Jump to content

Component: TCP/IP DUMMY (NM7010A) (Comms: Networking): Difference between revisions

From Flowcode Help
← Older edit

SteveT (talk | contribs)

4 user groups
6,424 edits
m Text replacement - "width="10%" align="center" style="background-color:#D8C9D8;"" to "width="10%" align="center" class="mtx-class-macrohead""
m Text replacement - "width="90%" style="background-color:#D8C9D8; color:#4B008D;"" to "width="90%" class="mtx-class-macrohead""
 
Line 95: Line 95:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket'''
| width="90%" class="mtx-class-macrohead" | '''CreateIPSocket'''
|-
|-
| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels. 
| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels. 
Line 124: Line 124:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateIPSocket_Sim'''
| width="90%" class="mtx-class-macrohead" | '''CreateIPSocket_Sim'''
|-
|-
| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels. 
| colspan="2" | Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3.  Note that sockets with different modes can be opened on different channels. 
Line 153: Line 153:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket'''
| width="90%" class="mtx-class-macrohead" | '''CreateMACSocket'''
|-
|-
| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data. 
| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data. 
Line 182: Line 182:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateMACSocket_Sim'''
| width="90%" class="mtx-class-macrohead" | '''CreateMACSocket_Sim'''
|-
|-
| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data. 
| colspan="2" | This macro creates a socket for sending and receiving Ethernet data using raw data. 
Line 211: Line 211:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket'''
| width="90%" class="mtx-class-macrohead" | '''CreateTCPSocket'''
|-
|-
| colspan="2" | This macro creates a socket for sending and receiving TCP data. 
| colspan="2" | This macro creates a socket for sending and receiving TCP data. 
Line 240: Line 240:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateTCPSocket_Sim'''
| width="90%" class="mtx-class-macrohead" | '''CreateTCPSocket_Sim'''
|-
|-
| colspan="2" | This macro creates a socket for sending and receiving TCP data. 
| colspan="2" | This macro creates a socket for sending and receiving TCP data. 
Line 269: Line 269:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket'''
| width="90%" class="mtx-class-macrohead" | '''CreateUDPSocket'''
|-
|-
| colspan="2" | This macro creates a socket for sending and receiving UDP data. 
| colspan="2" | This macro creates a socket for sending and receiving UDP data. 
Line 298: Line 298:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''CreateUDPSocket_Sim'''
| width="90%" class="mtx-class-macrohead" | '''CreateUDPSocket_Sim'''
|-
|-
| colspan="2" | This macro creates a socket for sending and receiving UDP data. 
| colspan="2" | This macro creates a socket for sending and receiving UDP data. 
Line 327: Line 327:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus'''
| width="90%" class="mtx-class-macrohead" | '''GetSocketStatus'''
|-
|-
| colspan="2" | This returns the state of the requested channel's socket. 
| colspan="2" | This returns the state of the requested channel's socket. 
Line 346: Line 346:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''GetSocketStatus_Sim'''
| width="90%" class="mtx-class-macrohead" | '''GetSocketStatus_Sim'''
|-
|-
| colspan="2" | This returns the state of the requested channel's socket. 
| colspan="2" | This returns the state of the requested channel's socket. 
Line 365: Line 365:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Initialise'''
| width="90%" class="mtx-class-macrohead" | '''Initialise'''
|-
|-
| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros  
| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros  
Line 379: Line 379:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''InitialiseSim'''
| width="90%" class="mtx-class-macrohead" | '''InitialiseSim'''
|-
|-
| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros  
| colspan="2" | Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros  
Line 393: Line 393:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable'''
| width="90%" class="mtx-class-macrohead" | '''RxDataAvailable'''
|-
|-
| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available. 
| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available. 
Line 412: Line 412:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataAvailable_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxDataAvailable_Sim'''
|-
|-
| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available. 
| colspan="2" | This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received.  A positive return value indicates that data is available. 
Line 431: Line 431:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize'''
| width="90%" class="mtx-class-macrohead" | '''RxDataSize'''
|-
|-
| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro. 
| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro. 
Line 450: Line 450:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxDataSize_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxDataSize_Sim'''
|-
|-
| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro. 
| colspan="2" | This macro is used to detect the size of data collected by the Rx_data_available macro. 
Line 469: Line 469:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData'''
| width="90%" class="mtx-class-macrohead" | '''RxFlushData'''
|-
|-
| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read. 
| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read. 
Line 488: Line 488:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxFlushData_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxFlushData_Sim'''
|-
|-
| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read. 
| colspan="2" | Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read. 
Line 507: Line 507:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP'''
