro creates a socket for sending and receiving TCP data.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Src_Port_Hi
Port High Byte
- BYTE	Src_Port_Lo
Port Low Byte
- BYTE	Return

CreateUDPSocket

	CreateUDPSocket
This macro creates a socket for sending and receiving UDP data.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Src_Port_Hi
Port High Byte
- BYTE	Src_Port_Lo
Port Low Byte
- BYTE	Return

CreateUDPSocket_Sim

	CreateUDPSocket_Sim
This macro creates a socket for sending and receiving UDP data.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Src_Port_Hi
Port High Byte
- BYTE	Src_Port_Lo
Port Low Byte
- BYTE	Return

GetSocketStatus

	GetSocketStatus
This returns the state of the requested channel's socket.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

GetSocketStatus_Sim

	GetSocketStatus_Sim
This returns the state of the requested channel's socket.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

Initialise

	Initialise
Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros
- VOID	Return

InitialiseSim

	InitialiseSim
Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros
- VOID	Return

RxDataAvailable

	RxDataAvailable
This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received. A positive return value indicates that data is available.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxDataAvailable_Sim

	RxDataAvailable_Sim
This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received. A positive return value indicates that data is available.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxDataSize

	RxDataSize
This macro is used to detect the size of data collected by the Rx_data_available macro.
- BYTE	Channel
Specifies the communications channel 0-3
- UINT	Return

RxDataSize_Sim

	RxDataSize_Sim
This macro is used to detect the size of data collected by the Rx_data_available macro.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxFlushData

	RxFlushData
Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

RxFlushData_Sim

	RxFlushData_Sim
Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

RxMatchMyIP

	RxMatchMyIP
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxMatchMyIP_Sim

	RxMatchMyIP_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxMatchMyMAC

	RxMatchMyMAC
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxMatchMyMAC_Sim

	RxMatchMyMAC_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxMatch_2_Bytes

	RxMatch_2_Bytes
This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 4 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Return

RxMatch_2_Bytes_Sim

	RxMatch_2_Bytes_Sim
This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 4 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Return

RxMatch_4_Bytes

	RxMatch_4_Bytes
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Byte3
Specifies the value of the third byte
- BYTE	Byte4
Specifies the value of the fourth byte
- BYTE	Return

RxMatch_4_Bytes_Sim

	RxMatch_4_Bytes_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 6 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Byte3
Specifies the value of the third byte
- BYTE	Byte4
Specifies the value of the fourth byte
- BYTE	Return

RxMatch_6_Bytes

	RxMatch_6_Bytes
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 4 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Byte3
Specifies the value of the third byte
- BYTE	Byte4
Specifies the value of the fourth byte
- BYTE	Byte5
Specifies the value of the fifth byte
- BYTE	Byte6
Specifies the value of the sixth byte
- BYTE	Return

RxMatch_6_Bytes_Sim

	RxMatch_6_Bytes_Sim
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 4 bytes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Byte1
Specifies the value of the first byte
- BYTE	Byte2
Specifies the value of the second byte
- BYTE	Byte3
Specifies the value of the third byte
- BYTE	Byte4
Specifies the value of the fourth byte
- BYTE	Byte5
Specifies the value of the fifth byte
- BYTE	Byte6
Specifies the value of the sixth byte
- BYTE	Return

RxReadByte

	RxReadByte
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxReadByte_Sim

	RxReadByte_Sim
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Return

RxReadHeader

	RxReadHeader
Once data in a particular channel has been received, the header will be filled with information about the received data. This macro will return the information in the header. The idx parameter specifies which byte of information in the header to read
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Idx
Specifies the byte index to return
- BYTE	Return

RxReadHeader_Sim

	RxReadHeader_Sim
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Idx

- BYTE	Return

RxReadString

	RxReadString
A call to this macro will return a string of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Length

- STRING	Return

RxReadString_Sim

	RxReadString_Sim
A call to this macro will return a string of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Length