| width="90%" class="mtx-class-macrohead" | '''RxMatchMyIP'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
Line 526: Line 526:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyIP_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxMatchMyIP_Sim'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
Line 545: Line 545:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC'''
| width="90%" class="mtx-class-macrohead" | '''RxMatchMyMAC'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page. 
| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page. 
Line 564: Line 564:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatchMyMAC_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxMatchMyMAC_Sim'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
Line 583: Line 583:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes'''
| width="90%" class="mtx-class-macrohead" | '''RxMatch_2_Bytes'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes. 
| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes. 
Line 612: Line 612:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_2_Bytes_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxMatch_2_Bytes_Sim'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes. 
| colspan="2" | This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 4 bytes and 6 bytes. 
Line 641: Line 641:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes'''
| width="90%" class="mtx-class-macrohead" | '''RxMatch_4_Bytes'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes. 
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes. 
Line 680: Line 680:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_4_Bytes_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxMatch_4_Bytes_Sim'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes. 
| colspan="2" | This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 6 bytes. 
Line 719: Line 719:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes'''
| width="90%" class="mtx-class-macrohead" | '''RxMatch_6_Bytes'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes. 
| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes. 
Line 768: Line 768:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxMatch_6_Bytes_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxMatch_6_Bytes_Sim'''
|-
|-
| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes. 
| colspan="2" | This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters.  There are similar functions that check for 2 bytes and 4 bytes. 
Line 817: Line 817:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte'''
| width="90%" class="mtx-class-macrohead" | '''RxReadByte'''
|-
|-
| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
Line 836: Line 836:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadByte_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxReadByte_Sim'''
|-
|-
| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
Line 855: Line 855:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader'''
| width="90%" class="mtx-class-macrohead" | '''RxReadHeader'''
|-
|-
| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read  
| colspan="2" | Once data in a particular channel has been received, the header will be filled with information about the received data.  This macro will return the information in the header.  The idx parameter specifies which byte of information in the header to read  
Line 879: Line 879:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadHeader_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxReadHeader_Sim'''
|-
|-
| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
| colspan="2" | A call to this macro will return a byte of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
Line 903: Line 903:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString'''
| width="90%" class="mtx-class-macrohead" | '''RxReadString'''
|-
|-
| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
Line 927: Line 927:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxReadString_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxReadString_Sim'''
|-
|-
| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
| colspan="2" | A call to this macro will return a string of data in the reception buffer of the specified channel.  It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
Line 951: Line 951:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes'''
| width="90%" class="mtx-class-macrohead" | '''RxSkipBytes'''
|-
|-
| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro. 
| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro. 
Line 975: Line 975:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''RxSkipBytes_Sim'''
| width="90%" class="mtx-class-macrohead" | '''RxSkipBytes_Sim'''
|-
|-
| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro. 
| colspan="2" | Often when receiving data packets, it may be necessary to ignore large sections of the data.  This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro. 
Line 999: Line 999:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination'''
| width="90%" class="mtx-class-macrohead" | '''SetDestination'''
|-
|-
| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes. 
| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes. 
Line 1,048: Line 1,048:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetDestination_Sim'''
| width="90%" class="mtx-class-macrohead" | '''SetDestination_Sim'''
|-
|-
| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes. 
| colspan="2" | This is used in IP and UDP modes to set the destination of the intended data transfer.  The destination IP address needs to be set for both IP and UDP modes. 
Line 1,097: Line 1,097:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''SetMyIP'''
| width="90%" class="mtx-class-macrohead" | '''SetMyIP'''
|-
|-
| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application. 
| colspan="2" | This macro sets up the Internet E-Block's own IP address.  In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application. 