- STRING	Return

RxSkipBytes

	RxSkipBytes
Often when receiving data packets, it may be necessary to ignore large sections of the data. This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Count
Specifies how many bytes to skip
- VOID	Return

RxSkipBytes_Sim

	RxSkipBytes_Sim
Often when receiving data packets, it may be necessary to ignore large sections of the data. This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Count
Specifies how many bytes to skip
- VOID	Return

SetDestination

	SetDestination
This is used in IP and UDP modes to set the destination of the intended data transfer. The destination IP address needs to be set for both IP and UDP modes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Dst_IP0
Specifies the first byte of an IP address
- BYTE	Dst_IP1
Specifies the second byte of an IP address
- BYTE	Dst_IP2
Specifies the third byte of an IP address
- BYTE	Dst_IP3
Specifies the fourth byte of an IP address
- BYTE	Dst_Port_Hi
Port High Byte
- BYTE	Dst_Port_Lo
Port Low Byte
- BYTE	Return

SetDestination_Sim

	SetDestination_Sim
This is used in IP and UDP modes to set the destination of the intended data transfer. The destination IP address needs to be set for both IP and UDP modes.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Dst_IP0
Specifies the first byte of an IP address
- BYTE	Dst_IP1
Specifies the second byte of an IP address
- BYTE	Dst_IP2
Specifies the third byte of an IP address
- BYTE	Dst_IP3
Specifies the fourth byte of an IP address
- BYTE	Dst_Port_Hi
Port High Byte
- BYTE	Dst_Port_Lo
Port Low Byte
- BYTE	Return

SetMyIP

	SetMyIP
This macro sets up the Internet E-Block's own IP address. In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.
- BYTE	IP0
First Byte of IP address
- BYTE	IP1
Second Byte of IP address
- BYTE	IP2
Third Byte of IP address
- BYTE	IP3
Fourth Byte of IP address
- VOID	Return

TCPClose

	TCPClose
When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TCPClose_Sim

	TCPClose_Sim
When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TCPConnect

	TCPConnect
This macro puts a previously opened TCP channel in "active open" mode. This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Dst_IP0
First Byte of IP address
- BYTE	Dst_IP1
Second Byte of IP address
- BYTE	Dst_IP2
Third Byte of IP address
- BYTE	Dst_IP3
Fourth Byte of IP address
- BYTE	Dst_Port_Hi
High Byte of destination port
- BYTE	Dst_Port_Lo
Low Byte of destination port
- BYTE	Return

TCPConnect_Sim

	TCPConnect_Sim
This macro puts a previously opened TCP channel in "active open" mode. This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Dst_IP0
First Byte of IP address
- BYTE	Dst_IP1
Second Byte of IP address
- BYTE	Dst_IP2
Third Byte of IP address
- BYTE	Dst_IP3
Fourth Byte of IP address
- BYTE	Dst_Port_Hi
High Byte of destination port
- BYTE	Dst_Port_Lo
Low Byte of destination port
- BYTE	Return

TCPListen

	TCPListen
This macro puts a previously opened TCP channel in "passive open" mode. This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TCPListen_Sim

	TCPListen_Sim
This macro puts a previously opened TCP channel in "passive open" mode. This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxEnd

	TxEnd
Once the transmit buffer has been filled with data, call this macro to actually send the data.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxEnd_Sim

	TxEnd_Sim
Once the transmit buffer has been filled with data, call this macro to actually send the data.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendByte

	TxSendByte
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a single byte of data, or with a string of information.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Data
Data byte to append to Tx buffer.
- VOID	Return

TxSendByte_Sim

	TxSendByte_Sim
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a single byte of data, or with a string of information.
- BYTE	Channel
Specifies the communications channel 0-3
- BYTE	Data
Data byte to append to Tx buffer.
- VOID	Return

TxSendMyIP

	TxSendMyIP
This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendMyIP_Sim

	TxSendMyIP_Sim
This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendMyMAC

	TxSendMyMAC
This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendMyMAC_Sim

	TxSendMyMAC_Sim
This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxSendString

	TxSendString
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a string of information.
- BYTE	Channel
Specifies the communications channel 0-3
- STRING	Data
Data byte to append to Tx buffer.
- BYTE	Length

- VOID	Return

TxSendString_Sim

	TxSendString_Sim
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a string of information.
- BYTE	Channel
Specifies the communications channel 0-3
- STRING	Data
Data byte to append to Tx buffer.
- BYTE	Length

- VOID	Return

TxStart

	TxStart
This macro indicates the start of data transmission for the specified buffer. In TCP mode, data transmission can only begin once the socket has become established. In other modes, data transmission can occur as soon as the socket has been opened.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

TxStart_Sim

	TxStart_Sim
This macro indicates the start of data transmission for the specified buffer. In TCP mode, data transmission can only begin once the socket has become established. In other modes, data transmission can occur as soon as the socket has been opened.
- BYTE	Channel
Specifies the communications channel 0-3
- VOID	Return

Property reference

	Properties
	Label

	Max Channels

	I2C Address

	Connections
	Channel
Channel selection
	Baud Select
Baud rate option selector
	Baud Rate
Baud rate to be used
	Stop Delay
On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications.
	SDA
Pin used for SDA (data signal)
	SCL
Pin used for SCL (clock signal)
	Int Pin

	Gateway IP
	Gateway0

	Gateway1

	Gateway2

	Gateway3

	Subnet Mask
	Subnet0

	Subnet1

	Subnet2

	Subnet3

	IP Address
	IP0

	IP1

	IP2

	IP3

	MAC Address
	MAC0

	MAC1

	MAC2

	MAC3

	MAC4

	MAC5

	Simulation
	Simulate I2C Comms

	TCP Simulation
	Network Interface
List of network interfaces connected to the PC. Sets which interface we are communicating via.
	Hostname
Local PC's hostname