Line 1,131: Line 1,131:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose'''
| width="90%" class="mtx-class-macrohead" | '''TCPClose'''
|-
|-
| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket. 
| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket. 
Line 1,150: Line 1,150:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPClose_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TCPClose_Sim'''
|-
|-
| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket. 
| colspan="2" | When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket. 
Line 1,169: Line 1,169:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect'''
| width="90%" class="mtx-class-macrohead" | '''TCPConnect'''
|-
|-
| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email). 
| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email). 
Line 1,218: Line 1,218:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPConnect_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TCPConnect_Sim'''
|-
|-
| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email). 
| colspan="2" | This macro puts a previously opened TCP channel in "active open" mode.  This is the required mode when writing a TCP client application (e.g. using SMTP to send an email). 
Line 1,267: Line 1,267:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen'''
| width="90%" class="mtx-class-macrohead" | '''TCPListen'''
|-
|-
| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages). 
| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages). 
Line 1,286: Line 1,286:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TCPListen_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TCPListen_Sim'''
|-
|-
| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages). 
| colspan="2" | This macro puts a previously opened TCP channel in "passive open" mode.  This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages). 
Line 1,305: Line 1,305:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd'''
| width="90%" class="mtx-class-macrohead" | '''TxEnd'''
|-
|-
| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data. 
| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data. 
Line 1,324: Line 1,324:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxEnd_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TxEnd_Sim'''
|-
|-
| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data. 
| colspan="2" | Once the transmit buffer has been filled with data, call this macro to actually send the data. 
Line 1,343: Line 1,343:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte'''
| width="90%" class="mtx-class-macrohead" | '''TxSendByte'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information. 
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information. 
Line 1,367: Line 1,367:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendByte_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TxSendByte_Sim'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information. 
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a single byte of data, or with a string of information. 
Line 1,391: Line 1,391:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP'''
| width="90%" class="mtx-class-macrohead" | '''TxSendMyIP'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page. 
| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page. 
Line 1,410: Line 1,410:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyIP_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TxSendMyIP_Sim'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page. 
| colspan="2" | This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page. 
Line 1,429: Line 1,429:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC'''
| width="90%" class="mtx-class-macrohead" | '''TxSendMyMAC'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page. 
| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page. 
Line 1,448: Line 1,448:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendMyMAC_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TxSendMyMAC_Sim'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page. 
| colspan="2" | This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page. 
Line 1,467: Line 1,467:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString'''
| width="90%" class="mtx-class-macrohead" | '''TxSendString'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information. 
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information. 
Line 1,496: Line 1,496:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxSendString_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TxSendString_Sim'''
|-
|-
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information. 
| colspan="2" | This macro fills the specified channel's transmit buffer with data.  It can fill the buffer with a string of information. 
Line 1,525: Line 1,525:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart'''
| width="90%" class="mtx-class-macrohead" | '''TxStart'''
|-
|-
| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened. 
| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened. 
Line 1,544: Line 1,544:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-comp-macro.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''TxStart_Sim'''
| width="90%" class="mtx-class-macrohead" | '''TxStart_Sim'''
|-
|-
| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened. 
| colspan="2" | This macro indicates the start of data transmission for the specified buffer.  In TCP mode, data transmission can only begin once the socket has become established.  In other modes, data transmission can occur as soon as the socket has been opened. 
Line 1,564: Line 1,564:
|-
|-
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-prop-icon.png]]
| width="10%" align="center" class="mtx-class-macrohead" | [[File:Fc9-prop-icon.png]]
| width="90%" style="background-color:#D8C9D8; color:#4B008D;" | '''Properties'''  
| width="90%" class="mtx-class-macrohead" | '''Properties'''  
|-
|-
|}
|}

Latest revision as of 14:23, 13 July 2026

Author Matrix Ltd
Version 2.0
Category Comms: Networking


TCP/IP DUMMY component

TCP/IP component designed to work with the WIZ3100 range of modules from Wiznet. Also available in the form of the version 1 EB023 E-block which uses the NM7010A module.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_TCPIP_EB023-00-1_Dummy.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_TCPIP_EB023-00-1_Dummy.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples







Macro reference

CreateIPSocket

CreateIPSocket
Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3. Note that sockets with different modes can be opened on different channels. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Protocol
Specifies which IP protocol to use 
- BYTE Broadcast
Allows broadcast type packets to be sent and received 
- BYTE Return


CreateIPSocket_Sim

CreateIPSocket_Sim
Note that sockets on up to 4 channels can be simultaneously opened and these channels are numbered 0 to 3. Note that sockets with different modes can be opened on different channels. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Protocol
Specifies which IP protocol to use 
- BYTE Broadcast
Allows broadcast type packets to be sent and received 
- BYTE Return


CreateMACSocket

CreateMACSocket
This macro creates a socket for sending and receiving Ethernet data using raw data. 
- BYTE Promiscuous
Receive everything (1) or just data bound for your MAC (0) 
- BYTE Broadcast
Allows broadcast messages to be accepted (1) or rejected (0) 
- BYTE Error
Allowsmessages with errors to be accepted (1) or rejected (0) 
- BYTE Return


CreateMACSocket_Sim

CreateMACSocket_Sim
This macro creates a socket for sending and receiving Ethernet data using raw data. 
- BYTE Promiscuous
Receive everything (1) or just data bound for your MAC (0) 
- BYTE Broadcast
Allows broadcast messages to be accepted (1) or rejected (0) 
- BYTE Error
Allowsmessages with errors to be accepted (1) or rejected (0) 
- BYTE Return


CreateTCPSocket

CreateTCPSocket
This macro creates a socket for sending and receiving TCP data. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Src_Port_Hi
Port High Byte 
- BYTE Src_Port_Lo
Port Low Byte 
- BYTE Return


CreateTCPSocket_Sim

CreateTCPSocket_Sim
This macro creates a socket for sending and receiving TCP data. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Src_Port_Hi
Port High Byte 
- BYTE Src_Port_Lo
Port Low Byte 
- BYTE Return


CreateUDPSocket

CreateUDPSocket
This macro creates a socket for sending and receiving UDP data. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Src_Port_Hi
Port High Byte 
- BYTE Src_Port_Lo
Port Low Byte 
- BYTE Return


CreateUDPSocket_Sim

CreateUDPSocket_Sim
This macro creates a socket for sending and receiving UDP data. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Src_Port_Hi
Port High Byte 
- BYTE Src_Port_Lo
Port Low Byte 
- BYTE Return


GetSocketStatus

GetSocketStatus
This returns the state of the requested channel's socket. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


GetSocketStatus_Sim

GetSocketStatus_Sim
This returns the state of the requested channel's socket. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


Initialise

Initialise
Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros  
- VOID Return


InitialiseSim

InitialiseSim
Resets and initialises the Internet E-Block. It sets up the gateway address, subnet mask, device IP address and device MAC address as defined in the properties of the Flowcode component. This macro must be called before any other TCP_IP component macros  
- VOID Return


RxDataAvailable

RxDataAvailable
This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received. A positive return value indicates that data is available. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxDataAvailable_Sim

RxDataAvailable_Sim
This macro is used to check whether or not data has been received by the Internet E-Block. A return value of zero indicated that no data has been received. A positive return value indicates that data is available. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxDataSize

RxDataSize
This macro is used to detect the size of data collected by the Rx_data_available macro. 
- BYTE Channel
Specifies the communications channel 0-3 
- UINT Return


RxDataSize_Sim

RxDataSize_Sim
This macro is used to detect the size of data collected by the Rx_data_available macro. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxFlushData

RxFlushData
Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


RxFlushData_Sim

RxFlushData_Sim
Once data reception has been completed, this macro should be called to discard the data packet and allow other data packets to be read. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


RxMatchMyIP

RxMatchMyIP
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxMatchMyIP_Sim

RxMatchMyIP_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxMatchMyMAC

RxMatchMyMAC
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's MAC address entered in the component's property page. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxMatchMyMAC_Sim

RxMatchMyMAC_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as the Internet E-block's IP address. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxMatch_2_Bytes

RxMatch_2_Bytes
This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 4 bytes and 6 bytes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Byte1
Specifies the value of the first byte 
- BYTE Byte2
Specifies the value of the second byte 
- BYTE Return


RxMatch_2_Bytes_Sim

RxMatch_2_Bytes_Sim
This macro returns a non-zero value when the next 2 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 4 bytes and 6 bytes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Byte1
Specifies the value of the first byte 
- BYTE Byte2
Specifies the value of the second byte 
- BYTE Return