@@ Line 17: / Line 17: @@
 ==Component Source Code==
-Please click here to download the component source project: [https://www.flowcode.co.uk/wiki/componentsource/FC_Comp_Source_TCPIP_EB023-00-1.fcfx FC_Comp_Source_TCPIP_EB023-00-1.fcfx]
+Please click here to download the component source project: [https://www.flowcode.co.uk/wiki/componentsource/FC_Comp_Source_temp/TCPIP_EB023-00-1.fcfx FC_Comp_Source_temp/TCPIP_EB023-00-1.fcfx]
-Please click here to view the component source code (Beta): [https://www.flowcode.co.uk/FlowchartView/?wfile=componentsource/FC_Comp_Source_TCPIP_EB023-00-1.fcfx FC_Comp_Source_TCPIP_EB023-00-1.fcfx]
+Please click here to view the component source code (Beta): [https://www.flowcode.co.uk/FlowchartView/?wfile=componentsource/FC_Comp_Source_temp/TCPIP_EB023-00-1.fcfx FC_Comp_Source_temp/TCPIP_EB023-00-1.fcfx]
 ==Detailed description==
@@ Line 53: / Line 53: @@
-==Macro reference==
-===InitialiseSim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''InitialiseSim'''
-|-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-|-
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
+==Macro reference==
-===TxSendMyIP===
+===CreateIPSocket===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
+| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
 |-
 |-
@@ Line 83: / Line 71: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Protocol
+|-
+| colspan="2" | Specifies which IP protocol to use&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Broadcast
+|-
+| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TxSendString_Sim===
+===CreateIPSocket_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket_Sim'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
+| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
 |-
 |-
@@ Line 102: / Line 100: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
+| width="90%" | Protocol
 |-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
+| colspan="2" | Specifies which IP protocol to use&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
+| width="90%" | Broadcast
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxReadHeader_Sim===
+===CreateMACSocket===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
+|-
+| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
+|-
 |-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Promiscuous
 |-
+| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Broadcast
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Idx
+| width="90%" | Error
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 141: / Line 144: @@
-===RxMatch_6_Bytes_Sim===
+===CreateMACSocket_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket_Sim'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Promiscuous
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
+| width="90%" | Broadcast
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
+| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
+| width="90%" | Error
+|-
+| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===CreateTCPSocket===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Specifies the value of the second byte&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
-| width="90%" | Byte3
 |-
-| colspan="2" | Specifies the value of the third byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
+| width="90%" | Channel
 |-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte5
+| width="90%" | Src_Port_Hi
 |-
-| colspan="2" | Specifies the value of the fifth byte&nbsp;
+| colspan="2" | Port High Byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte6
+| width="90%" | Src_Port_Lo
 |-
-| colspan="2" | Specifies the value of the sixth byte&nbsp;
+| colspan="2" | Port Low Byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 190: / Line 202: @@
-===RxMatchMyIP===
+===CreateTCPSocket_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket_Sim'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
 |-
 |-
@@ Line 204: / Line 216: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Src_Port_Hi
-|}
+|-
+| colspan="2" | Port High Byte&nbsp;
-===TxStart_Sim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart_Sim'''
-|-
-| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
-|-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Src_Port_Lo
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Port Low Byte&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TCPClose_Sim===
+===CreateUDPSocket===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
 |-
-| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
 |-
 |-
@@ Line 242: / Line 245: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Src_Port_Hi
-|}
+|-
+| colspan="2" | Port High Byte&nbsp;
-===RxDataAvailable_Sim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable_Sim'''
-|-
-| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
-|-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Src_Port_Lo
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Port Low Byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 266: / Line 260: @@
-===RxMatch_4_Bytes===
+===CreateUDPSocket_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
+| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
 |-
 |-
@@ Line 281: / Line 275: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
+| width="90%" | Src_Port_Hi
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
+| colspan="2" | Port High Byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
+| width="90%" | Src_Port_Lo
 |-
-| colspan="2" | Specifies the value of the second byte&nbsp;
+| colspan="2" | Port Low Byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 305: / Line 289: @@
-===SetMyIP===
+===GetSocketStatus===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
 |-
-| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.&nbsp;
+| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP0
+| width="90%" | Channel
 |-
-| colspan="2" | First Byte of IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP1
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===GetSocketStatus_Sim===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Second Byte of IP address&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus_Sim'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
-| width="90%" | IP2
 |-
-| colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | IP3
+| width="90%" | Channel
 |-
-| colspan="2" | Fourth Byte of IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TxSendString===
+===Initialise===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
+| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
 |-
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Channel
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===InitialiseSim===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''InitialiseSim'''
 |-
-| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
+| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
-| width="90%" | Data
 |-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
-|-
-| colspan="2" | &nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 368: / Line 355: @@
-===SetDestination_Sim===
+===RxDataAvailable===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
 |-
-| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
+| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
 |-
 |-
@@ Line 382: / Line 369: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxDataAvailable_Sim===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Specifies the first byte of an IP address&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable_Sim'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
-| width="90%" | Dst_IP1
 |-
-| colspan="2" | Specifies the second byte of an IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
+| width="90%" | Channel
 |-
-| colspan="2" | Specifies the third byte of an IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxDataSize===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
-| width="90%" | Dst_Port_Hi
 |-
-| colspan="2" | Port High Byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_Port_Lo
+| width="90%" | Channel
 |-
-| colspan="2" | Port Low Byte&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TxSendMyMAC_Sim===
+===RxDataSize_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
+| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
 |-
 |-
@@ Line 431: / Line 426: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxSkipBytes_Sim===
+===RxFlushData===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
 |-
-| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
+| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
 |-
 |-
@@ Line 449: / Line 444: @@
 |-
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | Specifies how many bytes to skip&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 460: / Line 450: @@
-===CreateIPSocket_Sim===
+===RxFlushData_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
 |-
-| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
+| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
 |-
 |-
@@ Line 474: / Line 464: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Protocol
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxMatchMyIP===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
+|-
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
 |-
-| colspan="2" | Specifies which IP protocol to use&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
+| width="90%" | Channel
 |-
-| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 489: / Line 488: @@
-===RxReadHeader===
+===RxMatchMyIP_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP_Sim'''
 |-
-| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read &nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
 |-
 |-
@@ Line 502: / Line 501: @@
 |-
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Idx
-|-
-| colspan="2" | Specifies the byte index to return&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 513: / Line 507: @@
-===TxSendMyIP_Sim===
+===RxMatchMyMAC===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.&nbsp;
 |-
 |-
@@ Line 527: / Line 521: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxSkipBytes===
+===RxMatchMyMAC_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
 |-
-| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
 |-
 |-
@@ Line 546: / Line 540: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Count
-|-
-| colspan="2" | Specifies how many bytes to skip&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===CreateIPSocket===
+===RxMatch_2_Bytes===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
 |-
-| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
 |-
 |-
@@ Line 571: / Line 560: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Protocol
+| width="90%" | Byte1
 |-
-| colspan="2" | Specifies which IP protocol to use&nbsp;
+| colspan="2" | Specifies the value of the first byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
+| width="90%" | Byte2
 |-
-| colspan="2" | Allows broadcast type packets to be sent and received&nbsp;
+| colspan="2" | Specifies the value of the second byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 585: / Line 574: @@
-===SetDestination===
+===RxMatch_2_Bytes_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
 |-
-| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
 |-
 |-
@@ Line 600: / Line 589: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
+| width="90%" | Byte1
 |-
-| colspan="2" | Specifies the first byte of an IP address&nbsp;
+| colspan="2" | Specifies the value of the first byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP1
+| width="90%" | Byte2
 |-
-| colspan="2" | Specifies the second byte of an IP address&nbsp;
+| colspan="2" | Specifies the value of the second byte&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP2
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxMatch_4_Bytes===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
+|-
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
 |-
-| colspan="2" | Specifies the third byte of an IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
+| width="90%" | Channel
 |-
-| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_Port_Hi
+| width="90%" | Byte1
 |-
-| colspan="2" | Port High Byte&nbsp;
+| colspan="2" | Specifies the value of the first byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_Port_Lo
+| width="90%" | Byte2
+|-
+| colspan="2" | Specifies the value of the second byte&nbsp;
 |-
-| colspan="2" | Port Low Byte&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte3
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | Specifies the value of the third byte&nbsp;
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|-
-|}
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte4
+|-
-===CreateTCPSocket_Sim===