RxMatch_4_Bytes

RxMatch_4_Bytes
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 6 bytes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Byte1
Specifies the value of the first byte 
- BYTE Byte2
Specifies the value of the second byte 
- BYTE Byte3
Specifies the value of the third byte 
- BYTE Byte4
Specifies the value of the fourth byte 
- BYTE Return


RxMatch_4_Bytes_Sim

RxMatch_4_Bytes_Sim
This macro returns a non-zero value when the next 4 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 6 bytes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Byte1
Specifies the value of the first byte 
- BYTE Byte2
Specifies the value of the second byte 
- BYTE Byte3
Specifies the value of the third byte 
- BYTE Byte4
Specifies the value of the fourth byte 
- BYTE Return


RxMatch_6_Bytes

RxMatch_6_Bytes
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 4 bytes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Byte1
Specifies the value of the first byte 
- BYTE Byte2
Specifies the value of the second byte 
- BYTE Byte3
Specifies the value of the third byte 
- BYTE Byte4
Specifies the value of the fourth byte 
- BYTE Byte5
Specifies the value of the fifth byte 
- BYTE Byte6
Specifies the value of the sixth byte 
- BYTE Return


RxMatch_6_Bytes_Sim

RxMatch_6_Bytes_Sim
This macro returns a non-zero value when the next 6 bytes of data in the specified channel's reception buffer are the same as those passed as parameters. There are similar functions that check for 2 bytes and 4 bytes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Byte1
Specifies the value of the first byte 
- BYTE Byte2
Specifies the value of the second byte 
- BYTE Byte3
Specifies the value of the third byte 
- BYTE Byte4
Specifies the value of the fourth byte 
- BYTE Byte5
Specifies the value of the fifth byte 
- BYTE Byte6
Specifies the value of the sixth byte 
- BYTE Return


RxReadByte

RxReadByte
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxReadByte_Sim

RxReadByte_Sim
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Return


RxReadHeader

RxReadHeader
Once data in a particular channel has been received, the header will be filled with information about the received data. This macro will return the information in the header. The idx parameter specifies which byte of information in the header to read  
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Idx
Specifies the byte index to return 
- BYTE Return


RxReadHeader_Sim

RxReadHeader_Sim
A call to this macro will return a byte of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Idx
 
- BYTE Return


RxReadString

RxReadString
A call to this macro will return a string of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Length
 
- STRING Return


RxReadString_Sim

RxReadString_Sim
A call to this macro will return a string of data in the reception buffer of the specified channel. It will also internally increment a pointer to that data so that the next call to 'Rx_readbyte' (or any other read function) will read the next byte  
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Length
 
- STRING Return


RxSkipBytes

RxSkipBytes
Often when receiving data packets, it may be necessary to ignore large sections of the data. This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Count
Specifies how many bytes to skip 
- VOID Return


RxSkipBytes_Sim

RxSkipBytes_Sim
Often when receiving data packets, it may be necessary to ignore large sections of the data. This can be achieved by reading each byte individually (and ignoring the returned data), but a better way is to use this Rx_skipbytes macro. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Count
Specifies how many bytes to skip 
- VOID Return


SetDestination

SetDestination
This is used in IP and UDP modes to set the destination of the intended data transfer. The destination IP address needs to be set for both IP and UDP modes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Dst_IP0
Specifies the first byte of an IP address 
- BYTE Dst_IP1
Specifies the second byte of an IP address 
- BYTE Dst_IP2
Specifies the third byte of an IP address 
- BYTE Dst_IP3
Specifies the fourth byte of an IP address 
- BYTE Dst_Port_Hi
Port High Byte 
- BYTE Dst_Port_Lo
Port Low Byte 
- BYTE Return


SetDestination_Sim

SetDestination_Sim
This is used in IP and UDP modes to set the destination of the intended data transfer. The destination IP address needs to be set for both IP and UDP modes. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Dst_IP0
Specifies the first byte of an IP address 
- BYTE Dst_IP1
Specifies the second byte of an IP address 
- BYTE Dst_IP2
Specifies the third byte of an IP address 
- BYTE Dst_IP3
Specifies the fourth byte of an IP address 
- BYTE Dst_Port_Hi
Port High Byte 
- BYTE Dst_Port_Lo
Port Low Byte 
- VOID Return