+| colspan="2" | Specifies the value of the fourth byte&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxMatch_4_Bytes_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
 |-
 |-
@@ Line 649: / Line 657: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port_Hi
+| width="90%" | Byte1
 |-
-| colspan="2" | Port High Byte&nbsp;
+| colspan="2" | Specifies the value of the first byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port_Lo
+| width="90%" | Byte2
 |-
-| colspan="2" | Port Low Byte&nbsp;
+| colspan="2" | Specifies the value of the second byte&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Byte3
-|}
-===GetSocketStatus_Sim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus_Sim'''
-|-
-| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
 |-
+| colspan="2" | Specifies the value of the third byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Byte4
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Specifies the value of the fourth byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 682: / Line 681: @@
-===TxEnd_Sim===
+===RxMatch_6_Bytes===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
 |-
-| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
 |-
 |-
@@ Line 696: / Line 695: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Byte1
-|}
-===RxReadString_Sim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Specifies the value of the first byte&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString_Sim'''
 |-
-| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte2
 |-
+| colspan="2" | Specifies the value of the second byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Byte3
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Specifies the value of the third byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
+| width="90%" | Byte4
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Specifies the value of the fourth byte&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Byte5
-|}
-===RxMatchMyIP_Sim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP_Sim'''
-|-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
 |-
+| colspan="2" | Specifies the value of the fifth byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Byte6
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Specifies the value of the sixth byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 744: / Line 730: @@
-===TxStart===
+===RxMatch_6_Bytes_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes_Sim'''
 |-
-| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
+| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
 |-
 |-
@@ Line 758: / Line 744: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Byte1
-|}
-===CreateMACSocket_Sim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Specifies the value of the first byte&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket_Sim'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte2
 |-
+| colspan="2" | Specifies the value of the second byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Promiscuous
+| width="90%" | Byte3
 |-
-| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
+| colspan="2" | Specifies the value of the third byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Broadcast
+| width="90%" | Byte4
 |-
-| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
+| colspan="2" | Specifies the value of the fourth byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Error
+| width="90%" | Byte5
 |-
-| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
+| colspan="2" | Specifies the value of the fifth byte&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Byte6
+|-
+| colspan="2" | Specifies the value of the sixth byte&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TCPListen_Sim===
+===RxReadByte===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
 |-
-| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
+| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
 |-
 |-
@@ Line 806: / Line 793: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxReadByte===
+===RxReadByte_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
 |-
 | colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
@@ Line 830: / Line 817: @@
-===CreateUDPSocket===
+===RxReadHeader===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
+| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read &nbsp;
 |-
 |-
@@ Line 845: / Line 832: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port_Hi
+| width="90%" | Idx
 |-
-| colspan="2" | Port High Byte&nbsp;
+| colspan="2" | Specifies the byte index to return&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port_Lo
-|-
-| colspan="2" | Port Low Byte&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
@@ Line 859: / Line 841: @@
-===RxMatch_6_Bytes===
+===RxReadHeader_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader_Sim'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes.&nbsp;
+| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
 |-
 |-
@@ Line 874: / Line 856: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
+| width="90%" | Idx
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
+| colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxReadString===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Specifies the value of the second byte&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
-| width="90%" | Byte3
 |-
-| colspan="2" | Specifies the value of the third byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
+| width="90%" | Channel
 |-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte5
+| width="90%" | Length
 |-
-| colspan="2" | Specifies the value of the fifth byte&nbsp;
+| colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | Byte6
-|-
-| colspan="2" | Specifies the value of the sixth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TCPConnect_Sim===
+===RxReadString_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString_Sim'''
 |-
-| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).&nbsp;
+| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
 |-
 |-
@@ Line 923: / Line 904: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP0
+| width="90%" | Length
 |-
-| colspan="2" | First Byte of IP address&nbsp;
+| colspan="2" | &nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
-| width="90%" | Dst_IP1
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===RxSkipBytes===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| colspan="2" | Second Byte of IP address&nbsp;