SetMyIP

SetMyIP
This macro sets up the Internet E-Block's own IP address. In most circumstances, this macro will not be required as the IP address setting in the component property page will remain constant throughout your application. 
- BYTE IP0
First Byte of IP address 
- BYTE IP1
Second Byte of IP address 
- BYTE IP2
Third Byte of IP address 
- BYTE IP3
Fourth Byte of IP address 
- VOID Return


TCPClose

TCPClose
When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TCPClose_Sim

TCPClose_Sim
When an established TCP connection has finished transmission of data, either the local application (i.e. your code) or the remote application (i.e. the application at the other end of the connection) can initiate closure of the socket. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TCPConnect

TCPConnect
This macro puts a previously opened TCP channel in "active open" mode. This is the required mode when writing a TCP client application (e.g. using SMTP to send an email). 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Dst_IP0
First Byte of IP address 
- BYTE Dst_IP1
Second Byte of IP address 
- BYTE Dst_IP2
Third Byte of IP address 
- BYTE Dst_IP3
Fourth Byte of IP address 
- BYTE Dst_Port_Hi
High Byte of destination port 
- BYTE Dst_Port_Lo
Low Byte of destination port 
- BYTE Return


TCPConnect_Sim

TCPConnect_Sim
This macro puts a previously opened TCP channel in "active open" mode. This is the required mode when writing a TCP client application (e.g. using SMTP to send an email). 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Dst_IP0
First Byte of IP address 
- BYTE Dst_IP1
Second Byte of IP address 
- BYTE Dst_IP2
Third Byte of IP address 
- BYTE Dst_IP3
Fourth Byte of IP address 
- BYTE Dst_Port_Hi
High Byte of destination port 
- BYTE Dst_Port_Lo
Low Byte of destination port 
- BYTE Return


TCPListen

TCPListen
This macro puts a previously opened TCP channel in "passive open" mode. This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages). 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TCPListen_Sim

TCPListen_Sim
This macro puts a previously opened TCP channel in "passive open" mode. This is the required mode when writing a TCP server application (e.g. a web server to display HTML web pages). 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxEnd

TxEnd
Once the transmit buffer has been filled with data, call this macro to actually send the data. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxEnd_Sim

TxEnd_Sim
Once the transmit buffer has been filled with data, call this macro to actually send the data. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxSendByte

TxSendByte
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a single byte of data, or with a string of information. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Data
Data byte to append to Tx buffer. 
- VOID Return


TxSendByte_Sim

TxSendByte_Sim
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a single byte of data, or with a string of information. 
- BYTE Channel
Specifies the communications channel 0-3 
- BYTE Data
Data byte to append to Tx buffer. 
- VOID Return


TxSendMyIP

TxSendMyIP
This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxSendMyIP_Sim

TxSendMyIP_Sim
This macro fills the specified channel's transmit buffer with 4 bytes of data representing this Internet E-Block's IP address as specified in the component's property page. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxSendMyMAC

TxSendMyMAC
This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxSendMyMAC_Sim

TxSendMyMAC_Sim
This macro fills the specified channel's transmit buffer with 6 bytes of data representing this Internet E-Block's MAC address as specified in the component's property page. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxSendString

TxSendString
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a string of information. 
- BYTE Channel
Specifies the communications channel 0-3 
- STRING Data
Data byte to append to Tx buffer. 
- BYTE Length
 
- VOID Return


TxSendString_Sim

TxSendString_Sim
This macro fills the specified channel's transmit buffer with data. It can fill the buffer with a string of information. 
- BYTE Channel
Specifies the communications channel 0-3 
- STRING Data
Data byte to append to Tx buffer. 
- BYTE Length
 
- VOID Return


TxStart

TxStart
This macro indicates the start of data transmission for the specified buffer. In TCP mode, data transmission can only begin once the socket has become established. In other modes, data transmission can occur as soon as the socket has been opened. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


TxStart_Sim

TxStart_Sim
This macro indicates the start of data transmission for the specified buffer. In TCP mode, data transmission can only begin once the socket has become established. In other modes, data transmission can occur as soon as the socket has been opened. 
- BYTE Channel
Specifies the communications channel 0-3 
- VOID Return


Property reference

Properties
Retrieved from "https://www.flowcode.co.uk/wiki/index.php?title=Component:_TCP/IP_DUMMY_(NM7010A)_(Comms:_Networking)&oldid=46785"