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
-| width="90%" | Dst_IP2
 |-
-| colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_IP3
+| width="90%" | Channel
 |-
-| colspan="2" | Fourth Byte of IP address&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Dst_Port_Hi
+| width="90%" | Count
 |-
-| colspan="2" | High Byte of destination port&nbsp;
+| colspan="2" | Specifies how many bytes to skip&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Dst_Port_Lo
-|-
-| colspan="2" | Low Byte of destination port&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxMatch_2_Bytes===
+===RxSkipBytes_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes_Sim'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
+| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro.&nbsp;
 |-
 |-
@@ Line 972: / Line 952: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
+| width="90%" | Count
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
+| colspan="2" | Specifies how many bytes to skip&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Byte2
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|-
+|}
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-===TxEnd===
+===SetDestination===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
 |-
-| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
+| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
 |-
 |-
@@ Line 1,000: / Line 975: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Dst_IP0
-|}
-===RxReadString===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Specifies the first byte of an IP address&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
 |-
-| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP1
 |-
+| colspan="2" | Specifies the second byte of an IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Dst_IP2
+|-
+| colspan="2" | Specifies the third byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP3
+|-
+| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_Port_Hi
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Port High Byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Length
+| width="90%" | Dst_Port_Lo
 |-
-| colspan="2" | &nbsp;
+| colspan="2" | Port Low Byte&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-string-icon.png]] - STRING
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===CreateTCPSocket===
+===SetDestination_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination_Sim'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving TCP data.&nbsp;
+| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes.&nbsp;
 |-
 |-
@@ Line 1,044: / Line 1,025: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port_Hi
+| width="90%" | Dst_IP0
+|-
+| colspan="2" | Specifies the first byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP1
+|-
+| colspan="2" | Specifies the second byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP2
+|-
+| colspan="2" | Specifies the third byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP3
+|-
+| colspan="2" | Specifies the fourth byte of an IP address&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_Port_Hi
 |-
 | colspan="2" | Port High Byte&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port_Lo
+| width="90%" | Dst_Port_Lo
 |-
 | colspan="2" | Port Low Byte&nbsp;
@@ Line 1,058: / Line 1,059: @@
-===RxDataAvailable===
+===SetMyIP===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
 |-
-| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available.&nbsp;
+| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application.&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | IP0
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | First Byte of IP address&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | IP1
-|}
-===TxSendByte===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | Second Byte of IP address&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | IP2
 |-
+| colspan="2" | Third Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | IP3
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Fourth Byte of IP address&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 1,101: / Line 1,093: @@
-===TCPListen===
+===TCPClose===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
 |-
-| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
+| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
 |-
 |-
@@ Line 1,120: / Line 1,112: @@
-===TxSendByte_Sim===
+===TCPClose_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose_Sim'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
+| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
 |-
 |-
@@ Line 1,133: / Line 1,125: @@
 |-
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Data
-|-
-| colspan="2" | Data byte to append to Tx buffer.&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
@@ Line 1,144: / Line 1,131: @@
-===RxFlushData===
+===TCPConnect===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
-|-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
-|-
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
-|-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-===TCPConnect===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
@@ Line 1,212: / Line 1,180: @@
-===RxReadByte_Sim===
+===TCPConnect_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect_Sim'''
 |-
-| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte &nbsp;
+| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email).&nbsp;
 |-
 |-
@@ Line 1,226: / Line 1,194: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
+| width="90%" | Dst_IP0
-|}
-===RxMatchMyMAC===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| colspan="2" | First Byte of IP address&nbsp;
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page.&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP1
 |-
+| colspan="2" | Second Byte of IP address&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Dst_IP2
+|-
+| colspan="2" | Third Byte of IP address&nbsp;
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Dst_IP3
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| colspan="2" | Fourth Byte of IP address&nbsp;
-| width="90%" style="border-top: 2px solid #000;" | ''Return''
-|}
-===RxFlushData_Sim===
-{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
-| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
+| width="90%" | Dst_Port_Hi
-|-
-| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read.&nbsp;
 |-
+| colspan="2" | High Byte of destination port&nbsp;
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Channel
+| width="90%" | Dst_Port_Lo
 |-
-| colspan="2" | Specifies the communications channel 0-3&nbsp;
+| colspan="2" | Low Byte of destination port&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxDataSize===
+===TCPListen===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
 |-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
+| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
 |-
 |-
@@ Line 1,283: / Line 1,243: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u16-icon.png]] - UINT
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===CreateMACSocket===
+===TCPListen_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen_Sim'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data.&nbsp;
+| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages).&nbsp;
 |-
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Promiscuous
+| width="90%" | Channel
 |-
-| colspan="2" | Receive everything (1) or just data bound for your MAC (0)&nbsp;
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Broadcast
-|-
-| colspan="2" | Allows broadcast messages to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Error
-|-
-| colspan="2" | Allowsmessages with errors to be accepted (1) or rejected (0)&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===CreateUDPSocket_Sim===
+===TxEnd===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
 |-
-| colspan="2" | This macro creates a socket for sending and receiving UDP data.&nbsp;
+| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
 |-
 |-
@@ Line 1,331: / Line 1,281: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Src_Port_Hi
-|-
-| colspan="2" | Port High Byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Src_Port_Lo
-|-
-| colspan="2" | Port Low Byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TxSendMyMAC===
+===TxEnd_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd_Sim'''
 |-
-| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
+| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data.&nbsp;
 |-
 |-
@@ Line 1,365: / Line 1,305: @@
-===RxMatch_4_Bytes_Sim===
+===TxSendByte===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
 |-
 |-
@@ Line 1,380: / Line 1,320: @@
 |-
 | width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte1
+| width="90%" | Data
 |-
-| colspan="2" | Specifies the value of the first byte&nbsp;
+| colspan="2" | Data byte to append to Tx buffer.&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte3
-|-
-| colspan="2" | Specifies the value of the third byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte4
-|-
-| colspan="2" | Specifies the value of the fourth byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxDataSize_Sim===
+===TxSendByte_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
 |-
-| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information.&nbsp;
 |-
 |-
@@ Line 1,418: / Line 1,343: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Data
+|-
+| colspan="2" | Data byte to append to Tx buffer.&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxMatch_2_Bytes_Sim===
+===TxSendMyIP===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
 |-
 |-
@@ Line 1,437: / Line 1,367: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
-| width="90%" | Byte1
-|-
-| colspan="2" | Specifies the value of the first byte&nbsp;
-|-
-| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
-| width="90%" | Byte2
-|-
-| colspan="2" | Specifies the value of the second byte&nbsp;
-|-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===RxMatchMyMAC_Sim===
+===TxSendMyIP_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP_Sim'''
 |-
-| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page.&nbsp;
 |-
 |-
@@ Line 1,466: / Line 1,386: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===TCPClose===
+===TxSendMyMAC===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
 |-
-| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
 |-
 |-
@@ Line 1,490: / Line 1,410: @@
-===GetSocketStatus===
+===TxSendMyMAC_Sim===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC_Sim'''
 |-
-| colspan="2" | This returns the state of the requested channel's socket.&nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page.&nbsp;
 |-
 |-
@@ Line 1,504: / Line 1,424: @@
 | colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
-| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
 | width="90%" style="border-top: 2px solid #000;" | ''Return''
 |}
-===Initialise===
+===TxSendString===
 {| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
 | width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
-| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
 |-
-| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros &nbsp;
+| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
+| width="90%" | Data
+|-
+| colspan="2" | Data byte to append to Tx buffer.&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Length
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===TxSendString_Sim===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
 |-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString_Sim'''
+|-
+| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-string-icon.png]] - STRING
+| width="90%" | Data
+|-
+| colspan="2" | Data byte to append to Tx buffer.&nbsp;
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Length
+|-
+| colspan="2" | &nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===TxStart===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
+|-
+| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
+|-
+| width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID
+| width="90%" style="border-top: 2px solid #000;" | ''Return''
+|}
+===TxStart_Sim===
+{| class="wikitable" style="width:60%; background-color:#FFFFFF;"
+|-
+| width="10%" align="center" style="background-color:#D8C9D8;" align="center" | [[File:Fc9-comp-macro.png]]
+| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart_Sim'''
+|-
+| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened.&nbsp;
+|-
+|-
+| width="10%" align="center" | [[File:Fc9-u8-icon.png]] - BYTE
+| width="90%" | Channel
+|-
+| colspan="2" | Specifies the communications channel 0-3&nbsp;
 |-
 | width="10%" align="center" style="border-top: 2px solid #000;" | [[File:Fc9-void-icon.png]] - VOID